Aleis ISO-9060 Manuale utente

ISO-9060 DATA

BOX

Version 1.01 14/05/2010

IMPORTANT! This User Guide must be read

i co ju ctio with Reader, prior to use.

Copyright Aleis Pty Ltd 2010

A1064AUS

Aleis Pty Ltd

PO BOX 63

Jandowae 4410

QLD Australia

ACN 130 754 826

www.aleis.com

Aleis ISO9060 Data Box Operational Manual

Aleis ISO9060 Series

Page 2 of 28

Aleis ISO9060 Data Box Operational Manual

Aleis ISO9060 Series

Page 3 of 28

9060 Reader I structio s

Regularity Notices a d Co formity ................................................................................................................................. 4

Importa t User I structio s ............................................................................................................................................ 5

1.0 The Qwerty Keypad ................................................................................................................................................. 6

2.0

9060 Series Reader Methods of Use ...................................................................................................................... 7

2.1

Record RFID o’s only (no data entry) .............................................................................................................. 7

2.2

Quick Data Entry – One only use of Template ................................................................................................... 7

2.3 Templates ........................................................................................................................................................... 9

2.4 Data Entry using Function Keys for a pre made Template ............................................................................... 12

2.5 How to: Upload RFIDs into the Reader ............................................................................................................ 13

2.6 How to: Compare RFIDs in the Reader ............................................................................................................ 14

2.7 Formatting the File System ............................................................................................................................... 15

2.8 How to Format your reader ............................................................................................................................... 15

3.0

ISO 9060 Series Me u Tree ................................................................................................................................ 16

3.1 Session Menu .................................................................................................................................................... 16

3.2 Read Setup Menu .............................................................................................................................................. 17

3.3 System Setup Menu .......................................................................................................................................... 18

3.4 Reader Information Menu ................................................................................................................................. 19

3.5 Memory Status Menu ....................................................................................................................................... 19

4.0

Audio a d Visual alerts ....................................................................................................................................... 20

5.0 Me u ........................................................................................................................................................................... 21

5.1 Sesssion ............................................................................................................................................................ 21

5.11

ew ................................................................................................................................................................ 21

5.12

Data Entry Setup .............................................................................................................................................. 21

5.13

Data Entry Locking ......................................................................................................................................... 21

5.14

Templates ........................................................................................................................................................ 21

5.15

Send to PC ....................................................................................................................................................... 21

5.16

Clear ................................................................................................................................................................ 21

5.17

Change ame .................................................................................................................................................. 21

5.18

Select ............................................................................................................................................................... 21

5.2 Read Setup ........................................................................................................................................................ 21

5.21

Load/Save Profile ............................................................................................................................................ 21

5.22

Comparison ..................................................................................................................................................... 21

5.23

Alert ................................................................................................................................................................. 21

5.24

Storage ............................................................................................................................................................. 22

5.25

Send ................................................................................................................................................................. 22

5.3 System Setup .................................................................................................................................................... 22

5.31

Communications .............................................................................................................................................. 22

5.32

Display............................................................................................................................................................. 23

5.33

Buzzer .............................................................................................................................................................. 23

5.34

Sleep Timer ..................................................................................................................................................... 23

5.35

Read Timer ...................................................................................................................................................... 23

5.36

Load Defaults .................................................................................................................................................. 23

5.37

Set Date/Time .................................................................................................................................................. 23

5.38

RFM Settings ................................................................................................................................................... 23

5.4 Reader Information ........................................................................................................................................... 24

5.5 Memory Status .................................................................................................................................................. 24

6.0

The Clock .............................................................................................................................................................. 25

7.0

Usi g Bluetooth .................................................................................................................................................... 25

7.1

BlueTooth PI code .......................................................................................................................................... 25

8.0

Aleis Co ditio s of Sale ....................................................................................................................................... 26

Aleis ISO9060 Data Box Operational Manual

Aleis ISO9060 Series

Page 4 of 28

Regularity Notices a d Co formity

USA – FCC

I formatio to the user (FCC Part 15.105)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encourage to try to correct the interference by one

or more of the following measures:

 Reorient or relocate the receiving antenna

 Increase the separation between the equipment and receiver

 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

 Consult the dealer or an experienced radio/TV technician for help

Modificatio war i g (FCC Part 15.21)

Warning: Any changes or modifications not expressively approved by Aleis could void the user's authority to

operate this equipment.

Ca ada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme MB-003 du Canada.

Europe CE

This device has been tested and meets the Electromagnetic Compatibility requirements for E 300 330

Australia a d New Zeala d - C-Tick

This device has been tested and meets the Electromagnetic Compatibility requirements for CISPR 11

Aleis ISO9060 Data Box Operational Manual

Aleis ISO9060 Series

Page 5 of 28

Importa t User I structio s

IMPORTANT:

Must be read prior to using system

The following instructions must be adhered to or permanent damage to the antenna/reader and/or permanent data loss

can occur. on-conformance to the handling and operating instructions will immediately void all warranties for the

antenna/reader and software.

1. WAR I G: All Aleis Warranties will be immediately voided if this reader is used in any way with

HyperTerminal

2. Up to 1,000 sessions, with maximum of 4,000 RFID numbers per session or 40,000 total records.

Data must be cleared at 40,000 total records, or 1000 sessions whatever comes first

3. Aleis suggests a form of transient protection unit be used while charging the reader to help prevent

power surges/spikes

4. Do not hose or submerge reader in water.

5. Use only a very lightly damp cloth to clean reader.

6. Do not use chemicals to clean reader.

7. Do not drop reader boxes as electronics are contained within.

8. All boxes with seals are to be kept sealed.

9. Do not remove any VOID stickers from readers.

10. Do not have metal objects between reader and RF Link as it will affect range and data may not be

transferred and may be lost.

11. Aleis Conditions of Sale apply at back of User Guide.

Aleis ISO9060 Data Box Operational Manual

Aleis ISO9060 Series

Page 6 of 28

1.0 The Qwerty Keypad

Data Entry Keys

Function Keys

Directional Keys

Menu Keys

Aleis ISO9060 Data Box Operational Manual

Aleis ISO9060 Series

Page 7 of 28

2.0 9060 Series Reader Methods of Use

There are four general methods of reading and recording data. Please read each method and follow

instructions covering the method you choose with your 9060 series system.

2.1 Record RFID No’s o ly ( o data e try)

1. Turn Reader ON.

(If a previous session is still on screen press F3, go to step 4 below and start a new

session)

2. Read animal.

3. When finished reading, press F3 and turn reader OFF. Data can be download later at PC,

or, start a new session, and read another group of animals.

Start a ew sessio :

1. To start a new session and read another group of animals, press MENU.

2. Select Sessio press OK.

3. New will be highlighted, press OK.

4. To read next group of cattle same as last group of cattle, press dow arrow and select

Bla k..

5. Press OK. (Note: A blank data entry box will appear go to step 9)

6. Press C (located to the left of the MENU button) to return to main reading screen.

7. Proceed to read next group of cattle.

2.2 Quick Data E try – O e o ly use of Template

Use this method when adding data to RFID’s and not saving template etc. Example: For

recording particular data on a rare occasion.

1. Turn Reader ON.

2. Press MENU.

3. Sessio will be highlighted, press OK.

4. New will be highlighted, press OK.

5. Press dow arrow once to highlight the word Bla k.

6. Press OK.

Aleis ISO9060 Data Box Operational Manual

Aleis ISO9060 Series

Page 8 of 28

7. A table heading will appear.

Field Default Data

When setting up template there is no need to have a date field as this will record

automatically and print with the report. There are our data fields available per

template.

8. Field column allows for three letters/numbers only for each field.

If recording information for a, tag number, pregnancy result, weight, vaccination, dose

rate or paddock. Abbreviate name to three letters only:

Once name is typed, press dow arrow and type in name for next field.

Field Default Data

TAG

WGT

P/E

PAD

9. Press right arrow to move into second column under Default Data. Default Data is any

data that will be the same for every animal read, leave box empty where data is to be

changed for each animal. – use up arrow and dow arrow buttons to move in the

column. See the example below. Note: Make sure down arrow button is pressed after

typing is finished in each line including the last line.

Field Default Data

TAG

WGT

P/E

PAD River

10. When finished, press C (located to left of MENU button) to return to session screen.

11. Read first RFID device, press F4.

12. Type in data required – when finished typing first line of data, press OK to move to next

line to enter next data. Note: if data has been entered the same for every animal, it can

still be edited if required on particular line, press Delete or backspace arrow and

remove what’s not required and type data required.

13. Press OK on last field, it will automatically return to main reading screen.

14. Quick guide to using Data E try Scree when reading cattle:

Field Default Data

Tag Type in Tag Number, press OK.

Vac 5 in 1 - Default Data, press OK.

Dos Type in Dosage, press OK.

Pad River - Default Data, press OK.

Press OK on last field, it will automatically return to main reading screen to read next

RFID.

15. When finished reading and recording data press F3, turn Reader OFF and download it

later at PC, or start a new session and read another group of animals.

Start a ew sessio :

16. To start a new session to read another group of animals, press MENU.

Aleis ISO9060 Data Box Operational Manual

Aleis ISO9060 Series

Page 9 of 28

17. Session will be highlighted, press OK.

18. New will be highlighted, press OK.

Follow same instructions from beginning.

If same fields are required, select Same Fields instead of Bla k (as in step 5)

2.3 Templates

 Setup ew Template

 Lock Template

 Save Template

 Change Template

 Remove Template

Setup New Template

1. Press MENU.

2. Sessio is highlighted – press OK.

3. Press dow arrow once to Data E try Setup.

4. Press OK.

5. A table heading will appear.

Field Default Data

When setting up template there is no need to have a date field as this will record

automatically and print with the report.There are ive templates available and our

fields available per template.

6. Field column allows for three letters/numbers only for each field.

If recording information for a tag number, pregnancy result, weight, vaccination, dose

rate or paddock. Abbreviate name to three letters only:

Once name is typed, press dow arrow and type in name for next field.

Field Default Data

TAG

WGT

P/E

PAD

7. Press right arrow to move into second column under Default Data. Default Data is any

data that will be the same for every animal read, leave box empty where data is to be

changed for each animal – use up arrow and dow arrow buttons to move in the

column. See the example below. Note: Make sure down arrow button is pressed after

typing is finished in each line including the last line.

Aleis ISO9060 Data Box Operational Manual

Aleis ISO9060 Series

Page 10 of 28

Field Default Data

TAG

WGT

P/E

PAD River

8. When finished, press C (located to the left of MENU button) to return to the session

screen.

Lock Template

9. From Sessio press dow arrow to select Data E try Locki g.

10. Press OK.

11. By pressing OK in any box locks data to prevent it accidentally being changed when

typing data into reader. An X appears in box when locked.

Some Examples:

Field HDR DEF DATA

WGT X

TAG X X

P/E X

PAD X X X

Field T ames created in Data E try Setup.

HDR Locks HDR field so it cannot be accidentally changed when entering data.

(These should always be locked with an X.)

This sho

DEF If X is in box, locks default data created in Data E try Setup. (Default Data is

any data that will be the same for every animal read.)

DATA Locks data field. When F4 is pressed after reading cattle if this has been locked

the data cannot be changed. (This should only be locked with a X if default

data is to remain the same for each animal.)

12. Once fields and data are locked to your requirements, press C button to go back one

screen.

13. Template needs to be saved if it is to be used at another time.

Save Template

14. Press dow arrow until Templates is highlighted.

15. Press OK.

16. Save Template will be highlighted – press OK.

17. Press OK on first Empty word, or any of the five templates.

Indice

Altri manuali Aleis Lettore di schede

Aleis

Aleis ISO-FFW-6000 Manuale utente

Manuali Lettore di schede popolari di altre marche

Lindy

Lindy 43185 Manuale utente

Lindy

Lindy 43185 Manuale utente

ViziT

ViziT RD-4F Manuale utente

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manuale utente

AVID ID

AVID ID AVID1043 Manuale utente

Conrad

Conrad PCMCIA Manuale utente

Rosslare

Rosslare DR-6255 Manuale utente

Lindy

Lindy 51541 Manuale utente

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manuale utente

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manuale utente

ACS

ACS ACR122L Manuale utente

Secukey

Secukey S2-MF Manuale utente

Elecom

Elecom MR-SMC07 series Manuale utente

Alien

Alien ALR-9800 Manuale utente

ACS

ACS ACR310 Manuale utente

Datamars

Datamars R-IN1300 MID Manuale utente

Alarm Lock

Alarm Lock AL-PRE2 Manuale utente

xpr

xpr B100PROX-AH Guida utente