Ambiance Pc14ss Manuale utente

#2 January 2016

ANS Z83.26-2014 • CSA 2.37-2014 Gas-Fired Outdoor Infrared Patio Heaters

DANGER

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flame.

3. If odor continues, keep away from the appliance

and immediately call your gas supplier or fire

department.

DANGER CARBON MONOXIDE HAZARD

This appliance can produce

carbon monoxide which has

no odor. Using it in an enclosed

space can kill you. Never use this

appliance in an enclosed space

such as a camper, tent, car or

home.

WARNING

Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any other

appliance. An LP-cylinder not connected for use shall

not be stored in the vicinity of this or any other

appliance.

WARNING

Improper installation, adjustment, alteration, service

or maintenance can cause property damage, injury or

death. Read the installation, operation and

maintenance instructions thoroughly before installing

or servicing this equipment.

WARNING: For Outdoor Use Only

WARNING-California Proposition 65-The

burning of gas cooking or heating fuels (and certain

components contained in this product) generates some by

products which are on a list of substances known by the

State of California to cause cancer or reproductive harm.

California law requires businesses to warn customers of

potential exposure to such substances. To minimize

exposure tosuch substances always operate this appliance

in accordance with our Use & Care Guide (Owner’s Manual )

ensuring you provide good ventilation when cooking with

gas. For detailed information please see official California

Proposition 65 website www.P65WARNINGS.CA.GOV

PACKAGE CONTENTS

PART

DESCRIPTION

QUANTITY

Reflector

Emitter Grid

Glass Tube Fixer

Top Plate

Upper Support (Long)

Protective Guard

Glass Tube

Side Panel

Black Silicone Ring

Mid Support Plates

Control Box Assembly

Lower Support (Short)

PART

DESCRIPTION

QUANTITY

Block Belt

Gas Hose & Regulator

Wheel Assembly

Bottom plate

Front Control Access Panel

Ceramic Fiber

Reflector

Emitter Grid

Upper Support (Long)

Protective Guard

Top Plate

Glass Tube Fixer

Glass Tube

Side Panel

Black Silicone Ring

Front Control Access Panel

Ceramic Fiber

Bottom plate

Ambiance parts are specifically designed for our units.

Please DO NOT attempt to use Ambiance parts on

other products.

Wheel Assembly

Block Belt

Lower Support (Short)

Gas Hose & Regulator

Control Box Assembly

Mid Support Plates

HARDWARE CONTENTS (shown actual size)

SAFETY INFORMATION

This manual contains important information about the assembly, operation and maintenance of

this Fire Feature. General safety information is presented in these first few pages and is also

located throughout the manual. Keep this manual for future reference and to educate new users

of this product. This manual should be read in conjunction with the labeling on the product. Safety

precautions are essential when any mechanical or propane fueled equipment is involved. These

precautions are necessary when using, storing, and servicing this patio heater. Using this equipment

with the respect and caution demanded will reduce the possibilities of personal injury or property

damage. The following symbols shown below are used extensively throughout this manual. Always

follow these precautions, as they are essential when using any mechanical or fueled equipment.

DANGER

DANGER indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

DANGER

Failure to comply with the precautions and

instructions provided with this fire feature can result in

death, serious bodily injury and property loss or

damage from hazards of fire, explosion, burn,

asphyxiation, and/or carbon monoxide poisoning.

Only persons who can understand and follow the

instructions should use or service this fire feature.

DANGER CARBON MONOXIDE HAZARD

This appliance produces

carbon monoxide which has

no odor. Using it in an enclosed

space can kill you. Never use this

appliance in an enclosed space

such as a camper, tent, car or home.

AA BB

Wing nut

Qty. 3 Small Flat

Washer

Qty. 6

DD EE

M5 x 12 mm Screw

Qty. 35

M4 x 6 mm

Screw

Qty.1

Chain

Qty.1

Stud

Qty. 3

Phillips Screwdriver

Qty. 1

M6 x 12 mm Bolt

Qty. 8

FF GG II

Fixing Bracket

Qty. 3

Wrench

Qty. 1

Knob

Qty. 1

Long Stem Lighter

Qty.1

Φ4 Small Flat

Washer

Qty.1

Φ4 Spring

Washer

Qty.1

AA Battery (1.5 V)

Qty.1

•EXPLOSION - FIRE HAZARD

•Keep solid combustibles, such as building

materials, paper or cardboard, a safe distance away

from the fire feature as recommended by the

instructions.

•Provide adequate clearances around air

openings into the combustion chamber.

•Never use the fire feature in spaces which do or may

contain volatile or airborne combustibles, or products

such as gasoline, solvents, paint thinner, dust

particles or unknown chemicals.

•During operation, this product can be a source of

ignition. Keep fire feature area clear and free from

combustible materials, gasoline, paint thinner,

cleaning solvents and other flammable vapors and

liquids. Do not use fire feature in areas with high dust

content. Minimum fire feature clearances from

combustible materials: 36" (91 cm) from the sides &

24" (61 cm) from the top.

•EXPLOSION - FIRE HAZARD

•Never store propane near high heat, open flames,

pilot lights, direct sunlight, other ignition sources or

where temperatures exceed 120 degrees F (49°C).

•Propane vapours are heavier than air and can

accumulate in low places. If you smell gas, leave

the area immediately.

•Never install or remove propane cylinder while fire

feature is lit, near flame, pilot light, other ignition sources

or while fire feature is hot to touch.

•The glass tube, emitter grid and reflector are red hot

during use and can ignite flammables too close to the

burner. Keep flammables at least 36" (91 cm) from

sides & 24" (61 cm) from top. Keep gasoline and other

flammable liquids and vapors well away from fire

feature.

•Store the propane cylinder outdoors in a well ventilated

space out of reach of children. Never store the propane

cylinder in an enclosed area (house, garage, etc.). If fire

feature is to be stored indoors, disconnect the propane

cylinder for outdoor storage.

•CARBON MONOXIDE HAZARD

•This fire feature is a combustion appliance. All

combustion appliances produce carbon monoxide

(CO) during the combustion process. This product is

designed to produce extremely minute, non-hazardous

amounts of CO if used and maintained in accordance

with all warnings and instructions. Do not block air flow

into or out of the fire feature.

•Carbon Monoxide (CO) poisoning produces flu-like

symptoms, watery eyes, headaches, dizziness,

fatigue and possibly death. You can't see it and you

can't smell it. It's an invisible killer. If these symptoms

are present during operation of this product, get fresh

air immediately!

•For outdoor use only.

•Never use inside house, or other

unventilated or enclosed areas.

•This fire feature consumes air (oxygen). Do not

use in unventilated or enclosed areas to avoid

endangering your life.

SERVICE SAFETY

•Keep all connections and fittings clean. Make sure

propane cylinder valve outlet is clean.

•During set up, check all connections and fittings for

leaks using soapy water. Never use a flame.

•Use as a heating appliance only. Never alter in any

way or use with any device.

CAUTION indicates an imminently hazardous

situation which, if not avoided, may result in minor or

moderate personal injury, or property damage.

An appliance may be installed with shelter no

more inclusive than:

(a) With walls on all sides, but with no overhead cover.

(b) Within a partial enclosure which includes an

overhead cover and no more than two side walls. These

side walls may be parallel, as in a breezeway, or at right

angles to each other.

overhead cover and three side walls, as long as 30

percent or more of the horizontal periphery of the

enclosure is permanently open.

DANGER

CAUTION

SAFETY INFORMATION

WARNING

SAFETY INFORMATION

WARNING

WARNING: This product contains small batteries.

Swallowed small batteries can cause CHOKING

HAZARD. Seek immediate medical attention if batteries

are swallowed or inhaled. Keep children away from the

small batteries.

Adjustable or ¾” open end wrench.

Step one may be easiest if done on a table. 1-1 1-2

1-3

1-1. Unscrew the switch button, load small

battery, tighten the switch button.

1-2. Install the gas hose (M) to the gas

connector on the control box (J), Tighten it.

These are FLARE fittings and are designed to

make a sealed connection when firmly tightened.

Please do not apply sealing compound or tape

at this connection.

1-3.Insert the hoods of Bottom Plate (O) to the

lower holes of the three Lower Supports (K)

Insert the hoods of Control Box Assembly (J) to

the upper holes of the three lower support (K).

Secure with 3 (DD) M5 X 12MM Screw.

IMPORTANT NOTE: Make sure to align the side

of Bottom Plate (O) with the holes (to

accommodate Front Tank Control Access Panel)

with the side of Control Box Assembly (J) with

the magnet and control knob.

2. Insert three Upper Supports (E) to the three

Lower Supports (K). Please note: be sure

that the Upper Support (E) slide down

completely into the Lower Supports (K) before

attempting to install screws.

If you have purchased the STAINLESS STEEL

version of this appliance, now would a good

time to remove all of the plastic film protection

from all pieces and panels.

Note… Bottom Plate with tank retention

hole has folded edges facing up.

ASSEMBLY INSTRUCTIONS

AA Battery (1.5 V)

3.Use Phillips screwdriver (LL) to fasten the

Control Box Assembly (J) and the Bottom

Plate (O) with M5 x 12 mm screws (DD).

PLEASE NOTE: The bottom plate must

have the slots facing the same way as the

CONTROL KNOB.

4.Use Phillips screwdriver (LL) to secure the

Top Plate (D) to the Upper Supports (E) with

M5 x 12 mm screws (DD).

ASSEMBLY INSTRUCTIONS

Hardware Used

x 6

Phillips

Screwdriver

M5 x 12 mm Screw

x 1

Hardware Used

x 9

Phillips

Screwdriver

M5 x 12 mm Screw

x 1

ASSEMBLY INSTRUCTIONS

Hardware Used

5.Using wrench (KK) to assemble the Wheel

Assembly (N) to the Bottom Plate (O) with

M6 x 12 mm bolts (EE).

x 2

Phillips

Screwdriver

M5 x 12 mm Screw

x 1

Hardware Used

x 8

Wrench

M6 x 12 mm Bolt

x 1

6. Use Phillips screwdriver (LL) to secure the

Block Belt (L) to the Lower Supports (K) with

M5 x 12 mm screws (DD).

ASSEMBLY INSTRUCTIONS

After the Glass Tube (G) is installed, be

sure to wipe off all fingerprints with a

clean, dry cloth.

Hardware Used

DD x 3

M5 x 12 mm Screw

LL Phillips

Screwdriver x 1

8. SECURING GLASS TUBE TO TOP PLATE

Insert the Ceramic Fiber (Q) to the Quartz Tube

Fixer (C) as pictured above. Flip this assembly.

Press the glass tube fixer to the glass tube.

Use Phillips screwdriver (LL) to secure

the Glass Tube Fixer (C) to the Top Plate (D)

with M5 x 12 mm screws (DD).

7. Carefully install the Glass Tube through

top of plate (D) then secure Black Silicone

Ring (I) to bottom of Glass Tube and

seat Glass Tube with Black Silicone Ring

over orifice in burner.

Black Silicone

Ring (I) on

Glass Tube (G) BLACK

SILICONE

RING

ASSEMBLY INSTRUCTIONS

Hardware Used

10. Use Phillips screwdriver (LL) to install Side

Panels (H) to bottom of assembly with

M5 x 12 mm screws (DD).

Note: Do not cover the panel where the

knob is.

x 12

Phillips

Screwdriver

M5 x 12 mm Screw

x 1

Hardware Used

FF x 3

x 3

x 1

Fixing Bracket

LL Phillips

Screwdriver

M5 x 12 mm Screw

9. Assemble the Protective Guard and Emitter

Grid by inserting the hooks of Protective

Guard (F) to the holes of Upper Supports (E).

Put the Emitter Grid (B) on the Top Plate (D).

Make sure the screw holes align the holes of

Top Plate (D). Once aligned, hold each of 3

Fixing Brackets (FF) in place and use Phillips

screwdriver (LL) to secure the Emitter Grid (B)

and Protective Guard (F) to the Top Plate (D)

with M5 x 12 mm screws (DD) and Fixing

Bracket (FF).

Altri manuali per pc14ss

Indice

Altri manuali ambiance Stufa

ambiance

ambiance pc14ss Manuale utente

ambiance

ambiance pc14ss Manuale utente

Manuali Stufa popolari di altre marche

oventrop

oventrop Regucor Series Manuale utente

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuale utente

ELMEKO

ELMEKO ML 150 Manuale utente

BN Thermic

BN Thermic 830T Manuale utente

KING

KING K Series Guida

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guida rapida

Well Straler

Well Straler RC-16B Manuale utente

EUROM

EUROM 333299 Manuale utente

Heylo

Heylo K 170 Manuale utente

Eterna

Eterna TR70W Manuale utente

Clarke

Clarke GRH15 Manuale di istruzioni

IRSAP

IRSAP The Radiator Company Ovali Manuale utente

Empire Heating Systems

Empire Heating Systems WCC65 Manuale utente

Wetekom

Wetekom 92 86 43 Manuale utente

Desa

Desa SPC170-F Manuale utente

Watlow

Watlow Watrod Electric Tubular Heaters Manuale utente

Haverland

Haverland ECO-DRY GPS Series Manuale elenco delle parti

Stelpro

Stelpro ASILVC2060 Series Manuale utente