Allot SG-9100 Istruzioni per l'installazione

SG-9100

Hardware Guide

SG-9100 Hardware Guide

ii SG-9100 Hardware Guide

Version History

Each document has a version and a build number. You can tell the exact version and

build of this document by checking the top row of the table below.

Document updates are released in electronic form from time to time and the most up to

date version of this document will always be found on Allot’s online Knowledge Base.

Doc

Revision

Internal

Build

Published

Summary of Changes

2 r2b7 17.11.19 Copper Bypass added, Transceivers information

added, general updates

SG-9100 Hardware Guide

iii SG-9100 Hardware Guide

Contents

1Introducing the SG-9100 ...............................................................................................1-1

1.1 Planning Your Deployment...............................................................................1-2

1.2 Packing List........................................................................................................1-2

SG-9100 V2 ..........................................................................................1-2

SG-9100 V1 ..........................................................................................1-2

1.3 Cabling and Transceivers ..................................................................................1-4

Cable types ..........................................................................................1-4

Transceivers.........................................................................................1-5

Connectors ..........................................................................................1-5

2Connectors and LEDs.....................................................................................................2-1

2.1 SG-9100 V2........................................................................................................2-1

Front Panel ..........................................................................................2-1

Rear Panel............................................................................................2-3

2.2 SG-9100 V1........................................................................................................2-6

Front Panel ..........................................................................................2-6

Rear Panel............................................................................................2-8

3Bypass............................................................................................................................3-1

3.1 External Bypass Unit .........................................................................................3-1

HD 8 Fiber or Copper Bypass Unit.......................................................3-2

HD 16 Fiber Bypass Unit ......................................................................3-3

3.2 External Bypass Control Cabling .......................................................................3-5

4Power Connectivity Planning ........................................................................................4-1

4.1 Power Source Requirements ............................................................................4-1

Electrical GroundingRequirements.....................................................4-2

4.2 Cable and Cord Specifications ..........................................................................4-2

AC Power Cord Specifications .............................................................4-2

5Preparation and Installation..........................................................................................5-1

5.1 Unpacking the SG-9100 ....................................................................................5-1

5.2 Mounting the SG-9100 .....................................................................................5-2

Space and Airflow Requirements .......................................................5-2

Rack Mounting the Service Gateway

................................................5-3

SG-9100 Hardware Guide

iv SG-9100 Hardware Guide

6Deploying the SG-9100..................................................................................................6-1

6.1 Connecting Network Traffic..............................................................................6-1

6.2 Configuring Active Redundancy........................................................................6-5

Physical Connections...........................................................................6-6

Configuration.......................................................................................6-8

6.3 Powering Up the SG-9100...............................................................................6-10

6.4 Accessing the SG-9100....................................................................................6-11

Identifying the Revision.....................................................................6-11

Accessing the SG-9100 via Physical Ports .........................................6-11

Accessing the SG-9100 V1 via the TSM.............................................6-11

Accessing the SG-9100 V2 via the XCC/BMC.....................................6-14

6.5 Configuring the SG-9100.................................................................................6-22

Connecting Management Traffic.......................................................6-22

Changing the AOS Passwords............................................................6-23

7Technical Information ...................................................................................................7-1

7.1 Technical Specifications....................................................................................7-1

7.2 Environmental Specifications ...........................................................................7-3

7.3 Safety Certifications..........................................................................................7-3

7.4 Environmental Certifications ............................................................................7-3

7.5 Bypass Physical Specifications ..........................................................................7-3

7.6 Laser Safety Requirements ...............................................................................7-4

Laser Classification ..............................................................................7-4

Laser Information ................................................................................7-4

Laser Safety Statutory Warning ..........................................................7-4

Training for Laser Safety......................................................................7-4

Laser Device Operating Precautions ...................................................7-4

SG-9100 Hardware Guide

1Introducing the SG-9100

Allot Service Gateway 9100 provides a powerful service delivery platform in an

Intel-based appliance, designed especially for cloud data center, enterprise, and ISP

networks. Its small-footprint is equipped with the same rich features and functions

as our chassis-based Allot Service Gateway, enabling you to roll out Security as a

Service as well as other revenue-generating services rapidly and cost-effectively,

while you lower your total cost of ownership and accelerate ROI.

•Powerful and cost-efficient service delivery platform

•Real-time Layer-7 application visibility, policy enforcement and charging

•Real-time visibility of encrypted traffic

•Supporting turnkey Security as a Service solutions

•Deployment and management across any access

•Easy installation and pay-as-you-grow scalability

The SG-9100 comes in two different revisions. V2 is a 2U unit with 16 ports while

V1 is a 1U unit with 12 ports.

When logged into the SG-9100 via TSM/XCC or SSH, run the following command to

check with revision this model is:

getinfo

When the System Information Menu appears, select number 3 to see Vendor

information.

Under Product Name, the SG-9100 V2 will be listed as a ThinkSystem SR550, while

V1 will be listed as a ThinkServer RD550.

Introducing the SG-9100

1-2 SG-9100 Hardware Guide

1.1 Planning Your Deployment

This equipment is intended to be installed by trained service personnel and in

environments where access by unauthorized personnel is restricted (Restricted

Access Location). The SG-9100 complies with the requirements for operator access.

Please note that the power resources used by the SG-9100 must be planned and

installed by a qualified electrical engineer only. Before installing or using the SG-

9100, please read all Safety Information carefully to avoid electrical hazards that

can result in injury or loss of equipment.

In addition, be aware that all network and power connections to the SG-9100 are

from the rear of the device so there must be adequate space behind the unit for

safe access at all times.

1.2 Packing List

Verify that the following items are included with the SG-9100:

SG-9100 V2

1. SG-9100 V2 System

2. Pair of AC power IEC-320 C13/C14 cables

3. Up to 16 SFP/SFP+ Optical Transceivers (either SR, LR, SX or LX5 Fiber) or

Copper transceivers.

Note: All Transceivers MUST be provided by Allot specifically for the SG-9100. Any

other Transceivers will not function in the SG-9100.

4. Ethernet cable straight CAT6 RJ45_2_RJ45 3m for management (Allot P/N

C243010)

Note Cables to connect from the Service Gateway to the Bypass are included with

the Bypass Unit. Cables to connect from the Bypass Unit to the Network are

not provided by Allot.

Note: The following components of the SG-9100 V2 are replaceable and hot

swappable: Power Supply Units and Hard Dick Drives.

The following components SG-9100 V2 are replaceable but NOT hot

swappable: NIC cards, RAM and RAID cards.

SG-9100 V1

1. SG-9100 V1 System

2. Pair of AC power IEC-320 C13/C14 cables

Introducing the SG-9100

1-3 SG-9100 Hardware Guide

3. Up to 12 SFP/SFP+ Optical Transceivers (either SR, LR, SX or LX5 Fiber) or

Copper transceivers.

Note: All Transceivers MUST be provided by Allot specifically for the SG-9100. Any

other Transceivers will not function in the SG-9100.

4. Ethernet cable straight CAT6 RJ45_2_RJ45 3m for management (Allot P/N

C243010)

Note Cables to connect from the Service Gateway to the Bypass are included with

the Bypass Unit. Cables to connect from the Bypass Unit to the Network are

not provided by Allot.

Introducing the SG-9100

1-4 SG-9100 Hardware Guide

1.3 Cabling and Transceivers

Cable types

CONNECTIONS MM CABLE TYPE SM CABLE TYPE COPPER CABLE TYPE

Management Port

Ethernet (CAT 6) (Allot

P/N C243010 included)

Dual RJ-45

Connectors

Ethernet (CAT 6)

(Allot P/N C243010

Included) or Fiber.

Dual RJ-45 Connectors

Ethernet (CAT 6)

(Allot P/N C243010

Included) or Fiber.

Dual RJ-45 Connectors

Between Bypass

and System

8P Bypass

8 x Standard 62.5/125

MM fiber optic cross

cable.

(Allot P/N C411055

included with Bypass).

Full Duplex LC to Full

Duplex LC

Connectors

16P Bypass:

16 x Standard 62.5/125

MM fiber optic cross

cable

(Allot P/N C411030

included with Bypass).

Full Duplex LC to Full

Duplex LC

Connectors

8P Bypass

8 x 9/125 SM fiber

optic cross cable.

(Allot P/N C411029

included with Bypass).

Full Duplex LC to Full

Duplex LC

Connectors

16P Bypass:

16 x 9/125 SM fiber

optic cross cable.

(Allot P/N C411029

included with Bypass).

Full Duplex LC to Full

Duplex LC

Connectors

8P Bypass:

8 x CABLE STR CAT6 2x RJ45

(Allot PN C411019 included

with Bypass).

Dual RJ45 Connectors.

Service Gateway’s

Bypass Connector

to Bypass Unit

USB Bypass Cable Allot

P/N C245055

(Included with Bypass).

USB to DB-9

Connectors.

USB Bypass Cable

Allot P/N C245055

(Included with

Bypass).

USB to DB-9

Connectors.

USB Bypass Cable Allot P/N

C245055

(Included with Bypass).

USB to DB-9 Connectors.

Between Bypass

Unit and Network

Standard 62.5/125 or

50/125 MM fiber optic

cross cable

(Not Included).

Full Duplex LC to Full

Duplex LC

Connectors.

Standard 9/125 SM

fiber optic cross cable

(Not Included).

Full Duplex LC to Full

Duplex LC

Connectors

STR CAT6 Copper cabling

(Not Included).

Dual RJ45 Connectors

Introducing the SG-9100

1-5 SG-9100 Hardware Guide

Transceivers

Note: All Transceivers MUST be provided or approved by Allot specifically for the SG-

9100. Any other Transceivers will not function in the SG-9100.

The following transceivers (available from Allot) may be used with the SG-9100:

10G Fiber

•SG-TRNSCV-10G-SR

•SG-TRNSCV-10G-LR

1G Fiber (Dual Rate)

•SG-TRNSCV-1G-SX-A

•SG-TRNSCV-1G-LX5-A

1G Copper (10/100/1000)

•SG-TRNSCV-1G-COP-A

Note: 1G Copper interfaces may only use the 8 Port Bypass Unit if available, limiting

the number of ports which may be used on the SG-9100.

Connectors

The SG-9100’s 8-port and 16-port Fiber Bypass Units use Multi Mode fiber (MM) or

Single Mode fiber (SM) dual LC Connectors. The 24-port Fiber Bypass unit uses MTP

Fiber connectors. The 8-port Copper Bypass Unit uses dual RJ45 connectors.

Figure 1-1 – Full Duplex LC Connector

Note: Color and appearance of actual connectors may vary.

SG-9100 Hardware Guide

2Connectors and LEDs

Allot Service Gateway 9100 (SG-9100) provides a high performance service delivery

platform with rich functionality in an efficient, small-footprint appliance. With high-

density connectivity, the platform allows enterprises, cloud data centers and ISP

networks to satisfy the ever-growing demand for Internet bandwidth and network-

based services in cost-efficient manner.

2.1 SG-9100 V2

Figure 2-1 – SG-9100 V2

Front Panel

Front Panel Buttons and LEDS Description

Figure 2-2 – SG-9100 V2 Front Panel Buttons and LEDs

Power

Button and

LED

System ID

Button

Altri manuali per SG-9100

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Allot Portale

Allot

Allot SG-9500 Series Istruzioni per l'installazione

Allot

Allot SG-9500 Series Istruzioni per l'installazione

Allot

Allot SG-9100 Istruzioni per l'installazione

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente