ALLEN LEIGH PR-16 Manuale utente

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug.

A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong is provided for your safety.

When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11) Only use the attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in

any way, such as power supply

cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

15) This equipment is indoor use and all the communication wirings are limited to inside of the building.

16) The socket-outlet shall be installed near the equipment and shall be easily accessible.

17) CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

# Operation Max temperature : 40℃

# USB Load condition: USB Ports( 5 Vdc, Max. 500 mA)

● Installation should be carried out only by qualified personnel and in accordance with any electrical regulations in force

at the time.

● The DVR must be placed on a stable surface or mounted in an approved cabinet.

Adequate ventilation must be provided, taking particular care not to block any of the air vents on the DVR.

● Adequate protection against lightning strikes and power surges must be installed to prevent damage to the DVR.

● Any safety warnings on the DVR and in these instructions must be adhered to.

● If cleaning is necessary, shutdown the DVR and disconnect power first.

Use a soft dry cloth only never use any abrasive cleaners.

● Do not attempt to service or repair the DVR as opening or removing covers may expose dangerous voltages or other

hazards.

Refer all servicing to qualified service personnel.

MOUSE CONTROL

Designed to be controlled and easy to use with a mouse.

ENHANCED GRAPHICAL USER INTERFACE [GUI]

The DVR menu structure and on screen display is presented in a simple to use and logical GUI format.

GENUINE PENTAPLEX OPERATION

The DVR will continue to record at full frame rate during local playback, local setup, multi user remote viewing and

playback and remote setup.

AUDIO

4 audio inputs are supported which can be assigned to any video channel. Live and recorded audio can be monitored

remotely over the internet and remote ‘talkback’ audio transmission to the DVR is also possible.

BACKUP

Recorded footage (including audio) can be archived to USB memory stick or CD/DVD.

Playback software is embedded with the backup files and the backup also contains the system event log and backup log

for full traceability.

REMOTE CONNECTION

Depending on the user level, full DVR control is available over the internet as well as the ability to remotely configure the

DVR. Alarm outputs on the DVR can be remotely triggered over the internet.

COMPREHENSIVE RECORDING SETUP

Recording can be scheduled, alarm or motion activated. For each type of recording, frame rates, image quality and audio

recording properties can be adjusted per hour, day and for each individual channel.

The DVR also has a panic recording feature (from the front panel or external input) which overrides all other recording

settings to provide the best quality recording in the event of an emergency.

PTZ CONTROL

Full PTZ control is available from the front panel or remote connection and a wide number of speed dome protocols are

supported. Protocols can be set individually for each channel and PTZ speed can be adjusted to suit particular speed

domes.

TELEMETRY CONTROL

Full telemetry control is available from the front panel or remote connection and a wide number of speed dome protocols

are supported. Protocols can be set individually for each channel and telemetry speed can be adjusted to suit particular

speed domes.

EXTENSIVE MONITOR SUPPORT

The DVR has 2 main monitor outputs (Composite and DVI).

One spot monitor output can be programmed in the DVR setup.

LIVE DISPLAY

The DVR displays single or multi screen images and also has several sequence modes (standard and user definable).

CONFIGURATION BACKUP

All configuration settings on the DVR can be saved to USB memory stick or a PC file remotely.

The saved data can then be uploaded to other DVR units allowing rapid deployment where more than

one DVR is being installed.

EMAIL SUPPORT

The DVR can send emails to specific users to notify events such as alarm, motion detection,

hard drive failure, & etc.

1. Front panel description.

KEY

DESCRIPTION

Function Key

POWER Turn On/Off the system power

DISPLAY Selects various display modes in live display and playback

PTZ Selects PTZ mode in live display

SETUP Displays the setup menus

SEARCH Displays the search menu

Control Key

CHANNEL SELECTION

BUTTONS

Used to display individual channels in live display and playback

Also used to enter numeric passwords for the various login screens

CURSOR KEYS Allow to Navigate on the menu

ENTER Apply or Select an item

RETURN Cancel or go to Previous menu

Playback Control

Shuttle Wheel

Used to quickly adjust playback speed and direction.

Also used to control camera zoom when in PTZ mode ,

and digital zoom level in live display

JOG When playback is paused, used to move footage forwards or backwards, frame

by frame

HOLD Locks the current function of the SHUTTLE WHEEL so it can be released

◀◀

Increases reverse playback speed

◀

Selects reverse playback

ΙΙ Pauses / resumes playback

▶

Selects forward playback and also accesses the instant playback feature

▶▶

Increases forward playback speed

2. Rear panel description.

A. CAMERA INPUT : Connect up to 16 camera inputs.

B. MONITOR : Main BNC monitor.

SPOT OUT : BNC Spot monitor.

C. AUDIO INPUTS & OUTPUTS :

Up to 4 audio inputs and one audio output can be connected as necessary.

D. PAL / NTSC :

Change Camera input type.

E. ALARM INPUTS :

Up to 4 alarm inputs can be connected and configured as high or low inputs

with common ground.

RELAYOUTPUT :

1 alarm outputs can be connected and configured as high or low outputs with common ground.

RS485 : Connect PTZ camera.

F. LAN : LAN connection to a router or internal network.

G. DVI : DVI main monitor connection to a PC monitor or plasma screen.

If user want to connect VGA, please use DVI to VGA converter.

H. POWER : Connect 12V / 5A adaptor.

–

3. Remote Controller description.

POWER

System

ON/OFF

SETUP : Open System Setup Menu

RETURN

Cancel /

Deselect

Previous Screen

Channel Selection Buttons

※If there are many DVRs on stack, each DVR must be set with different ID, the remote controller sets

each ID per DVR, then all DVRs can be controlled with one remote controller by each ID.

How to set ID on the remote controller

: Press the ID button then displayed INPUT ID statement.

Press the set ID and Press the RETURN button (The default ID is 01).

For returning to the original situation, press the ID button again.

And Input the 255 and press the RETURN button of remote controller.

Navigation Buttons

: Used for Playback Control,

Menu Navigation, and PTZ/Focus Control

ID Button

Select DVR ID

ENTER : Apply / Select /Go to Next Screen

AUDIO : Not Supported

DISP : Change display screen.

SEARCH : Go to Search mode.

PTZ : Go to PTZ menu.

PANIC : Record by Panic setting.

KEYLOCK : Lock the keys (Remote / Front)

SEQUENCE : Change to Sequence screen.

ZOOM : Go to Zoom mode.

ARCHIVE : Go to backup menu.

• Connect up to 16 CAMERA INPUTS as necessary.

• Connect monitors to the DVR using the COMPOSITE or DVI connections

• Connect power to the DVR. The DVR checks for proper power connection and emits two beeps.

Press the POWER BUTTON on the front panel of the DVR to begin operation.

The DVR startup screen detects and checks the status

of hard drives and the CDRW / DVD-RW drive.

After startup diagnostics are complete, the operator must logon to the

system. The default user name is ‘ADMIN’.

Using the CHANNEL SELECTION buttons, key in

the default password of ‘1234’ and press the ENTER button.

The DVR begins normal operation and shows the default display

of all 16 channels.

The status bar(Include menu control) at the bottom of the screen

shows menu first time. After that, it will show the current time and

date.

A title for each channel is shown.

The red square and letter ‘T’ in the top right of each channel

display shows that the channel is recording in Timer / Schedule

mode.

Indice

Altri manuali ALLEN LEIGH Registratore digitale

ALLEN LEIGH

ALLEN LEIGH N6 Series Manuale utente

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente