Aleratec 330118 Manuale utente
®
QUICK START GUIDE
Aleratec
1:118 USB Copy Tower SA™
Part No. 330118
www.aleratec.com
Welcome!
Congratulations on your purchase of an Aleratec 1:118 USB Copy
Tower SA, considered by industry experts to be one of the nest USB
Duplicators available.
The entire Aleratec team is committed to providing you with courteous
service. Our knowledgeable staff will strive to make owning and
operating your new Aleratec 1:118 USB Copy Tower SA a pleasant
experience.
For more detailed information on conguring the 1:118 USB Copy
Tower SA and applying it’s various capabilities, please refer to the User
Guide on the CD included.
This Quick Start Guide will lead you step-by step through the basic
operation procedures of your 1:118 USB Copy Tower SA.
We at Aleratec appreciate your selection of our product, and wish you
great success and enjoyment of your new 1:118 USB Copy Tower SA.
Included Items
•1:118 USB Copy Tower SA
•Power Cord
•User Guide CD
•Quick Start Guide (this document)
•Aleratec Registration Card
www.aleratec.com 1
Controller and
Display Panel
Source USB Port
Target USB
Ports (118)
Power Switch
Product Features
Thank you for purchasing the 1:118 USB Copy Tower SA. Please read
this User Guide thoroughly before using this product.
The 1:118 USB
Copy Tower SA is a USB Duplicator.
•Stand Alone, no computer required.
•Copy, Compare, or Erase up to 118 drives simultaneously.
•Backlighted LCD Display shows function selected and job progress.
•Compatible with popular drive capacities and formats.
•Fast Synchronous and Asynchronous copying.
Key Items on the
1:118 USB Copy Tower SA
Note: Choose a Good Location
1. Allow adequate clearance for moving parts.
2. Do not place near heat sources such as radiators or air ducts, or in a
place subject to direct sunlight, excessive dust, mechanical vibration or
shock.
3. Good care will help assure maximum product life. Improper operating
environment and misuse may void the warranty.
Warning: This product
has a manually switchable
power supply. Make sure
that the power supply is
set to the proper voltage
for your region.
www.aleratec.com
2
Introduction
1:118 USB Copy Tower SA Display Panel and Buttons
(Actual display may vary from illustration)
1. LCD display shows all functions and messages
2. OK button is used to execute a selected function
3. ESC button is used to cancel a selected function, or exit a menu
4. UP arrow is used to scroll backward through functions or menus
5. DOWN arrow is used to scroll forward through functions or menus
Note: When the unit is powered on, the 1:118 USB Copy Tower SA
will preform a self-test sequence.
OK
USB Duplicator
1. Copy ESC
4
1
35
2
www.aleratec.com 3
Precautions
Before installing you 1:118 USB Copy Tower SA, please read the following.
Installation
Avoid placing the 1:118 USB Copy Tower SA in a location subject to:
• High humidity
• High temperature
• Excessive dust
• Mechanical vibration
• Direct sunlight
• Electromagnetic radiation
Transportation
Keep the original packing materials for future moving or shipping of the 1:118
USB Copy Tower SA.
www.aleratec.com
4
Overview
Main Menu
This section provides a listing of the functions of the 1:118 USB Copy Tower SA.
Detailed descriptions of each function are given in the next section. The functions
are numbered for easy reference; these numbers are also used in the next section.
USB Duplicator
1. Copy
OK
ESC
USB Duplicator
2. Compare
OK
ESC
USB Duplicator
3. Copy+Compare
OK
ESC
USB Duplicator
5. Information
OK
ESC
USB Duplicator
6. Utility
OK
ESC
USB Duplicator
7. Setup
OK
ESC
USB Duplicator
4. Capacity Check
OK
ESC
www.aleratec.com 5
Overview
Subfunctions of Main Menu Items 5, 6, and 7
The main menu “Information” function has 2 subfunctions. These are:
The main menu “Utility” function has 6 subfunctions. These are:
5.1 USB Info
5.2 System Info
USB Duplicator
5. Information
OK
ESC
6.1 Format FAT 16/32
6.2 Measure Speed
USB Duplicator
6. Utility
OK
ESC
6.3 Media Check
6.4 Quick Erase USB
6.5 Full Erase USB
6.6 System Update
www.aleratec.com
6
Overview
Subfunctions of Main Menu Items 5, 6, and 7 - continued
The main menu “Setup” function has 8 subfunctions. These are:
7.1 Start-up Menu
7.2 Copy Area
USB Duplicator
7. Setup
OK
ESC
7.3 Button Beep
7.4 Asyn Hold Time
7.5 Ignore Size
7.6 Asynchronous
Enable/Disable
7.7 Language
7.8 Working Mode
Normal/Turbo
www.aleratec.com 7
Using the USB Duplicator
Synchronous and Asynchronous
The 1:118 USB Copy Tower SA supports two copying methods:
• Synchronous Copying
• Asynchronous
Synchronous Copying
Synchronous Copying means that all ash drives begin copying together.
Synchronous Copying is used when the source data is larger than the system buffer
(120MB).
You can check the size of the data source drive by inserting the source drive into the
USB Duplicator and using the arrow keys to rst select “Information”, then select
“USB Info”.
Plug in one source and up to 118 target USB ash drives. The display will read out the
number of USB ash drives that are ready for copying and the content size. When you
have nished loading the target drives use the arrow keys to select “Copy” and then
select OK.
Asynchronous Copying
Asynchronous Copying is used when the data les are the same as or less than the
systems buffer memory (120MB). If the source data content is less than the systems
buffer memory you can copy ash drives continuously by taking out the drive which has
nished copying, and replacing it with another blank. Asynchronous Copying will start
immediately after loading the rst target drive.
When this process is used the source data is read into systems buffer rst. You can
check the size of the data source USB ash drive by inserting it into the USB Duplicator
and using the arrow keys to rst select “Information”, then select “USB Info”.
www.aleratec.com
8
Using the USB Duplicator
Main Menu
Functions are selected with the arrow keys. The numbers correspond to the Function
listing in the previous section.
1. Copy
This function makes USB ash copies. The duplicator auto detects and supports
Synchronous, and Asynchronous methods of Copy.
Synchronous Copying
In Synchronous Copying all USB ash drives are copied simultaneously.
Synchronous Copying is used when the source data is larger than the system buffer
(120MB).
1. Load the source ash drive into the USB Duplicator. Use the UP or DOWN
arrow to scroll through the menu until Copy is displayed on the LCD screen.
2. Press the OK button on the display panel. The LCD will display the following
status:
Note: The number beside “USB” is the capacity of the USB flash
drive in megabytes. The number to the right is the size occupied by
files or images.
3. Load the blank target ash drives into the USB Duplicator. The LCD will
display the number of blank media loaded and ready for copying.
USB Duplicator
1. Copy
OK
ESC
USB(963M) 450M
0 ready
OK
ESC
USB(963M) 450M
3 ready
OK
ESC
Altri manuali per 330118
1
Indice