Aleratec 1:3 DVD/CD LightScribe Duplicator SA Manuale utente

QUICK START GUIDE

1:3 DVD/CD LightScribe

Duplicator SA™

Part No. 260174

www.aleratec.com

Welcome!

Congratulations on your purchase of an Aleratec 1:3 DVD/CD

LightScribe Duplicator SA, considered by industry experts to be one of

the nest DVD/CD Duplicators and LightScribe disc labelers available.

The entire Aleratec team is committed to providing you with courteous

service. Our knowledgeable staff will strive to make owning and

operating your new Aleratec 1:3 DVD/CD LightScribe Duplicator SA a

pleasant experience.

This Quick Start Guide will lead you step-by step through the basic

operation procedures of your 1:3 DVD/CD LightScribe Duplicator SA.

For more detailed information on conguring and applying your 1:3

DVD/CD LightScribe Duplicator SA, please refer to the “Help” tab in the

software included on the Installation CD.

We at Aleratec appreciate your selection of our product, and wish you

great success and enjoyment of your new 1:3 DVD/CD LightScribe

Duplicator SA.

www.aleratec.com 1

Included Items

•1:3 DVD/CD LightScribe Duplicator SA

•Power Cord

•USB 2.0 Cable

•Quick Start Guide (this document)

•Installation CD

•Nero Software

•2 Hard Drive Tray Keys

•Aleratec Registration Card

Product Features

The Aleratec 1:3 DVD/CD LightScribe Duplicator SA is a stand alone

LightScribe disc publishing system with the capability of simultaneously

producing up to three DVD/CD copies or clearly labeled discs, and no

computer is required.

•Removable Hard Disk Drive to store disc images and label les.

•Aleratec only USB fast key instantly connects Hard Drive to a PC.

•BD/DVD-ROM drive for fast on the y copies.

•Laser burns disc labels.

•Powerful Aleratec Disc Publishing Suite, DVD/CD Disc Creation and

LightScribe Labeling Software included.

www.aleratec.com

Key Items on the

1:3 DVD/CD LightScribe Duplicator SA

Note: Choose a Good Location

1. Allow adequate clearance for moving parts.

2. Do not place near heat sources such as radiators or air

ducts, or in a place subject to direct sunlight, excessive dust,

mechanical vibration or shock.

3. Good care will help assure maximum product life. Improper

operating environment and misuse may void the warranty.

Control Panel

Removable

Hard Disc Drive

(see page 4)

DVD ROM Drive

DVD RW

LightScribe Drives

Warning: This product has

a manually switchable power

supply. Make sure that the

power supply is set to the

proper voltage for your region.

www.aleratec.com 3

Introduction

LCD Front Panel

(View may vary from picture)

1. Display shows all functions and messages.

2. ESC button is used to cancel a selected function.

3. ENT button is used to execute a selected function.

4. COPY button will start the “Autocopy” menu function.

5. USB button will take you directly to the USB On/Off mode option.

6. PRINT button will take you directly to the print menu.

7. SOURCE button will allow you to change the source drive that the duplicator

uses for loading master discs. The default for this option is the DVD-ROM drive.

8. UP arrow is used to scroll up through functions or menus.

9. DOWN arrow is used to scroll down through functions or menus.

ESC



Initialize Duplicator

1-3 ver: 0.96F

ENT

COPY USB SOURCEPRINT

4 5 6 7

www.aleratec.com

Removable hard Disk Drive (HDD)

Your LightScribe Duplicator SA is equipped with a removable hard disk drive

(HDD) for storing images of frequently copied discs. Storing an image of a disc you

want to copy on an HDD improves duplication speed, and adds the convenience of

not having to look around for the actual source disc you want to copy.

Your removable HDD provides extra security, in that you can remove the drive

containing the disc images and put it in a safe place where no un-authorized users

can copy or view the data.

The removable HDD includes a keyed lock to protect the data on the drive from

being misused or stolen. The HDD is used in the copy process as described in the

user guide.

Note: The HDD will not work unless it is secured in position with the

carriage lever and locked with the key. Do not unlock the HDD during

operation, as you will destroy any copies you are making.

Removable Hard Disk

Drive

Key in Lock

Carriage Lever

www.aleratec.com 5

Unpacking the Unit

Your system was shipped in one box and contains the 1:3 DVD/CD LightScribe

Duplicator SA and cables.

Carefully open the box and remove the top protective foam padding. Remove the

following:

• 1:3 DVD/CD LightScribe Duplicator SA

• 1 Power Cord

• 1 USB 2.0 Cable

• 1 Quick Start Guide

• 1 Nero Software CD

• 2 Hard Drive Tray Keys

• 1 Installation CD

Note: It is important to keep the original shipping container and

packaging. In the event you misplace your packaging and need

to ship the 1:3 DVD/CD LightScribe Duplicator SA, you should first

contact technical support to purchase a new shipping container.

Shipping the 1:3 DVD/CD LightScribe Duplicator SA without proper

packaging will void your warranty.

Connect the Cables and Apply Power

Plug the power cord into the power supplys of the 1:3 DVD/CD LightScribe

Duplicator SA, also located on the rear side (make sure the red switch is set at 115

VAC). Plug into a standard 115 VAC outlet.

Plug the USB 2.0 Cable into the USB connector located on the center rear of the 1:3

DVD/CD LightScribe Duplicator SA. Connect the other end of the USB cable into

an available USB 2.0 port on your PC.

Note: Use only with a USB 2.0 port. This system cannot be used with

USB 1.1, as this will greatly affect system performance. If windows

displays a message that a fast USB device is detected on a slow USB

port, then you will need to upgrade your computer by adding a USB 2.0

port.

www.aleratec.com

LightScribe Software Installation

Minimum System Requirements: PC running Windows 2000, XP, or Vista

1. Install the Aleratec File System Manager. First write down the key code

labeled “Product Key” on the front of the disc and then put the disc into your

PC. If Autorun does not begin, go to “My Computer” and explore the CD and

double-click “Setup” to begin the installer manually. Follow the prompts and

insert the key code that you wrote down where “Serial Number” is displayed

and restart your PC when the installer has nished. This manager allows

Windows to recognize the hard drive on the 1:3 duplicator.

Note: Your 1:3 LightScribe Duplicator SA should already have the

Hard Disc Drive (HDD) properly formatted. If it is not, while the

duplicator is not in USB mode, go to the Hard Drive Setup menu

option 11 and press ENT, and in the sub-menu choose 7. Format

Hard Drive and press ENT. Do not use Windows to format the hard

drive. This will result in the 1:3 LightScribe Duplicator SA being

unable to recognize the HDD.

2. Install the LightScribe Software. Follow the prompts and complete the

installation procedure. There will be two programs that will be installed.

a. LightScribe System Software

b. LightScribe Template Labeler

In order to correctly burn LightScribe labels using your Aleratec

LightScribe Duplicator SA you rst must correctly congure the

LightScribe Template Labeler Software.

During the LightScribe Template Labeler Setup you will be presented with

a list of Supported LightScribe Drives and a list of Your Selected Drives.

www.aleratec.com 7

Click Install to complete the installation.

3. Connect the 1:3 to your PC with the USB cable.

4. Make sure the 1:3 is in USB mode. Press the “USB” fastkey on the control

panel on the front of the 1:3. If the screensaver is on you may have to press the

button twice.

5. You will see the LCD screen display the “USB Connection” menu. Below this

title you will see an “On” or “Off” listed. This is the current status of the USB

connection. To change the current status, use either the Up or Down arrow keys

to select the mode you want. Then, press the ENT key to conrm the selection.

You will be prompted to restart the system. For this guide make sure that the

USB mode is enabled.

Note: While in USB mode, the duplicator cannot access the hard

drive only the PC can.

www.aleratec.com

6. After the 1:3 LightScribe Duplicator SA has rebooted, go to “My Computer”

in Windows and look to see if the HDD is there. It will be labeled as

“Duplicator”.

7. If you open the drive location you will see three or four folders.

a. The “dup” folder is where “.iso” les can be put in for disc burning.

b. The “label” folder is where “.lsi” les created by the LightScribe Template

Labeler program will be placed.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Aleratec Duplicatore di dischi

Aleratec

Aleratec 280110 Manuale utente

Aleratec

Aleratec 280112 Manuale utente

Aleratec

Aleratec 1:5 HDD Cruiser 350104 Manuale utente

Aleratec

Aleratec DVD/CD Flash Copy Tower Manuale utente

Aleratec

Aleratec 1:7 DVD/CD Tower Publisher SL Manuale utente

Aleratec

Aleratec 260206 Manuale utente

Aleratec

Aleratec 330107 Manuale utente

Aleratec

Aleratec 350109 Manuale utente

Aleratec

Aleratec 260205 Manuale utente

Aleratec

Aleratec 1:3 DVD/CD Copy Tower Pro HS Manuale utente

Aleratec

Aleratec 330119 Manuale utente

Aleratec

Aleratec 260167 Manuale utente

Aleratec

Aleratec 260170 Manuale utente

Aleratec

Aleratec 260167 Manuale utente

Aleratec

Aleratec PortaCruiser 350108 Manuale utente

Aleratec

Aleratec 1:11 HDD Copy Cruiser IDE/SATA Manuale utente

Aleratec

Aleratec 260155 Manuale utente

Aleratec

Aleratec 350117 Manuale utente

Aleratec

Aleratec 330120 Manuale utente

Aleratec

Aleratec 350115 Manuale utente

Aleratec

Aleratec 1:5 HDD Copy Cruiser IDE/SATA 350112 Manuale utente

Aleratec

Aleratec 260180 Manuale utente

Aleratec

Aleratec 1:16 USB 3.0 Copy Tower 330110 Manuale utente

Aleratec

Aleratec 350135 Manuale utente

Manuali Duplicatore di dischi popolari di altre marche

Riso

Riso CV Series Manuale

MicroBoards Technology

MicroBoards Technology GX-2 Manuale utente

Addonics Technologies

Addonics Technologies HDUS325DX Manuale utente

Carry

Carry Pro118 Manuale utente

CopyPro

CopyPro PowerPro II Manuale utente

Primera

Primera Max Manuale utente

Logicube

Logicube EchoPlus-NG Manuale utente

Silca

Silca Delta 2000 SA Manuale utente

Reflex7

Reflex7 Daisy Chain Series Manuale utente

Vinpower Digital

Vinpower Digital SharkCopier DC Manuale utente

Codonics

Codonics Virtua E Manuale utente

Octave

Octave Copy Master II Manuale utente

Kanguru

Kanguru U2-DVDDUPE-S Manuale utente

StarTech.com

StarTech.com 8STSATDUP11 Manuale utente

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Manuale utente

Addonics Technologies

Addonics Technologies UDFH7 Manuale utente

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 Manuale utente

Addonics Technologies

Addonics Technologies CFASTD5 Manuale utente