Aluratek WMQ137AM Manuale utente

3G Wireless WAN Mobile
Broadband Router
User Guide

Copyright
The contents of this publication may not be reproduced in any part or as a whole, stored,
transcribed in an information retrieval system, translated into any language, or transmitted in any
form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or
otherwise, without the prior written permission.
Trademarks
All products, company, brand names are trademarks or registered trademarks of their respective
companies. They are used for identification purpose only. Specifications are subject to be changed
without prior notice.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against radio interference in a commercial environment. This equipment can generate, use and
radiate radio frequency energy and, if not installed and used in accordance with the instructions in
this manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause interference, in which case the user, at his own
expense, will be required to take whatever measures are necessary to correct the interference.
C Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic compatibility, EN
55022/A1 Class .
FCC COMPLIANCE STATEMENT

Table of Contents
FCC Interference Statement ........................................................................................ 2
System Requirements for Configuration ................................................................. 4
1. Introduction.............................................................................................................. 5
1.1. Connections............................................................................................. 5
1.1.1. Wireless WAN Mobile Broadband Router (Rear View)......... 5
1.1.2. L Ds– Wireless WAN Mobile Broadband Router (Front View)
............................................................................................................................. 6
1.2. Features ............................................................................................................ 7
2. Configuring Wireless WAN Mobile broadband Router.................................... 8
2.1. Installation Considerations.......................................................................... 8
2.1.1. Installation Instructions- Get Start Networking .......................... 8
2.1.2. stablish WiFi Connection ............................................................. 11
2.2. Using the Configuration Menu.................................................................. 11
2.2.1. Wizard setting .................................................................................... 13
2.2.2. Advanced Setup > Basic Setting .................................................. 19
3. Troubleshooting....................................................................................................... 43
4. Technical Specifications........................................................................................ 46

Package Contents
Importance: Check your product package contents FIRST.
The Wireless WAN Mobile Broa ban Router package shoul contain the items liste
below. If any of the items are missing, please contact your reseller.
items
Description Quantity
1 Wireless WAN Mobile
Broadband Router
1
2 RJ-45 Cable 1
3 Power adapter 5V 3.0A 1
4 Quick Installation Guide 1
5 CD 1
6 Cradle set 1
7
Rubber pad and Sponge
1
Caution:
Using a power supply with a ifferent voltage rating than the one inclu e with
the Wireless WAN Mobile Broa ban Router will cause amage an voi the warranty for
this pro uct.
System Requirements for Configuration
• A compatible either 16-bit or 32-bit PCMCIA or USB 3G mo em car with service
Note:
Subject to services an service terms available from your carrier.
• Computers with Win ows, Macintosh, or Linux-base operating systems with an installe
Ethernet a apter.
• Internet Explorer version 6.0 or Netscape Navigator version 7.0 an above.
WiFi System Requirements
• A 802.11b, or 802.11g A apter

1. Introduction
The Wireless WAN Mobile Broa ban Router is a high-performance tool that supports wireless
networking at home, work, or in a public place. The Wireless WAN Mobile Broa ban Router
supports uses a Type II PC car or USB 3G mo em car , either WCDMA or EVDO an even
HSDPA as well, an supports wireless ata transfers up to 54 Mbps, an wire ata transfers up
to 100 Mbps.
The Wireless WAN Mobile Broa ban Router is compatible with in ustry security features.
1.1. Connections
1.1.1. Wireless WAN Mobile Broadband Router (Rear View)
Note:
Contains a reset button to restore the setting back to original factory defaulted setting as if
your convenience of forgetting your applicable setting
Antenna
Auto MDI/MDIX RJ-45 Ports
Automatically sense the types of WAN
an LAN when connecting to Ethernet
Receptor for
Power a apter
Reset Button
Restore to Original
factory efaulte setting
USB port for connecting
with 3G USB mo em

1.1.2. L Ds– 3G Wireless WAN Mobile Broadband Router
(Front View)
3G Status LED
A green light as
power is on an
rea y
LAN LED
A green light as connecte
to local Ethernet an blinks
uring ata is transmission
WAN LED
A green light as
WAN is connecte
WiFi LED
A green light as
connection on
WLAN available
Type II PC car slot
Insert the 3G PC
car as 3G WAN
connection is
nee e

1.2. Features
Automatic take over back up with 3G connection as Ethernet WAN failover.
Implementation within 3 minutes allows the network to go where wires cannot go –
even outsi e the home or office.
Fully compatible with the 802.11g stan ar to provi e a wireless ata transfer rate of
up to 54Mbps.
Backwar s compatible with the 802.11b stan ar to provi e a wireless ata rate of up
to 11Mbps.
Utilizes
OFDM
technology (
O
rthogonal
F
requency
D
ivision
M
ultiplexing).
User-frien ly configuration an iagnostic utilities.
Operates in the 2.4GHz frequency range.
A vance Firewall features.
Supports NAT with VPN pass-through, provi ing a e security.
MAC Filtering
IP Filtering
Port Sche uling
DHCP server enables all networke computers to automatically receive IP a resses.
Web-base interface for Managing an Configuring.
Access Control to manage users on the network.
Supports special applications that require multiple connections.
Equippe with 2*10/100 Ethernet ports, for LAN an WAN access, an a Type II PC
car ( for both 16-Bit an 32Bit )Slot an USB port for 3G network connection.
Connects multiple computers to a Broa ban either WCDMA or EV-DO even
HSDPA mo em to share the Internet connection.
Note:
The Wireless WAN Mobile Broa ban Router is esigne to work with either EVDO
or WCDMA (UMTS) even up to 3.5G HSDPA PC car s.
Please refer to your service provi er for etaile feature information.

2. Configuring Wireless WAN Mobile broadband Router
2.1. Installation Considerations
The Wireless WAN Mobile Broa ban Router allows you access your network using a
wireless connection, from virtually anywhere within its operating range. Keep in min
however, that the number, thickness, an location of walls, ceilings, or other objects that the
wireless signals must pass through, may limit this range.
Typical ranges vary epen ing on the types of materials use , an backgroun RF (ra io
frequency) noise in your home or business.
To maximize your wireless range, please follow these gui elines:
1. Keep the number of walls an ceilings between the Wireless WAN Mobile Broa ban
Router an other network evices to a minimum. Each wall or ceiling can re uce the
Wireless WAN Mobile Broa ban Router’s range from 3-90 feet (1-30 meters).
Note:
The same consi erations apply to your broa ban EVDO connection.
2. Keep your pro uct aware from electrical evices (such as microwaves, air con itioners,
an televisions) that emit large quantities of RFI (Ra io Frequency Interference).
2.1.1. Installation Instructions- Get Start Networking
Connect the Wireless Router to Your Network
Note:
DO NOT connect Wireless WAN Mobile Broadband Router to power before
performing the installation steps below.
1. Attach the antenna.---picture 2.1
Picture 2.1
a. Remove the antenna from its plastic wrapper.
b. Screw the antenna in a clockwise irection to the back panel of the unit.
c. Once secure , position the antenna upwar at its connecting joint. This will
ensure optimal reception.

2. Connect a compatible Type II 3G car s or USB mo em with service to the Wireless
WAN Mobile Broa ban Router in one of the following ways:
- Insert your wireless Type II 3G car (either 16-bit or 32-bit ) into the WAN
PCMCIA Car Slot or you can plug your USB mo em into the USB
interface.---see Picture 2.2
Picture 2.2
Note:
The Wireless WAN Mobile Broa ban Router is esigne to work with
either UMTS or EV-DO an even HSDPA 3G car that can be use as a mo em
(support tethere ata). Please refer to your service provi er for etaile feature
information.
3. Insert the Ethernet patch cable into LAN Port on the back panel of the Wireless
WAN Mobile Broa ban Router, an an available Ethernet port on the network
a apter in the computer you will use to configure the unit.-see Picture 2.
Picture 2.
Note:
The Wireless WAN Mobile Broa ban Router LAN Port is
“Auto-MDI/MDIX.” This provi es patch Ethernet cable LAN Port access.

4. Connect the power a apter to the receptor on the back panel of your Wireless WAN
Mobile Broa ban Router. Then plug the other en of the power a apter into a wall
outlet or power strip.---Picture 2.4
Picture 2.4
a. The Power LED will turn ON to in icate power has been applie .
b. Other LEDs will flash ON an OFF as the Wireless WAN Mobile Broa ban
Router performs initialization an Internet connection processes. This will take a
few minutes.
c. When complete, the following LEDs will illuminate green: M1, WAN, LAN, an
WiFi
Altri manuali per WMQ137AM
3
Indice
Altri manuali Aluratek Router wireless


















