User manual-amc i-M15a_G
Page 7 of 12
PN: 21-i-M15a_IM
mode, the i-M15a will shut down
automatically 5 minutes after the
power adaptor is removed. This
power saving feature will save the
power of battery.
2. ON/OFF Button (Monitor Power
On / Standby)
This is a toggle switch. It will work
when power adaptor is plugged into
i-M15a or Battery power is turned
ON when power adaptor is not
plugged into i-M15a.
When i-M15a is “Standby (OFF)”,
you can press the button to turn i-
M15a to ON. When i-M15a is “OFF” ,
you can press the button to turn i-
M15a to “Standby (OFF)”
3. CH ▲(Channel Up)
By pressing the CH ▲button the i-
M15a will send control signal through
802.11a to give command to
equipment received the control
signal with “Channel Up” command
specified.
4. CH ▼(Channel Down)
By pressing the CH ▼button the i-
M15a will send control signal through
802.11a to give command to
equipment received the control
signal with “Channel Down”
command specified.
5. VOL ▲(Volume Up)
By pressing the VOL ▲button the
Volume from L & R Speakers of i-
M15a will increase (Up).
6. VOL ▼(Volume Down)
By pressing the VOL ▼button the
Volume from L & R Speakers of i-
M15a will decrease (Down).
7. Speaker - Left
Left Speaker of i-M15a.
8. Speaker – Right
Right Speaker of i-M15a.
9. Main Power LED
The LED will turn “Green” when main
power of i-M15a is “ON”.
The LED will turn “Orange” during i-
M15a is at “Standby”
The LED will be “Off” when battery of
the i-M15a is turned “Off”
The LED will never be “Off” when
power adaptor plugged into i-M15a.
10. Battery Status LED
Green : Full Charged
Orange : Battery is Charging
Blinking Orange : Battery is low and
i-T15a will be turned off automatically.
No light : Once Battery Full Charged
the LED will turn off when i-M15a is
turned on or the power adaptor is
removed.
