ALDI FPHS 3.6Va Manuale utente
1
User Manual
3.6 V Li-ion
Pivot Handle Screwdriver
FPHS 3.6Va
ORIGINAL INSTRUCTIONS
FX-5902183-5902184-Bedien-2002.indd 1FX-5902183-5902184-Bedien-2002.indd 1 18.05.20 15:4518.05.20 15:45
2
1
2
3
6
4
5
13
11
12
7
10a
8
10
9
14
FX-5902183-5902184-Bedien-2002.indd 2FX-5902183-5902184-Bedien-2002.indd 2 18.05.20 15:4518.05.20 15:45
3
Package contents/device parts
1 LED charging level display
2 Button for LED charging status
3 Handle swivel lock
4 Switch for left/right rotation and trigger lock
5 On/ Off switch
6 Charging socket
7 LED working light
8 Tool holder ¼“ = 6.35 mm
9 Tool holder sleeve
10 Torque scale
10a Torque pre-selection with marking
11 Battery charger
12 Charging connector
13 Bit set
14 Magnetic bit holder
15 Storage case (not shown)
FX-5902183-5902184-Bedien-2002.indd 3FX-5902183-5902184-Bedien-2002.indd 3 18.05.20 15:4518.05.20 15:45
Table of contents
Package contents/device parts 3
General information 6
Reading and storing the user manual 6
Explanation of symbols 6
Safety 8
Explanation of notes 8
Proper use 8
Residual risks 11
General power tool safety warnings 11
Special safety instructions for screwdrivers 19
Safety instructions for chargers 19
Further safety instructions 23
Before use 24
Checking the product and scope of delivery 24
Charging the battery 24
Displaying the charging level 25
Use as a pivot handle screwdriver/
angled or straight 26
Fitting screwdriver bits 27
4
Table of contents
Table of contents
FX-5902183-5902184-Bedien-2002.indd 4FX-5902183-5902184-Bedien-2002.indd 4 18.05.20 15:4518.05.20 15:45
5
Table of contents
Use 27
Switching on and off 27
Left/right rotation, trigger lock 28
Setting the torque 28
Operating information 29
Maintenance, cleaning and storage 30
Maintenance 30
Cleaning 30
Storage 31
Faults and troubleshooting 31
Technical data 32
Noise/vibration information 33
Disposal 37
Disposing of used tools 37
Batteries and rechargeable batteries 38
Disposing of packaging 38
Service information 38
CE declaration of conformity 41
FX-5902183-5902184-Bedien-2002.indd 5FX-5902183-5902184-Bedien-2002.indd 5 18.05.20 15:4518.05.20 15:45
6
General information
General information
General information
Reading and storing the user manual
This user manual accompanies this 3.6 V
Li-Ion screwdriver (referred to below only
as the “screwdriver”). It contains important
information about start-up and handling.
Before using the screwdriver, read the user manual care-
fully. This particularly applies to the safety instructions.
Failure to heed this user manual may result in severe
injury or damage to the screwdriver.
The user manual is based on the standards and rules
in force in the European Union. When abroad, you must
also observe country-specific guidelines and laws.
Store the user manual for future use. If you pass the
cordless screwdriver on to third parties, please be abso-
lutely sure to include this user manual.
Explanation of symbols
The following symbols and signal words are used in this
user manual, on the screwdriver or on the packaging.
This symbol provides you with useful addi-
tional information about start-up or opera-
tion.
FX-5902183-5902184-Bedien-2002.indd 6FX-5902183-5902184-Bedien-2002.indd 6 18.05.20 15:4518.05.20 15:45
7
General information
Declaration of conformity (see chapter
“Declaration of conformity”): Products marked
with this symbol meet all applicable
Community regulations for the European
Economic Area.
This symbol identifies devices that are operat-
ed with direct current.
This symbol identifies double insulated elec-
tric devices.
This symbol shows the polarity of the device.
Products marked with this symbol may only
be operated in indoor areas.
Read the user manual before use.
Important! Read the user manual for the
charger.
FX-5902183-5902184-Bedien-2002.indd 7FX-5902183-5902184-Bedien-2002.indd 7 18.05.20 15:4518.05.20 15:45
8
Safety
Safety
Safety
Explanation of notes
The following symbols and signal words are used in
this user manual.
This signal symbol/word designates a hazard with mod-
erate degree of risk which may lead to death or severe
injury if not avoided.
CAUTION!
This signal symbol/word designates a hazard with low
risk that, if not avoided, may result in minor or moderate
injury.
NOTICE!
This signal word warns against potential damages to
property.
Proper use
The screwdriver is only designed for light screw driv-
ing.
FX-5902183-5902184-Bedien-2002.indd 8FX-5902183-5902184-Bedien-2002.indd 8 18.05.20 15:4518.05.20 15:45
9
Safety
The screwdriver has not been designed for commercial
use, use in the trades or for industrial applications; it
is only designed for private use in hobby and DIY pro-
jects.
The screwdriver may only be used in line with its
intended purpose. Any other kind of use is prohibited.
Proper use also includes compliance with the safety
instructions and operating notes in the user manual.
The manufacturer or vendor accepts no liability for
damage caused by improper or incorrect use.
Only accessories that are suitable for the screwdriver
may be used.
Those using the screwdriver and performing mainte-
nance work must be familiar with it and have under-
gone instruction on the potential risks. Furthermore,
every aspect of applicable accident prevention guide-
lines must be exactly adhered to.
Other general guidelines relating to occupational
medicine and safety must be observed. Modifications
to the screwdriver rule out any liability of the manu-
facturer and resulting damage.
FX-5902183-5902184-Bedien-2002.indd 9FX-5902183-5902184-Bedien-2002.indd 9 18.05.20 15:4518.05.20 15:45
10
Safety
Safety
Any other applications are expressly prohibited and
are deemed improper use.
• Using the screwdriver for other than the intended
purposes;
• Failure to observe the safety instructions and
warnings as well as the assembly, operating,
maintenance and cleaning instructions contained
in this user manual;
• Failure to comply with any regulations relating
to accident prevention, occupational medicine or
safety, which specifically and/or generally apply to
the use of the screwdriver;
• Use of accessories and spare parts not intended for
the screwdriver;
• Modifications to the screwdriver;
• Repairs of the screwdriver performed by parties
other than the manufacturer or a qualified profes-
sional;
• Use of the screwdriver for commercial or industri-
al applications as well as in connection with the
trades;
FX-5902183-5902184-Bedien-2002.indd 10FX-5902183-5902184-Bedien-2002.indd 10 18.05.20 15:4518.05.20 15:45
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali ALDI Cacciavite elettrico
