Altai Technologies A8n (ac) Manuale utente
Altai Technologies Ltd. All rights reserved
Installation Guide
Version 1.2
Altai A8n (ac) Series Super WiFi
Base Station
ii
Altai Technologies Ltd. All rights reserved
Altai A8n (ac) Series Super WiFi Base Station
Installation Guide
Copyright © 2015 Altai Technologies Limited
ALL RIGHTS RESERVED.
Altai Technologies Limited
Unit 209, 2/F, Lakeside 2,
10 Science Park West Avenue,
Hong Kong Science Park,
Shatin, New Territories,
Hong Kong
Telephone: +852 3758 6000
Fax: +852 2607 4021
Web: www.altaitechnologies.com
Customer Support Centre:
Email: [email protected]
iii
Altai Technologies Ltd. All rights reserved
Altai A8n (ac) Series Super WiFi Base Station
Installation Guide
Radio Frequency Interference Requirements
This device complies with Part 15 of FCC Rules.
Operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
3. This device should not be co-located or operating in conjunction
with any other antenna or transmitter.
Interference Statement
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
FCC Caution: To assure continued compliance, (example –use only
shielded interface cables when connecting to computer or peripheral
devices). Any changes or modifications not expressly approved by the
iv
Altai Technologies Ltd. All rights reserved
Altai A8n (ac) Series Super WiFi Base Station
Installation Guide
party responsible for compliance could void the user’s authority to
operate this equipment.
Warning
The user is advised to keep apart from the base-station and antenna
with at least 45cm when the base-station is in operation.
Please install a lightning arrestor to protect the base station for lightning
dissipation during rainstorms. Lightning arrestors are mounted outside
the structure and must be grounded by means of a ground wire to the
nearest ground rod or item that is grounded.
A8n (ac) product series require professional installation. The installer
shall be responsible for ensuring that the proper 5GHz antenna is
employed so that the limits in FCC Part 15.247 are not exceeded. The
installer is responsible for ensuring that the 5GHz radio is used exclusively
for fixed, point-to-point operations.
Disclaimer
All specifications are subject to change without prior notice. Altai
Technologies assumes no responsibilities for any inaccuracies in this
document or for any obligation to update information in this
document. This document is provided for information purposes only.
Altai Technologies reserves the right to change, modify, transfer, or
otherwise revise this publication without notice.
v
Altai Technologies Ltd. All rights reserved
Altai A8n (ac) Series Super WiFi Base Station
Installation Guide
Table of contents
INTRODUCTION.................................................................................................................................. 1
A8-EIN (AC) BASE STATION MOUNTING AND OUTLOOK ....................................................................2
RESET BACK TO FACTORY DEFAULT VIA RESET BUTTON ...................................................................................... 3
A8-EIN (AC)BASE STATION MOUNTING KIT .................................................................................................. 5
MOUNTING A8-EIN (AC)ON POLE............................................................................................................... 6
A8N (AC) AND A8IN (AC) BASE STATION MOUNTING ......................................................................... 8
A8N (AC)AND A8IN (AC)BASE STATION MOUNTING KIT ................................................................................. 9
MOUNTING A8N (AC)AND A8IN (AC)ON POLE............................................................................................ 10
MOUNTING A8N (AC) 2.4GHZ ANTENNA AND CABLE CONNECTION................................................. 11
MOUNTING OF A8N (AC)2.4GHZ PANEL ANTENNA...................................................................................... 12
CABLE CONNECTION FROM A8N (AC)TO 2.4GHZ PANEL ANTENNA .................................................................. 13
RF CABLES CONNECTION AND MOUNTING OF 5GHZ RADIO ANTENNA ............................................ 15
WEATHERPROOFING A8N (AC) SERIES RADIO ANTENNA ................................................................. 16
RECOMMENDATION ON INSTALLATION POLE.................................................................................. 22
GROUNDING PROTECTION ............................................................................................................... 23
ETHERNET CONNECTOR PACKET INSTALLATION............................................................................... 24
LIGHTNING PROTECTION.................................................................................................................. 28
1
Altai A8n (ac) Series Super WiFi Base Station
Installation Guide
Altai Technologies Ltd. All rights reserved
Introduction
This guide is designed to provide the information needed to mount A8n
(ac) Series Super WiFi Base Station (BTS) at the site location. A8n (ac)
series contains 3 variants:
i) A8n (ac): contains A8n (ac) base station plus 4 external 2.4GHz
14dBi sector antennas. Each sector antenna can be adjusted
with different directions and tilt angles.
ii) A8-Ein (ac): integrated base station, multi-beam 2.4GHz 19dBi
antenna array for 80 degree sector coverage.
iii) A8in (ac): integrated base station, 14dBi antennas and RF
cabling optimized for long range 360-degree access coverage.
It is assumed in this document that a site survey has been performed
before the site installation. The appropriate antenna pole and BTS
locations have been selected. It is a good practice to have a
document consists of a map and drawing illustrating the base station
and poles locations, antenna bearing/down-tilt, antenna height, etc…
A planning on IP network is also an important issue for network
planning.
2
Altai A8n (ac) Series Super WiFi Base Station
Installation Guide
Altai Technologies Ltd. All rights reserved
A8-Ein (ac) Base Station Mounting and
Outlook
Figure 1. back-view of A8-Ein (ac)
Grounding
Screw
Locking screw
hole
Mounting screw
Ethernet Port
5GHz Port
3
Altai A8n (ac) Series Super WiFi Base Station
Installation Guide
Altai Technologies Ltd. All rights reserved
Figure 2. bottom-view of A8-Ein (ac)
Reset back to factory default via reset button
Hardware reset button have 2 functions:
Soft-reboot [equivalent to UI: Reboot).
oPress & Hold the reset button until you see Power LED blink
once
oThen release it immediately
Reset to factory default [equivalent to UI: Reset factory (NOT
retain network address)]
oPress & Hold the reset button until you see Power LED blink
once
oContinue pressing the button until you see Power LED blink
twice consecutively
oThen release it immediately
Blink twice
Blink once
Press&Hold
Release here
trigger
Soft-reboot
Release here
trigger
Reset Factory
Time (s)
0s 1s 5s 10s
4
Altai A8n (ac) Series Super WiFi Base Station
Installation Guide
Altai Technologies Ltd. All rights reserved
The reset button’s location is shown in following.
5
Altai A8n (ac) Series Super WiFi Base Station
Installation Guide
Altai Technologies Ltd. All rights reserved
A8-Ein (ac) Base Station Mounting Kit
A Main mounting module
B Mounting back plate
C 4x mounting screw and nut
D 4x locking screw
Figure 3. A8-Ein (ac) Base Station Package
A
B
A
C
D
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Altai Technologies Accessori
