allpa PT1356 Manuale tecnico
Dear User,
we are sincerely grateful to you for purchasing one of our products.
We are sure that the appliance modern, functional and easy to use, built with the finest materials
and components will satisfy all your needs.
We would ask that you read the instructions within this booklet very carefully so as to enable you
to obtain quality results from the outsets.
The appliance must be installed only by a qualified electrician in compliance with the
instructions provided. The manufacturer declines all responsability for improper installation.
USE, INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR ELECTRICAL
BUILT-IN HOT PLATES
The manufacturer is not responsible for any transcription errors or misprints contained in this handbook and,
furthermore, reserves the right to make any modification on the products, which might be deemed
necessary or usefull, this being in the user’s interest, without altering their basic operating or safety
features. This cook top was designed to be used exclusively as a cooking appliance: any other use
(such as heating rooms) is to be considered improper and dangerous.
COD. 04073DN - 24.06.2016
MODEL: PT1356 - PT1358
2
WARNING: The appliance and its accessible parts become hot
during use.
Care should be taken to avoid touching heating elements.
Children less than 8 years of age shall be kept away unless
continuously supervised.
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without
supervision.
WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire. NEVER try to extinguish a fire with
water, but switch off the appliance and then cover flame e.g. with a lid
or a fire blanket.
WARNING: Danger of fire: do not store items on the cooking
surfaces.
WARNING: If the surface is cracked, switch of the appliance to
avoid the possibility of electric shock.
WARNING: do not use a steam cleaning unit of: stoves, hobs
and ovens.
WARNING: the hob is not designed to work with an external timer,
or with a remote control system.
WARNING: Use only hob guards designed by the manufacturer of
the cooking appliance or indicated by the manufacturer of the
appliance in the instructions for use as suitable or hob guards
incorporated in the appliance. The use of inappropriate guards
can cause accidents.
WARNING:The cooking process has to be supervised. A short
term cooking process has to be supervised continuously.
3
DESCRIPTION OF THE HOT PLATES
TYPE: PCZ VTC 30
MODEL: PT1356
TYPE: PCZ VTC 6077
MODEL: PT1358
The appliance has 2/4 heating elements of different sizes and power levels. The heating elements are of
the Hi-light type, which come on after a few seconds, and the heat is adjusted using the controls on the
front panel, from a minimum of 1 to a maximum of 9.
1 Radiant electric heating element Hi-light Ø 14,0 cm of 1200 W
2 Radiant electric heating element Hi-light Ø 18,0 cm of 1800 W
3 Touch control
CAUTION:
In case of hotplate glass breakage:
● shut immediately off all burners and any electrical
heating element and isolate the appliance from
the power supply;
● do not touch the appliance surface;
● do not use the appliance.
4
DESCRIPTION OF THE FRONT PANEL CONTROLS
DESCRIPTION OF THE HOT PLATES
1 - Heating element 1 – button
2 - Heating element 1 + button
3 - ON/OFF button
4 - Clock programming – button
5 - Clock
6 - Clock programming + button
7 - Safety lock button
8 - Heating element 2 – button
9 - Heating element 2 + button
11 - Clock
14 - Safety lock button
15 - ON/OFF button
16 - Timer display
17 - Capacity levels display (0 - 9)
MODEL: PT1356
MODEL: PT1358
5
DESCRIPTION OF THE HOT PLATES
IMPORTANT: the hob instructions must state that the appliance is not destined
for use with an external timer or a separate remote control system.
WARNING FOR USE:
►the appliance is built to perform the following function: cooking and heating food. Every
other use must be considered improper.
►Never use this appliance to heat the environment.
►Do not attempt to change the technical characteristics of the product because it can be
dangerous.
►
If you should not to use this appliance any more (or replace an old model), before disposing
of it, make it inoperative in conformity with current law on the protection of health and the
prevention of environmental pollution by making its dangerous parts harmless, especially
for children who might play on an abandoned appliance.
► Do not touch the appliance with wet or damp hands or feet.
►Do not use the appliance barefoot.
►The manufacturer will not be liable for any damage resulting from improper, incorrect or
unreasonable use.
►During, and immediately after operation, some parts of the cook top are very hot: avoid
touching them.
►If the ceramic glass hob is not cleaned immediately, there is a risk of residues becoming so
encrusted that they will be impossible to remove after the hob has cooled.
►
Before cooking for the first time, it is necessary to clean the hob as follows: switch on the
front heating elements to the maximum for at least 30 minutes, heating pans full of water.
After 30 minutes, switch off the front heating elements and switch on the rear heating
elements plus the central heating element, where applicable, to the maximum. This is
necessary to eliminate that “new smell” and to allow any humidity which may have formed
during the production process to evaporate. This is necessary for the correct operation of
the electronic circuits and the control panel. If the controls do not work properly when the
30 minutes are up, there is still some humidity inside: leave the heating elements on until
all the humidity has completely evaporated, then switch off the hob.
6
1) USER INSTRUCTIONS
Every time that any symbol is pressed, it is confirmed by a check beep. The functions of hobs that use
this type of technology are activated by gently pressing the serigraph symbols on the surface of the hob.
The first time the hob is connected to the electricity supply, an operating check will be run automatically
and all the warning lights will come on for several seconds.
2) ARRANGEMENT OF THE HEATING ELEMENTS
CENTRAL REAR
CENTRAL FRONT
When the hob is in standby, the control panel lock is active and the relative led is on.
After removing the control panel lock (pressing the symbol for 2 seconds), switch on the hob by
pressing the button for a few seconds.
If no function is activated within 10 seconds of switching on the hob, it switches off automatically.
The associated heating element is indicated net to each control area. Identify the heating element to be
activated ( ) and activate it using the buttons and to regulate the level of cooking required on a
user scale of 1 (minimum) to 9 (maximum).
3) TIMER
There is a timer for setting cooking times from 1 to 99 minutes (symbol ).
After activating the cooking area required, selecting it on the display, activate the timer by pressing the
or keys above the symbol. Then return to the heating element to be programmed by pressing its
or keys. Return to the timer and set the programming time using the or keys. The
programmed heating element is highlighted by the corresponding led above the cooking level indicator.
The timer will start 5 seconds after the last key has been pressed and the heating element will operate until
the number on the display reaches 0. The heating element will then switch off automatically. When the time
ends a sequence of beeps will be repeated at 3 second intervals for 1 minute.
During timed cooking it is possible to change the operating power and the cooking time. Every time the
and symbols of the cooking area are pressed, the heating element operating power is increased
or reduced.
CHANGE THE REMAINING TIME OF AN ACTIVE ELEMENT
To change the amount of time remaining, it is necessary to press the or key of the heating element
until the led position in the cooking area switches on. Then the operating time can be changed using the
and symbols of the timer.
DESCRIPTION OF THE HOT PLATES
MODEL: PT1356
7
DESCRIPTION OF THE HOT PLATES
4) FUNCTIONS COMMON TO ALL MODELS
Lock function ( ): this function prevents the hob from being switched on accidentally (childproof
safety device). To activate it, the sensor must be pressed for about three seconds (the warning light
comes on). It is not possible to operate the heated areas when is active. While the heaters are still
working, it is possible to switch off the heating areas in . This function is deactivated by pressing the
sensor for two seconds, for all configurations.
5) RESIDUAL HEAT
Every plate has a device to indicate the presence of residual heat. After any plate has been switched off,
a flashing light may be shown on the display. This signal indicates that the particular cooking area is
still very hot. It is possible to start cooking food when the light is flashing, reactivating the heating
element required.
6) SWITCHING OFF THE HEATING ELEMENTS
When the plates are switched off, the operating power display indicates 0.
The plate will be automatically deactivated 5 seconds after the display indicates 0. If the plates are hot,
the residual heat indicator will appear after they are switched off .
7) SWITCHING OFF THE HOB
The hob is switched off by keeping the symbol pressed for one second, even with the plates in
operation. All the plates will be deactivated and the hob will be switched off completely. If the plates are
hot, the residual heat indicator will appear a few seconds after the hob is switched off.
7/A) AUTOMATIC SAFETY OFF
If the power level is not changed during a present time, the corresponding heater turns off automatically.
The maximum time a heater can stay on, depends on the selected cooking level.
If the heater is working in Low-temp Function, the level assumed is 3.
Power level Max. time on (hours)
1 10
25
35
44
53
62
72
82
91
8
8) ARRANGEMENT OF THE HEATING ELEMENTS
LEFT ANTERIOR LEFT REAR
RIGHT REAR RIGHT ANTERIOR
When idle, the hob will be completely switched off.
After switching on the hob by pressing the button, use the button to activate the heating
element required (the indicator flashes) then use the and buttons to adjust the cooking level
and confirm it using the button (pressed initially).
The cooking levels range from 1 (minimum to 9 (maximum). The cooking level must be regulated within 3
seconds of activating the cooking area, otherwise it will be automatically deactivated.
9) TIMER
There is a cooking time with a time range of 1 to 99 minutes (symbol ).
After activating the cooking area required, as shown above, press the button (pressed initially). The
indicator will flash. Then press the button and the corresponding indicators will come on. Use the
and buttons to enter the minutes and confirm using the button (pressed initially).
The cooking area programmed will be highlighted by a led near the timer indicators.
It is also possible to use timed cooking on several heating elements at the same time: after setting the
timer on the first heating element, press the button to shift the timer controls to the next active
heating element (the led between the and symbols of the second active cooking area) and then
set the cooking time as indicated earlier.
Confirm it by pressing the button (pressed initially) again.
CHANGE THE REMAINING TIME OF AN ACTIVE ELEMENT
Enter the programmed cooking area by pressing the button and regulate the remaining time using
the and buttons, confirming everything.
MODEL: PT1358
DESCRIPTION OF THE HOT PLATES
9
DESCRIPTION OF THE HOT PLATES
Power level 12345678
Time (sec.) 1’12’’ 2’44’’ 4’48’’ 5’28’’ 6’30’’ 1’12’’ 2’44’’ 2’44’’
FIG. A FIG. B
10) HEAT-UP FUNCTIONS
This function takes the cooking level to maximum power for a defined time.
Activate the heat-up function
After removing the control panel lock (pressing the symbol for 2 seconds), switch on the hob by
pressing the button for a few seconds.
Use the button to activate the heating element required (the indicator flashes) then use the
and buttons to adjust the cooking level to 9 (maximum) and press again the button. When the
sensor is pressed, the display show the power level blinking and decimal point of the display fixed on
display for 10 seconds (Fig. A and B), during which time the desired power level must be selected
(between 1 and 8). Confirm it using the button (pressed initially). After this time, a beep sounds and
dot point is fixed on the display with the power of the selected heater with the same intensity. This
indicates that the heat-up function is ON.
Deactivate the heat-up function
When the heat-up function ends, a beep sounds, the dot point disappears and the heater remains at the
selected power level.
To activate the heating element press the button, after press the button when the heat-up function
is activated, the function is cancelled.
10
11) FUNCTIONS COMMON TO ALL MODELS
Lock function ( ): this function prevents the hob from being switched on accidentally (childproof
safety device). To activate it, the sensor must be pressed for about three seconds (the warning light
comes on). It is not possible to operate the heated areas when is active. While the heaters are still
working, it is possible to switch off the heating areas in . This function is deactivated by pressing the
sensor for two seconds, for all configurations.
12) RESIDUAL HEAT
Every plate has a device to indicate the presence of residual heat. After any plate has been switched off,
a flashing light may be shown on the display. This signal indicates that the particular cooking area is
still very hot. It is possible to start cooking food when the light is flashing, reactivating the heating
element required.
13) SWITCHING OFF THE HEATING ELEMENTS
When the plates are switched off, the operating power display indicates 0.
The plate will be automatically deactivated 5 seconds after the display indicates 0. If the plates are hot,
the residual heat indicator will appear after they are switched off .
14) SWITCHING OFF THE HOB
The hob is switched off by keeping the symbol pressed for one second, even with the plates in
operation. All the plates will be deactivated and the hob will be switched off completely. If the plates are
hot, the residual heat indicator will appear a few seconds after the hob is switched off.
14/A) AUTOMATIC SAFETY OFF
If the power level is not changed during a present time, the corresponding heater turns off automatically.
The maximum time a heater can stay on, depends on the selected cooking level.
If the heater is working in Low-temp Function, the level assumed is 3.
DESCRIPTION OF THE HOT PLATES
Power level Max. time on (hours)
1 10
25
35
44
53
62
72
82
91
Questo manuale è adatto per i seguenti modelli
1
Indice
