ALFAtron ALF-IP6 Manuale utente

www.alfatronelectronics.com

ALFATRON ELECTRONICS GmbH GERMANY

ALF-IP6

Wallplate Control Panel- 6 buttons

Version: ALF-IP6_2021V1.1

ALF-IP6

Preface

Read this user manual carefully before using the product. Pictures are shown in this

manual for reference only, different models and specifications are subject to real

product.

This manual is only for operation instruction, please contact the local distributor for

maintenance assistance. The functions described in this version were updated January

2018. In the constant effort to improve the product, we reserve the right to make

functions or parameters changes without notice or obligation. Please refer to the dealers

for the latest details.

FCC Statement

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. It has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a commercial

installation.

Operation of this equipment in a residential area is likely to cause interference, in which

case the user at their own expense will be required to take whatever measures may be

necessary to correct the interference.

Any changes or modifications not expressly approved by the manufacture would void

the user’s authority to operate the equipment.

ALF-IP6

SAFETY PRECAUTIONS

To ensure the best from this product, please read all instructions carefully before using

the device. Save this manual for further reference.

Unpack the equipment carefully and save the original box and packing material for

possible future shipment.

Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury

to persons.

Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

Using supplies or parts not meeting the products’ specifications may cause damage,

deterioration, or malfunction.

Refer all servicing to qualified service personnel.

To prevent fire or shock hazard, do not expose the unit to rain, moisture or install

this product near water.

Do not put any heavy items on the extension cable in case of extrusion.

Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

Install the device in a place with fine ventilation to avoid damage caused by

overheat.

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage.

If an object or liquid falls or spills onto the housing, unplug the module immediately.

Do not twist or forcefully pull the ends of the optical cable. It can cause malfunction.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

Unplug the power cord when left unused for a long period of time.

Information on disposal for scrapped devices: do not burn or mix with general

household waste, please treat as normal electrical waste.

ALF-IP6

Contents

1. Introduction .................................................................................................................1

1.1 Introduction to ALF-IP6 ......................................................................................1

1.2 Features ............................................................................................................1

1.3 Package List ......................................................................................................1

2. Panel Description........................................................................................................1

3. System Connection.....................................................................................................3

4. Control Panel Software...............................................................................................4

4.1 Basic Setting......................................................................................................4

4.2 Panel Set ...........................................................................................................7

4.3 Action List ..........................................................................................................8

4.4 Event setting......................................................................................................9

4.4.1 RS232 Setting .........................................................................................9

4.4.2 IR Setting...............................................................................................11

4.4.3 TCP/IP Setting.......................................................................................14

4.4.4 Delay setting..........................................................................................15

4.4.5 Compare Setting....................................................................................16

4.4.6 LED setting ............................................................................................17

4.4.7 Toggle Setting........................................................................................18

4.5 Event List.........................................................................................................20

5. Specification .............................................................................................................21

6. Panel Drawing ..........................................................................................................22

7. Troubleshooting & Maintenance ...............................................................................23

8. After-Sales…………………………………………………………………………………..24

9. Warranty…………………………………………………………………………………….25

ALF-IP6

1. Introduction

1.1 Introduction to ALF-IP6

The Alfatron ALF-IP6 Wallplate Control Panel has three built-in programmable RS232

connectors and two Infrared (IR) connectors.

The Programmable Control Panel can fully control the compatible switches, as well as

third-party devices such as a matrix switcher, compact scaler switcher, projectors,

screens, etc. Use the device for presentations in showrooms, classrooms, and

boardrooms.

1.2 Features

Each button can be programmed to send bi-direction RS232 commands

simultaneously to control third party devices.

Each button can be programmed to send the IR codes simultaneously to control the

third-party devices and support IR code learning function.

The unit may be programmed through the Ethernet port, via the Control Software.

Crystal and backlit buttons with easy user-friendly customizable changeable labels.

The backlit brightness is controllable.

Dimension: 70mm long and 41mm wide.

1.3 Package List



1 x ALF-IP6



2 x Screw (M4*35)



1 x Power adapter (12VDC 1A)



3 x 2-Pin Pluggable terminal blocks



1 x 3-Pin Pluggable terminal block



1 x 5-Pin Pluggable terminal block



1 x Button label



6 x Button caps



1 x User Manual

Note: Please confirm if the product and the accessories are all included, if not, please

contact your local agent.

ALF-IP6

2. Panel Description

No.

Name

Description

Power LED

Illuminates red when powered on.

2 Button

Six crystal and luminescent programmable buttons:

Each button can be programed with the Control Panel

Software.

Each label within a button can be easily changed.

Simply select the label you need and change it as

shown below:

ALF-IP6

3 ETHERNET

RJ45 connector. Connects with a PC to run the Control

Panel Software to customize button control. After setting

button functions, the port can be connected to a

third-party device to control it via buttons.

4 IR Sensor

Receives and learns the IR code to build the IR

database.

5 RS232(1) ~

RS232(3)

Total of three RS232 ports. Connect to third-party

devices which need to be controlled via the Control

Panel Software.

6 PWR (12V)

Connects with 12V DC power adaptor.

7 IR (1) ~ IR (2) Two IR output ports. Connects with IR Emitter to control

other devices via the Control Panel Software.

FIRMWARE

Micro USB port for firmware updating.

9 RESET

Long-press this button for three (3) seconds until the

power LED goes out to restore factory default. When the

LED lights up, the reset is successful.

ALF-IP6

3. System Connection

The ALF-IP6 can activate different ports at the same time. This means every button can

send RS232 commands, IP and IR codes at the same time.

The system diagram as below:

TX RX

RS232(3) IR(1) IR(2)

TX RX 12V

PWR

TX RX

ETH ER NE T

IR Remote

IR Emitter

IR:

TCP/IP:

RS232 :

Wireless Route

System Diagram

1) Connect the ALF-IP6 to the LAN port of a Wireless Router or control device (PC) to

the ETHERNET port.

2) Connect the third-party device (Matrix Switchers, Compact Scaler Switchers, or a

Projector) that need to be controlled to the RS232 (1) ~ RS232 (3) ports.

3) Connect the IR Emitters to IR (1) ~ IR (2) ports.

ALF-IP6

4. Control Panel Software

4.1 Basic Setting

You can use Control Panel Software to easily set functions for each button.

1) Connect the control PC to the ETHERNET port.

2) The default IP of the ALF-IP6 wallplate is 192.168.0.178 (modifiable); the control

PC should have its network segment the same as the ALF-IP6’s.

Modify the IP of the PC

3) Install / uninstall Control Panel Software:

Install: Copy the software file to the computer connected with ALF-IP6

Uninstall: Delete all the software files in corresponding file path.

Same network

segment as the

switcher

ALF-IP6

4) Double-click the below software icon to run this software:

The main window of the Control Panel Software has five parts:

Panel Set, TCP/IP, Action List, Event Set and Event List.

The main window of the Control Panel Software is shown as below:

Panel Set: Click “1~6”

to set key action

Show IP addresses of

all connected devices

in LAN.

Show all key actions, and

any action can be

selected for setting

events.

Set events for the selected action.

Show all events.

Indice

Altri manuali ALFAtron Pannello di controllo

ALFAtron

ALFAtron ALF-WP8-B Manuale utente

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche