ALDI FERREX 704518 Manuale utente
User Manual
https://help.tools
Read all safety warnings and all instructions thoroughly before operating this product.
Ensure you keep your manual in a safe place for future reference.
IM Ed3 02/2021
MODEL No.: PBS101.A, PRODUCT No.: 704518
704518
1010W BELT SANDER
Product
Info
MODEL No.: PBS101.A, PRODUCT No.: 704518
QR codes take you where you want to go
quicky and easily
Whether you require product information, spare parts or accessories,
details on warranties or after sales service, or if you want to watch
a product demonstration video, our QR codes will take you there in
no time at all.
What is a QR code?
A QR-code (QR=Quick Response) is a type of matrix that can be read
with a smartphone camera and that contains a link to a website or
contact details, for example.
Advantage: You are not required to manually enter a website address
or contact details.
How it works
To scan the QR code, all you need is a smartphone with QR codes reader
software and an Internet connection*. This type of software can be
downloaded for free from your smartphone’s app store.
Try it out now
Just scan the QR code with your smartphone and
nd out more about the Aldi product you have
purchased*.
* Depending on your tari you may be charged
for the connection.
Product
Info
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION.
The product is guaranteed to be free from defects in workmanship and parts for a period of 36 months from the
date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired,
replaced or refunded at our discretion. The benets conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Warranty details
AFTER SALES SUPPORT
(toll free)
MODEL No.: PBS101.A •02/2021 •704518
3
MODEL No.: PBS101.A, PRODUCT No.: 704518
Contents
Pack contents / parts 2
Description of symbols 3
General Safety Warnings 4
Parts List 7
Assembly 8
Attaching the dust bag 8
Operation 8
Adjusting the auxiliary handle 8
On/o trigger 9
Switch lock-on button 9
Variable speed control dial 9
Belt centering control 10
Front plate 10
Working hints for your belt sander 10
Maintenance 11
Environmental Protection 12
Warranty 12
What your 3 year warranty means 13
Service Support 13
Accessories and after sales parts 14
Troubleshooting 15
Technical Specications 16
MODEL No.: PBS101.A, PRODUCT No.: 704518
Pack contents / parts
Congratulations on the purchase of your FERREX® 1010W Belt Sander. When
you open your packaging, rst remove all items and check there are no parts
damaged or missing. If you nd anything wrong, do not operate the product
until the parts have been replaced or the fault has been rectied. Failure to
do so could result in serious personal injury.
First time users or inexperienced operators pay particular attention to
the operation of the 1010W Belt Sander, including details of starting and
stopping and correct use of the 1010W Belt Sander on pages 8-11, as well as
the maintenance instructions on pages 11-12.
Intended use of 1010W Belt Sander
NOTE: This product is for private domestic DIY use only. It is not suitable for
commercial or trade use.
This 1010W Belt Sander is intended for dry sanding–with high removal
capacity–of wood, plastic, metal, ller as well as varnished surfaces.
The 1010W Belt Sander is to be used only for its prescribed purpose. Any
other use is deemed to be a case of misuse.
Contents of carton
1 x 1010W Belt Sander
1 x 80 grit sanding belt (tted)
1 x Dust bag
1 x Instruction manual
1 x Warranty Card & Certicate
2
WARNING! Please read and understand this instruction manual
before use and keep it for your future reference. Your product
should only be passed on together with this instruction manual.
MODEL No.: PBS101.A, PRODUCT No.: 704518
Description of symbols
3
The instruction manual, rating plate, or on the product itself, may show
these symbols. These represent important information about the product or
instructions on its use.
Read instruction manual before operating this machine
Warning
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulation
Conforms to relevant standards for electrical safety and electromagnetic
compatibility
36 Months Warranty
The box is recyclable at the kerbside.
The inserts are recyclable at the kerbside.
36
Box
MODEL No.: PBS101.A, PRODUCT No.: 704518
General safety warnings
4
WARNING: Read all safety warnings, instructions, illustrations and
specications provided with this power tool.
Failure to follow the
warnings and instructions may result in electric shock, re and/or serious
injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of ammable liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power
tools.
Unmodied plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a
power tool will increase the risk of electric shock.
d)
Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable
for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of
electric shock.
MODEL No.: PBS101.A, PRODUCT No.: 704518
5
f) If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply.
Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or medication.
A moment of
inattention while operating power tools may result in serious personal
injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch is in the o-position
before connecting to power source and/or battery pack, picking up or
carrying the tool.
Carrying power tools with your nger on the switch or
energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool
on.
A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This
enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use
of these devices can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools allow you to
become complacent and ignore tool safety principles.
A careless action
can cause severe injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your
application.
The correct power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and o.
Any
1010W Belt Sander
AFTER SALES SUPPORT
(toll free)
AFTER SALES SUPPORT
(toll free)
1010W Belt Sander
1300 889 028
MODEL No.: PBS101.A • 02/2021 • 704518 MODEL No.: PBS101.A • 02/2021 • 704518
MODEL No.: PBS101.A, PRODUCT No.: 704518 6
power tool that cannot be controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may aect the
power tool’s operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed.
Use of the power tool for operations dierent from
those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and
grease.
Slippery handles and grasping surfaces do not allow for safe
handling and control of the tool in unexpected situations.
5) Service
a) Have your power tool serviced by a qualied repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
6) Recommendation
Recommendation that the tool always be used via a residual current de-
vice having a rated residual current of 30 mA or less.
Safety Warnings for belt sander
a) Hold the power tool by insulated gripping surfaces, because the
sanding surface may contact its own cord.
Cutting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an
electric shock.
7
1010W Belt Sander
AFTER SALES SUPPORT
(toll free)
AFTER SALES SUPPORT
(toll free)
1010W Belt Sander
1300 889 028
MODEL No.: PBS101.A • 02/2021 • 704518 MODEL No.: PBS101.A • 02/2021 • 704518
Parts List
1. Auxiliary handle
2. Variable speed control dial
3. Lock-on button
4. On/o trigger
5. Hand grip
6. Dust extraction outlet
7. Belt cover
8. Belt adjustment control knob
9. Auxiliary handle locking lever
10. Sanding belt lever
11. Sanding belt
12. Dust collection bag
13. Front plate
14. Carbon brush access
1
8
13
2
11
345
7
9
10
6
12
14
Altri manuali per FERREX 704518
2
Questo manuale è adatto per i seguenti modelli
2
Indice
