How do I switch on/activate the alarm system?
Press button Cand leave the premises immediately.
Enter the 4 digit code followed by the button Aand leave the premises immediately.
How do I switch off the alarm system?
Enter the 4 digit code only.
How can I change the code?
Enter the 4 digit code, press G times 3, press E, press G, press E, select which code to edit between 1 to 9, press G,
enter your desired 4 digit code & press E. Press button F for 3 times.
If I am in a panic situation and I need to call for help,
what can I do?
Press button 1& button 3simultaneously and keep them pressed for 2 seconds.
If the alarm rings,
how can I know which sensor triggered it?
Enter the 4 digit code to switch off the system. System will show you the exact zone which has been triggered.
Enter the 4 digit code to switch off the system and if the alarm shows !!!!CHECK!!!! on display,
press the 4 digit code again and press button F .
What do I have to press if there is a power cut to make
sure that my alarm is set properly when the electricity
is back on?
Enter the 4 digit code and press button D.
