DIGITAL
OUTPUT
DIGITAL
OUTPUT
RISK OF ELECTRIC SHOCK!RISK OF ELECTRIC SHOCK!
CLASS 1CLASS 1
LASER PRODUCTLASER PRODUCT
!
CAUTION
DO NOT OPENDO NOT OPEN
ALCHEMIST
DISC
SERIAL NUMBER:
COMPACT
AC1
MAINS INPUT.
AC ONLY~
MAINS INPUT.
AC ONLY~
Peak Power Consumption: 12WPeak Power Consumption: 12W
CLASS 1 AUDIO PRODUCTCLASS 1AUDIO PRODUCT DO NOT REMOVE ANY CHASSIS PANELS FOR RISK OF ELECTRIC SHOCK. NO USER SERVICEABLE PARTS INSIDE - REFER ALL SERVICING TO QUALIFIED PERSONNEL.DO NOT REMOVE ANY CHASSIS PANELS FOR RISK OF ELECTRIC SHOCK. NO USER SERVICEABLE PARTS INSIDE -REFER ALL SERVICING TO QUALIFIED PERSONNEL.
BALANCED
AUDIO
OUTPUT
BALANCED
AUDIO
OUTPUT
RIGHT LEFT
LEFT
RIGHT
RCA
AUDIO
OUTPUT
RCA
AUDIO
OUTPUT
Specially manufactured by Alchemist Products Ltd. Specifications in UK.Specially manufactured by Alchemist Products Ltd. Specifications in UK.
SOURCE CONNECTIONS
As with connections ensure that the equipment is switched off before you attempt to connect any
cables.
all
.
As the phono sockets on the AC1 are gold plated, we recommend that, where possible you use gold
phono plugs on your interconnect leads. Gold to gold connections will ensure that a good electrical
contact is maintained without the need for periodic cleaning
Take care that your input leads are correctly oriented for Right and Left channels. RED is usually
Right and WHITE or BLACK is usually Left.
The AC1 has the facility to connect to your amplifier via the analogue outputs and to your DAC via
the digital output connection. The analogue connection is also available in two forms. Via a standard
RCA connector or via the balanced connectors.
GENERAL CARE
Any cleaning of your AC1 CD player should be done with a clean dry cloth. Do not use any
solvent or silicone based cleaning solutions.
Remember to replace all of your packaging in the box and re-seal. Keep the box for future
transportation of your product.
GENERAL CAUTIONS
FCC Warning.
The AC1 may use or generate radio frequency. Please note that, if any unauthorised modifications are
made, the user may loose the right to operate this equipment.
If installed properly, the AC1 should not cause harmful interference to radio communications.
However, there is no guarantee that, in certain installations, such interference will not occur. If
interference does arise (and this can be determined by switching the unit off and on), then try the
following:
1, Increase the distance between the offending units
2, Connect the AC1 to a different mains supply to that of the affected unit.
3, For further advise or help please consult your dealer or an appointed engineer.
Please note: that when the cover of the AC1 has been removed there may bee some stray invisible
radiation from the laser assembly. Never look directly into the exposed beam.
