ALDI Ferrex IS08 Manuale utente

Great care has gone into the manufacture of this product and it should there-

fore provide you with years of good service when used properly. In the event

of product failure within its intended use over the course of the first 3 years af-

ter date of purchase, we will remedy the problem as quickly as possible once

it has been brought to our attention. In the unlikely event of such an

occurrence, or if you require any information about the product, please con-

tact us via our helpline support services, details of which are to be found both

in this manual and on the product itself.

PRODUCED IN CHINA FOR:

ALDI STORES LTD. PO BOX 26, ATHERSTONE

WARWICKSHIRE, CV9 2SH.

Visit us at www.aldi.com

AFTER SALES SUPPORT 809147

[email protected]

MODEL:

IS08 10/2021

+44 (0) 1904727501

YEAR

WARRANTY

User Manual

20 V LI-ION CORDLESS

IMPACT DRIVER

Original User Manual

Scope of delivery

Cordless Impact Driver

Beltclip

Bit set

Operating manual and warranty card (not depicted)

Scope of delivery

Table of content

Overview..................................................................................................................2

Scope of delivery.....................................................................................................3

General information................................................................................................5

Reading and storing the operating manual..................................................................5

Proper use...........................................................................................................................5

Explanation of symbols...........................................................................................6

Safety.......................................................................................................................6

General safety notes for power tools.............................................................................. 7

Special safety instructions for the impact driver.......................................................... 11

Additional safety notes for power tools.........................................................................11

Operating Controls................................................................................................. 13

Before ﬁrst use.......................................................................................................14

Check the device and scope of delivery........................................................................14

Cleaning the device and accessories.............................................................................14

Attaching the belt clip......................................................................................................14

Operation............................................................................................................... 15

Inserting bits..................................................................................................................... 15

Insert / Remove Battery...................................................................................................15

Tightening and loosening screws..................................................................................16

Cleaning..................................................................................................................17

Maintenance...........................................................................................................17

Testing.................................................................................................................... 17

Storage................................................................................................................... 17

Troubleshooting.................................................................................................... 18

Technical data........................................................................................................ 18

Declaration of conformity..................................................................................... 20

Disposal..................................................................................................................22

Disposing of packaging...................................................................................................22

Dispose of old electrical device...................................................................................... 22

Table of content

General information

Reading and storing the operating manual

This operating manual is part of the 20V Li-Ion Cordless Impact Driver

(hereinafter also called "device"). It contains important information on

how to set up and use the product.

Before using the device, read the operating manual carefully, in particular

the safety instructions. Failure to follow this operating manual may lead to severe

injuries or product damage.

This user manual is based on the standards and regulations that are valid within the

European Union. Outside the EU, please also note the country-speciﬁc directives and

laws.

Keep this operating manual for future reference. If you pass this device on to a third

party, you must also supply this operating manual.

Residual risks

Despite proper use, hidden residual risks cannot be completely excluded.

Depending on the type of device, the following risks may occur:

-Health risks which may result from vibration emissions if the device is used for a

long period of time or is not properly used or maintained.

-Injuries and material damage, which are caused by the moving blade or

breaking tool heads.

- Health risks may result from working with toxic or hazardous materials (eg.

asbestos) or if appropriate personal protection, due to hazardous material use, is

not applied.

Proper use

This device is designed for tightening or loosening screwed

connections..

This device is intended for private use only and is not suitable for

commercial use. Use the device only as described in this operating

manual. Any other use is improper and may lead to product

damage or even personal injury. This device is not a toy.

The manufacturer or retailer assume no liability for damage

caused by improper or incorrect use.

General information

Explanation of symbols

The following symbols and signal words are used in this user manual, on the device

or on the packaging.

This symbol provides you with useful additional information on

handling and use.

Declaration of conformity (see chapter “Declaration of conformity”):

Products marked with this symbol meet all the applicable Community

regulations of the European Economic Area.

The new UKCA (UK Conformity Assessed) marking declares that the

product conforms to all applicable U.K. legislative requirements and

that appropriate conformity assessment procedures have been

successfully completed.

Read the operating manual.

Wear protective goggles.

Wear hearing protection.

Wear a dust mask.

Safety

The following signal words are used in this operating manual.

WARNING! This signal symbol/word denotes a

hazard with an average risk level that

could lead to death or severe injury if

it is not avoided.

Explanation of symbols

CAUTION! This signal symbol/word denotes a

hazard with a low risk level that could

lead to mild or moderate injury if it is

not avoided.

NOTE! This signal word provides a warning

about potential material damage.

General safety notes for power tools

WARNING!

Read all safety notes, instructions, illustrations and technical

data provided with this power tool. Failure to follow the

instructions below may result in electric shock, ﬁre and/or

serious injury.

Keep all safety notes and instructions for future reference.

The term "power tool" used in the safety notes refers to both

mains-operated power tools (with power cord) and battery-

powered power tools (without power cord).

Workplace safety

-Keep your work area tidy and well lit.

Clutter or unlit work

areas can lead to accidents.

-Do not operate power tools in explosive atmospheres,

such as in the presence of ﬂammable liquids, gases or

dust.

Power tools create sparks which may ignite the dust or

fumes.

-Keep children and bystanders away while operating a

power tool.

Distractions can cause you to lose control.

Electrical safety

-Power tool plugs must match the outlet. Never modify the

plug in any way. Do not use any adapter plugs with

Safety

earthed (grounded) power tools.

Unmodiﬁed plugs and

matching outlets will reduce risk of electric shock.

-Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators.

There is

an increased risk of electric shock if your body is earthed or

grounded.

-Do not expose power tools to rain or wet conditions.

Water

entering a power tool will increase the risk of electric shock.

Personal safety

-Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

tool while you are tired or under the inﬂuence of drugs,

alcohol or medication.

A moment of inattention while

operating power tools may result in serious personal injury.

-Use personal protective equipment. Always wear eye

protection.

Protective equipment such as a dust mask, non-

skid safety shoes, hard hat or hearing protection used for

appropriate conditions will reduce personal injuries.

-Prevent unintentional starting. Ensure the switch is in the

off-position before connecting to power source and/or

battery pack, picking up or carrying the tool.

Carrying

power tools with your ﬁnger on the switch or energising

power tools that have the switch on invites accidents.

-Remove any adjusting key or wrench before turning the

power tool on.

A wrench or a key left attached to a rotating

part of the power tool may result in personal injury.

-Do not overreach. Keep proper footing and balance at all

times.

This enables better control of the power tool in

unexpected situations.

Safety

-Dress properly. Do not wear loose clothing or jewellery.

Keep your hair and clothing away from moving parts.

Loose clothes, jewellery or long hair can be caught in moving

parts.

-If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used.

Use of dust collection can

reduce dust-related hazards.

-Do not let familiarity gained from frequent use of tools

allow you to become complacent and ignore tool safety

principles.

A careless action can cause severe injury within a

fraction of a second.

Using and handling the power tool

-Do not overload the power tool. Use the appropriate

power tool for your work.

The right power tool allows you to

work better and safer in the speciﬁed power range.

-Do not use any power tool that has a defective switch.

Power tools that can no longer be switched on or off are

dangerous and must be repaired.

-Disconnect the plug from the socket and/or remove any

removable batteries before making adjustments to the

device, changing any insert tool parts, or putting the

power tool away.

This precaution helps prevent

unintentional starting of the power tool.

-Keep power tools out of the reach of children when not in

use. Whoever is not familiar with the power tool or who

has not read these instructions should not be allowed to

use it.

Power tools are dangerous if used by inexperienced

persons.

-Power tools and insert tools must be subject to careful

maintenance. Check whether moving parts function

Safety

properly without jamming, and whether parts are broken

or damaged to such an extent that they impair the

functions of the power tool. Have damaged parts repaired

before using the power tool.

Many accidents happen due to

poorly maintained power tools.

-Keep cutting tools sharp and clean.

Carefully maintained

cutting tools with sharp blades tend to jam less and are easier

to guide.

-Use power tools, insert tools, insert tool parts, etc.

according to these instructions. While doing so, take into

account the working conditions and the activity to be

performed.

The use of power tools for applications other

than those intended can lead to dangerous situations.

-Keep handles and grip surfaces dry, clean and free of oil

and grease.

Slippery handles and grip surfaces hinder safe

operation and control of the power tool in unforeseen

situations.

Using and handling the cordless tool

-Only charge the batteries using chargers recommended

by the manufacturer.

Chargers suitable for a particular type

of battery may present a ﬁre hazard if used with other

batteries.

-Only use purposely provided batteries in the power tools.

The use of other batteries may lead to injuries and present a

ﬁre hazard.

-Keep unused batteries away from paper clips, coins, keys,

nails, screws, or other small metal objects that could short

the contacts.

A short circuit between the battery contacts can

cause burns or ﬁre.

-If used incorrectly, ﬂuid may leak from the battery. Avoid

touching it. In case of accidental contact, rinse with water.

Safety

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ALDI Avvitatore a impulsi

ALDI

ALDI FERREX FID 20-I Manuale utente

Manuali Avvitatore a impulsi popolari di altre marche

stayer

stayer IW500D Manuale utente

Makita

Makita DTD152 Manuale utente

Milwaukee

Milwaukee M12 FID Manuale utente

Grizzly

Grizzly H6140 Manuale utente

Makita

Makita BTW450 Manuale utente

Ozito

Ozito LID-3000 Manuale utente

Astro Pneumatic Tool

Astro Pneumatic Tool 1812 Manuale utente

Greenlee

Greenlee HW3 Manuale utente

Sthor

Sthor 57091 Manuale utente

Makita

Makita DTD145 Manuale utente

Hilti

Hilti SIW 2-A12 Manuale utente

Ryobi

Ryobi R18IW3 Manuale utente

Parkside

Parkside PDSSA 20-Li A1 Manuale utente

Flex

Flex FX1471 Manuale utente

SATA

SATA 51075C Manuale tecnico

Cembre

Cembre NR-11P Manuale utente

Makita

Makita BTP131RFE Manuale utente

DeWalt

DeWalt XR Li-ion DCF902 Manuale utente