ALcom DT-830 Manuale utente
Owner’s Manual
ALCOM DT-830
1.8GHz DECT Phone, CID
Content
SAFETY INFORMATION ............................................................. 4
GETTING STARTED.................................................................... 5
Key Layout ........................................................................... 5
LCD display on the handset ................................................. 6
Basic steps to install ............................................................ 7
Charging the handset........................................................... 8
BASIC OPERATIONS .................................................................. 9
During standby..................................................................... 9
Answering an incoming external call.................................... 9
Making an external call ...................................................... 10
Normal dialing ................................................ 10
Predialing....................................................... 10
Dialing from a phonebook record................... 10
Redialing the last dialed number.................... 11
During an external call ....................................................... 11
Call timer........................................................ 11
Adjusting the volume...................................... 11
Muting the call................................................ 12
Chain dialing .................................................. 12
Receiving a second call ................................. 12
CALLER ID................................................................................. 13
Reviewing CID records ...................................................... 13
Call back from a CID record............................................... 13
Saving a CID record to phonebook .................................... 14
Deleting a CID record ........................................................ 14
Deleting the entire call log.................................................. 14
LAST NUMBER DIALED ............................................................ 15
Viewing the last number dialed .......................................... 15
Storing a previously dialed number into phonebook .......... 15
Deleting a previously dialed number .................................. 16
USING THE PHONEBOOK........................................................ 16
Adding phonebook records ................................................ 16
Editing phonebook records ................................................ 17
2
Deleting a phonebook record............................................. 17
Deleting the entire phonebook ........................................... 18
PROGRAMMING THE PHONE.................................................. 18
Handset ringer melody & volume ....................................... 18
Recall duration ................................................................... 19
Dial mode........................................................................... 19
Register.............................................................................. 20
Deregister .......................................................................... 20
PIN code ............................................................................ 21
Reset ................................................................................. 21
OTHER FEATURES................................................................... 21
Key lock ............................................................................. 21
Shortcut to turn handset ringer on/off................................. 22
Message waiting indication ................................................ 22
Paging the handsets .......................................................... 22
Out of range warning ......................................................... 22
MULTI-HANDSET OPERATION ................................................ 23
Answering an internal call .................................................. 23
Making an internal call ....................................................... 23
During an external call ....................................................... 24
Inquiry call...................................................... 24
Call transfer ................................................... 24
Conference call .............................................. 24
DEFAULT SETTING................................................................... 24
TROUBLESHOOTING ............................................................... 25
CONFORMANCE TO REGULATION......................................... 26
3
This telephone is not designed for making emergency telephone
calls when the power fails. Make alternative arrangements for
access to emergency services.
SAFETY INFORMATION
SAFETY INFORMATION
Read the safety instructions before first use of this phone.
•Use only the batteries supplied with this telephone.
•Do not use any mains adapter other than the one provided
otherwise you may permanently damage your phone.
•Do not use the phone in damp humid conditions such as a
bathroom. Do not expose the phone or batteries to water or
fire.
•Do not dispose of used batteries with household waste or by
burning.
•Do not use the handset in an explosive hazard area.
•To prevent electric shock, never try to open the base or
handset enclosure.
•Avoid metallic contact (e.g. metal clips, keys) between the
battery contacts and charging conductors.
•There is a slight chance that your phone could be damaged
by an electrical storm. It is recommended that you unplug
your phone from the mains supply and telephone socket
during a storm.
Because the phone works by sending radio signals between base
station and handset, wearers of hearing aids may experience
interference in the form of a humming noise.
We advise that this phone should not be used near intensive care
medical equipment or by persons with pacemakers.
Your phone can interfere with electrical equipment such as
answering machines, TV and radio sets, clock radios and
computers if placed too close. It is recommended that you
position the base unit at least one meter from such appliances.
4
GETTING STARTED
GETTING STARTED
Key Layout
5
LCD display on the handset
Mute
Ringer
Tone / Pulse
Recall
duration
Battery
Signal
Left Arrow
Character
Display
Registration
programming
Handset
Ringer
Setting
Right
Arrow
Phonebook
Key lock Off hook New CID
Message
waiting
Ringer Off
The handset is linked to the base.
Displays the current battery level. It scrolls
during charging.
Use to set the handset ringer.
Use to set the recall duration.
Use to set the handset for tone/pulse dialing.
Use to register the handset.
There are more digits on the left.
There are more digits on the right.
The ringer is turned off.
The keypad is locked.
Phonebook records are being reviewed.
The phone is in use. It blinks during ringing.
6
The call is muted.
There is a new CID record or CID records are
being reviewed.
The CID being reviewed is a new call.
There is a new message.
Basic steps to install
1. Connect the output plug of the mains adapter to the
adapter socket on the back of the base unit and the
mains adapter to the wall mains supply.
2. Connect the telephone lead to the phone cord socket
on the back of the base unit and to the wall phone
socket.
3. Remove the battery door on the handset by pressing
the catch between the charging connectors and lift.
4. Insert 2 x AAA rechargeable batteries, observing their
polarities, into the battery compartment.
5. Replace the battery door firmly into place.
6. Place the handset on the base unit and let the batteries
charge for a full 14 hours before using.
Use only the mains adapter supplied with this telephone.
Incorrect adapter polarity or voltage can seriously damage
the unit.
Input: 230 VAC 50 Hz
Output: 6 VDC 250 mA
7
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. Refer to the original type supplied with
this telephone. NiMH batteries must be disposed of in
accordance with applicable waste disposal regulations.
Charging the handset
An empty battery icon indicates the batteries need
recharging. Place the handset on the base cradle to
recharge the batteries. The handset battery icon
scrolls
during charging. Handset may take some time to power up
and it may get warm during initial charge. This is normal. A
handset reaching a very low battery voltage level will go
into sleep mode, displaying LOW BATT on the screen.
Get into the habit of putting the handset on the base unit to
charge when it is not in use to ensure the handset is always
fully charged.
8
BASIC OPERATIONS
BASIC OPERATIONS
During standby
ALCOM 1
When the phone is in standby, the LCD displays the
handset label. The handset number related to the
connected base will also be displayed right justified. The
battery icon reflects the current battery level and the signal
icon indicates the handset is linked to the base.
Answering an incoming external call
JOHN SMITH
When there is an incoming call, the phone rings and
flashes. If a CID record is received, the caller information is
displayed.
turns on if the phone number contains more than 12
digits. In this case, only the last 12 digits are displayed.
If you press when the phone is ringing, the handset
ringer will be turned off for this incoming call.
1. Press to answer the call. turns on.
2. Call timer is displayed 10 seconds after the call is
connected.
3. Press or place the handset on the base cradle to
disconnect.
9
Making an external call
Your phone allows you to dial out a phone number in
various ways.
Normal dialing
1. Press and wait for the dial tone.
2. Use the number pad to dial the phone number. The
display shows the digits as you enter them.
3. When you enter more than 12 digits, turns on. In this
case, you only see the last 12 digits on the screen.
Predialing
Pre-dial allows you to enter a telephone number and verify
it on the screen before you place the call. The screen
displays the last 12 digits dialed but you can enter up to 20
digits.
1. Enter the phone number.
2. To enter a pause, press and hold . A pause is
displayed as “P”.
3. When you enter more than 12 digits, turns on. If you
attempt to enter more than 20 digits, you’ll hear a reject
tone.
4. If you make a mistake, press DEL to erase one digit
at a time. Or you can press to clear the entire
number and return the phone to standby.
5. Press to dial out the number.
Dialing from a phonebook record
1. Press . during standby. in the display turns on.
2. Press to search for the record that you
would like to dial.Or you can use the number keys to
10
Indice
Lingue:
Altri manuali ALcom Telefono senza fili
ALcom
ALcom Colombo Combo Manuale utente
ALcom
ALcom SN200 Manuale utente
ALcom
ALcom CL-3332 IDM Manuale utente
ALcom
ALcom CL-3375 Manuale utente
ALcom
ALcom CL-3350 INF Manuale utente
ALcom
ALcom ADT800 Manuale utente
ALcom
ALcom Lifestyle 1900 Manuale utente
ALcom
ALcom BL100 Manuale utente
ALcom
ALcom CL-3399 ID Manuale utente
ALcom
ALcom AT6128 Manuale utente
