Alltec Network Evolution Manuale utente

Evolution

User Manual

Alltec Network, Butts Business Centre, Fowlmere, Royston, Herts, SG8 7SL.

Tel 01763 208222 Fax 01763 208906

[email protected] www.alltec.co.uk

GUARANTEE Page 3

WARRANTY Page 4

SCOPE Page 5

WARNINGS / HEALTH & SAFETY Page 6 / 7

DO’S & DON’T ’ S Page 8

SAFETY DEC A L S Page 9

LIFTING AND HANDLING INSTRUCTIONS Page 10

SETTING AND OPERATION Page 11 / 12 / 13

MAINTENANCE INSTRUCTIONS Page 14

PARTS ORDERING L I N E Page 15

REAR OPERATION Page 16

PANEL OPERATION Page 17

FRONT OPERATION Page 18

CERTIFICATE OF QUALITY ASSURANCE Page 19

YOUR NOT E S Page 20

INDEX

1. WELCOME Page 2

10.

11.

12.

13.

14.

15.

16.

ALLTEC™ Evolution 2

Congratulations!

You are now the proud owner of an

ALLTEC™ Evolution

carpet and upholstery cleaning

machine, and you have every reason to be proud – for all the ALLTEC™ models embody good

design, reliability and a mechanical speciﬁcation second to none.

Your ALLTEC™ Evolution machine is 100% British made – in fact we manufactured it in our

purpose-built workshops at Butts Farm, Fowlmere. We are proud that your machine is not

mass-produced, but is hand built in an organised and efﬁcient environment. We are also proud

of the dedicated team of professionals who build them.

We aim to make the very best machines possible – and we do this by using only ﬁnest quality

components, and by employing the safest and most sound methods of construction. Unlike

most of our competitors that sell cheaper foreign machines with their ‘own label’ on them or the

UK manufacturers, who restrict access to their production line - we positively encourage you

Our concern for ‘getting it right’ is backed up by the Certiﬁcate of Quality Assurance that follows

every machine through every stage of its manufacturing, this is quite an elaborate and detailed

procedure. Once we have ﬁnished the manufacturing stage of the machine it is then put

through a series of tests to ensure all systems are fully operational, they are then double-

checked by another service engineer to ensure that they are fault-free when they leave our

workshops. Only then, when the machines are fully double-checked, cleaned and polished are

they allowed into our showroom.

The ﬁnal check is made by YOU. When you collected your Alltec Evolution we offered free basic

training so YOU could check over and run every part yourself. By doing this we check once

again that the machine you have just bought is in perfect working order. If you had the machine

sent by carrier please double check all working parts before you go out cleaning with it to

familiarise your self with its operations.

We felt it important to include this page in the manual so you would be aware of the importance,

we as a company attach to craftsmanship, quality control, and above all to ensuring customer

satisfaction with the ﬁnished product.

We’re sure you’ll be delighted with your new ALLTEC™ Evolution machine as so many of our

customers already are.

Please read the following manual carefully, so that

you get the very best out of using your new machine

to come and inspect out workshops - and that’s any day, any time.

ALLTEC™ Evolution

GUARANTEE

We guarantee our ALLTEC™ Evolution machine for a period of one

year or 500 hours, which ever is sooner, from the recorded date of purchase.

During that time we undertake to exchange or repair free of charge any part found

to be defective, provided that:-

NB: Labour is not included unless the machine (or failed part) is returned carriage and

insurance paid both ways to our Service Department at Butts Farm. Prior

telephone notice is required of the customer’s intention to return parts/machines

and a note detailing the problem should be enclosed.

Excluded from the guarantee are consumables such as brushes, ﬁlter, seals,

washer and hoses.

Parts replaced under guarantee are themselves guaranteed only for the remaining

unexpired portion of warranty and not for a new term.

Water pumps and vacuum motors supplied after the initial one-year warranty

period are subject only to a three-month term of warranty.

How Our Warranty System Works

Our warranty system is simple and fair. It enables 99% of repairs to be speedily

carried out by the operator, and it works like this.

1. In the event of a malfunction, contact our Service Manager on (01763) 208222

and advise him of the symptoms and nature of the problem

2. Having diagnosed the problem, the Service Manager will respond by booking

your machine in for repair here or by sending you the necessary replacement

parts for you to ﬁt yourself (the parts will be charged to your account). All parts

are easily replaced using the most basic of tools, so within 24 hours you should

be back in business.

3. Once your machine is working we ask you to return faulty parts to us, but do

please insure for appropriate amount before posting, as it is your responsibility

to ensure their safe return. On receiving the faulty parts a credit will go on your

account.

 The machine has been used in accordance with the instruction manual

 The machine has not been subject to miss-use, frost damage, neglect or accident

 No chemicals, other than those supplied for use in hot water extraction machines

have been used. Use of other agents could cause damage to the machine and will

invalidate the guarantee.

ALLTEC™ Evolution 4

MACHINE REGISTRATION & SERVICE DOCUMENT

PURCHASE CHECKED IN DOUBLE CHECKED AT WARRANTY WARRANTY

DATE WORKSHOP BY SALE/DESPATCH BY START DATE EXPIRY DATE

Name:………………………………………………………. Serial No:……………………………………

Trading name:……………………………………………… Make:………………………………………...

Address:……………………………………………………. Model:……………………………………….

……………………………………………………………… Colour:……………………………………….

……………………………………………………………… Vac Motors:………………………………….

……………………………....PostCode:…………………… Water Pump:…………………………………

Tel No:………………………Fax No:…………………….. Calibration:…………………………………..

HEATER LEAD TESTS MOTOR LEAD TESTS SERVICE HISTORY

DATE INSULATION EARTH

DATE SERVICE PLACE

URGENT WARRANTY REGISTER

To register your machine for 12 months warranty from the purchase date, you must ﬁll in and

return the slip below within 28 days of purchase.

Return to: - Alltec Network, Butts Farm, Fowlmere, Nr Royston, Herts, SG8 7SL.

Name:………………………………………………………. Purchased From:…………………………….

Trading name:……………………………………………… Date:…………..… Serial No:……………….

Address:……………………………………………………. Make:……………..Model:…………………..

……………………………………………………………… Colour:……………………………………….

……………………………………………………………… Vac Motors:………………………………….

……………………………....PostCode:…………………… Water Pump:…………………………………

Tel No:………………………Fax No:…………………….. Calibration:…………………………………..

ALLTEC™ Evolution 5

SCOPE

DESCRIPTION

The ALLTEC™ Evolution. –

Is by far the most popular carpet cleaning

machine of all the ALLTEC™ range. It is

built to the highest standards of

mechanical and electrical engineering with

up-to-the minute design and value for

money. This appliance is suitable for

commercial AND domestic use.

The twin HD 3 stage vacuum motors produce

the highest airﬂow rate of any other

machine, which helps, reduce drying times

and speeds cleaning. The water pump,

which is the heavy duty pump with by-

pass, which can be controlled from 0-600 psi

for improved cleaning power. The instrument

panel incorporates easy to read gauges

for, water temperature and vacuum.

CONSTRUCTION

The body is made from a moulded marine

quality ﬁbreglass. Mounted on a sturdy

aluminium base with 10” stair climbing

wheels on the rear and full-swivel twin 3

inch diameter castor wheels on the front.

The rear tray is easily removed for all

mechanical and electrical components.

MAIN ADVANTAGES

Twin 2.5 HP 3-stage Vacuum motor for

high airﬂow. 0-600psi

controllable water pressure

Air Box – exhaust deﬂect systems for

improved motor performance * Large

capacity tanks for less frequent ﬁlling.

DIMENSIONS

556mm Width x 808mm Length x 900mm

Height (21.89” W x 31.8” L x 35.43” H)

WEIGHT

Total 49kgs (108lbs) ~ 60kgs (132lbs)

CAPACITIES

Solution tank 60 litres (13.19 gallons)

Waste tank 27 litres (5.93 gallons)

EXTERNAL CONNECTIONS

Electrical connections

VACUUM MOTORS

Twin Electro 3-stage, 1.k6w, 2.5hp,

parallel system for greater airﬂow.

WATER PUMP

600 psi Pump Tec Piston Pump

POWER CABLE

2 x 10 metres 3 wire earthed cable ﬁtted

with 13 amp moulded plug to meet BS

EXTERNAL CONNECTIONS

Solution connections

HOSE ASSEMBLY

Vacuum Hose: 50mm Dia x 3.75 Metres

Crush proof Hose.

Whip hose: 38mm Dia x 3.75 Meters

Crush proof Hose

Solution Hose: 8mm Dia x 7.5 Metres

3000 psi rated rubber Hose

FLOOR WAND

A polished stainless steel easy glide12”

“s” bend with twin jets and adjustable

plastic coated handle.

HAND TOOLS (Optional)

Our range of hand tools consists of

economy clear type to very high quality

aluminium tools.

WARRANTY

Full 12 months warranty on all parts from

recorded data of purchase.

AFTER SALES

We offer an excellent after sales service

with 100% spares availability form stock.

Our SPEEDPART service allows all parts

ordered before 3pm on any weekday to be

despatched the same day and should then

be with you the next morning.

CHEMICALS

We highly recommend the ULTIMATE

MASTER for use in the machine with the

rest of our professional range of

chemicals.

NOISE LEVELS

Sound pressure level = tbc dB(A)

Sound power level = tbc dB(A)

PLEASE NOTE

All speciﬁcations are approximate and are

subject to change without prior notice

HEATER

3Kw in tank heater 0-70oC with safety cut out.

2Kw in-line heat & run system with 2 stage power

control.

ALLTEC™ Evolution

WARNINGS

Throughout this manual these symbols & notes are used to indicate the

following;

DANGER

Imminent danger that is likely to cause serious injury or

loss of life.

WARNING

Safety situations that may cause serious injury or loss of

life.

CAUTION

Safety situations that may cause problems or damage to the

equipment.

NOTE

To draw attention to procedures which it is essential to

observe for correct operation.

1) Only qualiﬁed people to work on and operate this machine.

2) Before servicing or repair familiarise yourself with the relevant instruction

manual.

3) Never use the machine in aw ay it was not designed for.

4) This machine must always be connected to earth.

5) Always Disconnect the Electrical Supply due to the hazard of electricity

during cleaning or maintenance by removing the plugs from the socket-

outlet.

Failure to heed Safety Precautions could lead to severe injury.

We recommend using the following Personal Protective Equipment

•Safety Glasses

• Ear Protection

• Disposable Gloves

ALLTEC™ Evolution 7

CAUTION

This appliance is not suitable for picking up hazardous dust.

CAUTION

This appliance is for dry use only and is not to be used or stored

outdoors in wet conditions.

WARNING

Only use the brushes provided with the appliance or those

speciﬁed in the instruction manual. The use of other brushes

may impair safety.

CAUTION

If foam or liquid escapes from the appliance, switch off

immediately.

ALLTEC™ Evolution

Do check frequently to make sure your machine is fully earthed; that the mains plug

contains a fuse of the correct rating (amp 13), and that the plug is connected at all

times to a 13 amp fused supply.

Do regularly examine the supply cord for damage, such as cracking or ageing. If

damage is found, replace the cord before further use.

Do only replace the supply cord with the type speciﬁed in the instruction manual.

Do keep the machine well ventilated. Do not position close up against a wall or in a

closed hall way

Do remember to add Anti-Foam to the waste tank (if required) when it is emptied.

Do keep the two vacuum ﬁlters (in the waste tank) free of ﬂuff and debris, otherwise it

could cut off the airﬂow prematurely.

Do regularly clean the waste tank water level limiting device in accordance with the

instructions and examine it for signs of damage.

Do lubricate hose connectors regularly with silicone lubricant.

Do remember to switch off the heater before emptying the solution tank

Don’t use a hose connected to a tap to ﬁll the machine solution tank – it’s all too

easy to get distracted and allow the tank to overﬁll – with potentially disastrous

results!

Don’t make do with one bucket for both ﬁlling and emptying the machine. Use one

bucket for the clean water and a separate one for the waste. That way you will avoid

getting dirt and grit in the solution tank and ultimately the water pump. Grit and water

pumps don’t mix.

Don’t use cleaning agents other than those supplied for use with the machine. Use

of other agents could cause damage to the machine – and may also harm the

materials being worked on.

Don’t allow the temperature of the water in the solution tank to exceed 70ºC (50ºC

when using Ultimate Master)

Don’t try to carry your machine up or down stairs if on your own or part full of water

Don’t leave your machine or any solution holding equipment out at night in your van

when it could be exposed to freezing conditions.

Don’t continue to use the machine in the event of a malfunction. Switch off at the

mains, withdraw the plug from the mains outlet and investigate the fault more fully. If

in doubt call our service workshop on 01763 208222 or in the event of an electrical

problem – call a qualiﬁed electrician.

Do’s and Don’t’s

Don’t allow the rotating brushes to come into contact with the supply cord ie when

using a Rotovac or other rotary cleaning equipment.

ALLTEC™ Evolution 9

SAFETY DECALS

Nameplate

Read the instructions

Electrical hazard

ALLTEC NETWORK

Butts Farm Business Units, Fowlmere, Royston, Herts. SG8 7SL

Tel: 01763 208222 Fax: 01763 208906

Product: Wet Carpet & Upholstery Cleaner

Serial No.: xxxxxxxxxx

Date Code: 200X / XX / XX

Voltage: 230 V ∼ Pump: 0 ~ xxx psi

Power: 3.0 kw Vacuum: 0 ~ 8 mmHg

Current: 13 A Temp.: 0 ~ 70 °C

Frequency: 50 Hz

REFER TO USER MANUAL BEFORE USE & MAINTENANCE

Indice

Manuali Aspirapolvere popolari di altre marche

Bissell

Bissell LittleGreen Proheat 1425 Series Manuale utente

Panasonic

Panasonic MC-YL637S147-AE Manuale utente

NEFF

NEFF N17XH10 0 Series Manuale utente

LG A9 Series Manuale utente

Oreck

Oreck Cordless Captura BK51700 Series Manuale utente

Kogan

Kogan KAVACROBVWA Manuale utente

Kränzle

Kränzle VENTOS 50 ID Guida utente

EVVO

EVVO Ai35 Manuale utente

DeWalt

DeWalt DWH200D Manuale utente

Pontec

Pontec Pondomatic Vacuum Cleaner Manuale utente

Cleanmaxx

Cleanmaxx PC-P007E Manuale utente

Exido

Exido 240-114 Manuale utente

RIDGID

RIDGID WD1685AU0 Manuale utente

Ezviz

Ezviz RE4P Manuale utente

STG global

STG global TANVAC HDV3000 Manuale utente

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manuale utente

Factory

Factory M3340 Manuale utente

Shop-Vac

Shop-Vac VN92 SERIES Manuale utente