Allen + Roth FP1285-PRP-48LFC-R Manuale utente

Français p.

allen + roth®is a registered trademark

ATTACH YOUR RECEIPT HERE

JOIGNEZ VOTRE REÇU ICI

ADJUNTE SU RECIBO AQUÍ

MODEL #FP1285-PRP-48LFC-R

Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. - 8

p.m., EST, Monday - Sunday. You may also contact us anytime at Lowes.com/allenandroth

ITEM #2592470

1 ft. x 4 ft. LED Flat Panel

Français p. 9

Español p. 17

Serial Number: Purchase Date:

VR20201

TABLE OF CONTENTS

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Mounting Plate 1

B Support wire hooks 2

CLED at panel 1

D Frame 1

PACKAGE CONTENTS............................................................................................................................................ 2

HARDWARE CONTENT ..........................................................................................................................................3

PREPARATION ........................................................................................................................................................3

SAFETY INFORMATION..........................................................................................................................................3

5 LIGHT SETTING SLIDE SWITCH......................................................................................................................... 4

ASSEMBLY INSTRUCTIONS ..................................................................................................................................4

CARE AND MAINTENANCE....................................................................................................................................8

TROUBLESHOOTING .............................................................................................................................................8

WARRANTY .............................................................................................................................................................8

REPLACEMENT PARTS LIST .................................................................................................................................8

HARDWARE CONTENT (shown actual size)

AA BB DD

CC EE

GG HH II

Cable tie

Qty. 2

Drywall Anchor

Qty. 4 Wire Nut

Qty. 3

Mounting Screw

Qty. 2

Plastic push-in

fastener

Qty. 1

Machine screw

Qty. 2 Machine screw

Qty. 2

Wood Screw

Qty. 4 Washer

Qty. 4

SAFETY INFORMATION

WARNING

CAUTION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

• Do not look directly at LEDs for extended periods of time.

• For INDOOR Damp Locations.

• For electrical requirements, see xture. Minimum 90°C supply conductors.

• NOTE: THIS FIXTURE IS DIMMABLE BY SPECIFIC FORWARD PHASE ELECTRONIC (TRIAC) DIMMERS. Dimmers tested to be compatible

with this xture are the Lutron: Skylark®SCL-153P*, Diva®DVCL-153P*, Maestro®MACL-153M*, Toggler®TGCL-153P*, Lumea®LECL-153P*,

Caseta®PD- 6WCL*, Eaton Halo®SAL06P*. (This list of dimmers does not imply any guarantee or warranty of compatibility with a particular

application. Dimmers not listed do not imply non-compatibility.)

Do not leave bare wires exposed.

Shut off power at the circuit breaker or fuse panel before removing the old xture or installing a new one.

Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

• If you are unsure if the electrical box is properly grounded, if the box is plastic and has no ground wire, or if you are unfamiliar with the methods of

properly grounding xture, consult a qualied electrician.

• NOTE: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation

between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that of the receiver. 4) Consult the dealer or

an experienced radio/TV technician for help.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any

part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 45 minutes

Tools Required for Assembly (not included): Ladder,Safety goggles,Phillips screwdriver,Power drill with 1/8 in. / 0.3 cm drill bits,Gloves

Helpful Tools (not included): toggle bolts

5 Light Setting Slide Switch

ASSEMBLY INSTRUCTIONS

Hardware Used

Slide switch that allows the color temperature of the

light to be adjusted between 5 values:

6500K, 5000K, 4000K, 3000K, 2700K

1. Remove mounting plate (A) from LED panel (C) by sliding into the

direction of the slots closest to the mounting screws (AA), and then

lifting up. Hold the mounting plate (A) up to the junction box in the

desired xture mounting orientation.

2. Pull black, white and ground supply wires from electrical box

through the hole in center of mounting plate (A). Ground wires can be

either green or bare copper. Attach mounting plate (A) to the electrical

box using mounting screws (AA) provided.

Mounting Screws Qty. 2

AA AA

3a. WOOD: Locate the open holes for mounting at the corners of the

mounting plate (A) and drill 1/8 in. pilot hole in the center. If a wooden

stud is encountered, use the wood screws (BB) and washers (CC)

provided to secure the mounting plate directly to stud.

3b. DRYWALL:If no stud is encountered, place the drywall anchors (DD)

in the pilot holes and screw them into place until ushed with surface

of drywall. Place washer (CC) over the mounting hole and drive long

screws (BB) into drywall anchor until snug. DO NOT OVERTIGHTEN.

NOTE: Main support for mounting plate (A) is electrical box when it is

secured properly. If the electrical box is not properly secured, alternative

mounting methods such as toggle bolts (not included) should be used

to secure mounting plate.

4. Hold LED Panel (C) up to secured mounting plate (A) and attach

the support wire hooks (B) from the backside of xture to the specially

designed slots in the mounting plate (A) to temporarily hold xture for

wiring.

Hardware Used

Wood Screw Qty. 4

Washers Qty. 4

Hardware Used

5. Fixture must be properly grounded. Connect xture ground wire

to ground wire in electrical box using a wire nut (EE). Ground wires

can be either green or bare copper. Connect black supply lead to black

xture wire and white supply lead to white xture wire using

wire nuts (EE). Secure the wire nuts properly to prevent the wires from

coming loose. Use cable ties (FF) to secure loose xture wires to one

another in the center of the mounting plate to keep them from getting

in the way during xture mounting. Push excess wire back into the

electrical box.

6. Keeping the support wire (B) hooks attached to the mounting plate

(A), lift up the LED panel (C), being careful not to scratch ceiling. Align

and insert the 2 metal tabs (on the same side of the mounting plate (A)

as the support wires) into the corresponding slots on the LED panel (C).

7. While keeping the rst 2 metal tabs inserted, pivot the panel (C) up

and insert the 2 remaining tabs on the opposite side.

Wire Nut Qty. 3

Cable tie Qty. 2

EE EE EE

Hot

Neutral

Ground

8. Slide panel (C) until tabs are locked into place. Note that the

direction will be either left or right, depending on panel (C) orientation.

Slowly release xture, making sure it stays in place. Slowly release

xture, making sure it stays in place. IMPORTANT: To lock the panel

on the side of the panel (C).

9. To assist with one person mounting of the frame (D) a temporary

assist screw (HH) is provided. Install the assist screw (HH) in one end

of the at panel (C). Bring the wood frame (D) up, align one end against

the ceiling in line with the at panel (C) and slide it so the mounting hole

in the frame (D) goes over the assist screw (HH)

10. Bring the other end of the frame (D) up to the ceiling and insert the

long machine screw (GG) through the hole in that end into the threaded

hole in the at panel (C). While supporting the frame (D), unscrew the

assist screw (HH) from the threaded hole and replace it with the other

long machine screw (GG).

Hardware Used

Assist Screw Qty. 1

Machine Screw Qty. 2

Plastic push-in fastener Qty. 1

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-866-994-4148, 8 a.m. - 8 p.m., EST, Monday - Sunday.

PART DESCRIPTION PART #

A ZH-FP1285-F48-PRP 1

CARE AND MAINTENANCE

TROUBLESHOOTING

WARRANTY

Periodically clean the xture and diffuser using a mild, non-abrasive cleaner and soft cloth. When cleaning the xture, make sure the power is

turned off. Do not spray cleaner directly onto any part of the xture or LEDs.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

Light does not come on. 1. Power/ light switch is off.

2. Fixture not properly wired to junction box.

3. Bad switch.

1. Verify power supply and light

switch are on.

2. Check wiring connections.

3. Test or replace switch.

Fuse blows or circuit breaker

trips when light is turned on. 1. Discontinue use. 1. Call customer service

The manufacturer warrants this lighting xture to be free from defects in materials and workmanship for a period of

(10) years from the date of original purchase by the consumer. The xture is not warrantied for use in a commercial

or retail application. The warranty is limited to use in a residential environment. We will repair or replace (at our

option) the unit in the original color and style if available, or in a similar color and style if the original item has been

discontinued, without charge. Defective units must be properly packed and returned to the manufacturer with a letter

of explanation and your original purchase receipt showing date of purchase. Call 1-800-291-8838 to obtain a return

authorization number and an address where to ship your defective product. Note: C.O.D. shipments will NOT be

accepted. The liability of the manufacturer is in any case limited to replacement of the defective light xture product.

The manufacturer will not be liable for any other loss, damage, labor costs or injury which is caused by the product.

This limitation upon the liability of the manufacturer includes any loss, damage, labor costs or injury which is (I)

to person or property or otherwise; (II) incidental or consequential in nature; (III) based upon theories of warranty,

contract, negligence, strict liability, tort, or otherwise; or (IV) directly, or indirectly related to the sale, use, or repair of

the product. This warranty gives you specic rights, and you may also have other rights which vary from state to state.

allen + roth®est une marque de commerce

ARTICLE #2592470

Panneau à DEL de 30 cm

x 122 cm

Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au

1 866 439-9800, entre 8 h et 20 h (HNE), du lundi au dimanche. Vous pouvez également communiquer avec nous en tout temps à partir de

la page Lowes.com/allenandroth.

Numéro de série : Date d’achat :

VR20201

PIÉCE DESCRIPTION QUANTITÉ

A Plaque de montage 1

BCrochets de soutien en l

métallique 2

CPanneau à DEL 1

D Cadre 1

CONTENU DE L’EMBALLAGE ................................................................................................................................10

QUINCAILLERIE INCLUSE .....................................................................................................................................11

PRÉPARATION ........................................................................................................................................................11

CONSIGNES DE SÉCURITÉ...................................................................................................................................11

INTERRUPTEUR À GLISSIÈRE À 5 POSITIONS...................................................................................................12

INSTRUCTIONS POUR L’ASSEMBLAGE...............................................................................................................12

ENTRETIEN .............................................................................................................................................................16

DÉPANNAGE ...........................................................................................................................................................16

GARANTIE ...............................................................................................................................................................16

LISTE DES PIÈCES DE RECHANGE......................................................................................................................16

TABLE DES MATIÈRES

CONTENU DE L’EMBALLAGE