Amcor HD 2000HT Manuale utente

HD 2000HT 3000HT

DEHUMIDIFIER

www.amcorgroup.com

抽濕機

除湿器

GB Instruction Manual

TC 說明書

SC 用户手册

www.amcorgroup.com

THANK YOU

DO NOT USE YOUR DEHUMIDIFIER UNDER THE FOLLOWING CONDITIONS:

• For safety reasons, read this manual carefully before operating.

• Persons who are not familiar with this manual must not use this product.

• We strongly recommend keeping this manual in a safe place for future reference.

GENERAL SAFETY

Thank you for choosing this innovative Amcor dehumidiﬁer. The instruction manual

describes the many beneﬁts and advanced features that this unique product has to

offer. Before you use your new dehumidiﬁer you should carefully read the instruc-

tions to get long lasting results from this excellent product. We suggest that you

keep the manual in a safe place for future reference.

For over 50 years, Amcor has specialised in complete indoor environment

control,manufacturing dehumidiﬁers, portable air conditioners, coolers, air puri-

ﬁers/ ionisers and aromatherapy products. These world class products incorporate

the latest technological developments and are designed to create a quality environ-

ment.

GENERAL SAFETY

HOW IT WORKS

Your Amcor dehumidiﬁer draws in air through the lower front panel onto a refriger-

ated cold grill. As the air in the room passes over the cold surface, moisture con-

denses and collects into a front loading removable high capacity 7-litre water tank.

The drier, slightly warmer air is then expelled through the front upper grill back into

the room.

The Amcor dehumidiﬁer ﬁghts condensation, mould and dampness throughout the

house.

– And it is also great for drying the laundry!

Your Amcor dehumidiﬁer may incorporate a fragrance emitter (selected models)

located on the back of the unit. When the fragrance is no longer noticeable, the

fragrance capsule should be replaced by a fresh one. To change capsules, rotate the

knob located on the back of the unit anticlockwise and insert a new capsule which

can be ordered from the Amcor help-line

SAVE ENERGY

Did you know it takes less heat to warm dry air than damp humid air!

CONTROLS

CONNECTING TO THE MAINS SUPPLY

POSITIONING YOUR DEHUMIDIFIER

Your Amcor dehumidiﬁer will begin to protect your home from the harmful effects

of excessive moisture as soon as it is turned on.

Excess moisture will travel throughout your home, in the same way that cooking

smells spread to every room in the house. For this reason, the dehumidiﬁer should

be positioned in a central and clear location so that it can draw this moist air to-

wards it from all over the home. A warm hallway or landing is an excellent position

for your dehumidiﬁer. If possible, leave interior doors partly open. Alternatively,

if you have a serious problem in one area you can begin by positioning the dehu-

midiﬁer close to this area and later moving it to a more central point. Do not place

directly against a radiator or other heat source.

For the most efﬁcient use, outside doors and windows should be kept closed when

the dehumidiﬁer is operating.

When positioning your Amcor dehumidiﬁer, ensure that it is placed on a level sur-

face clear of any obstacle that may limit the air movement.

Your Amcor dehumidiﬁer is ﬁtted with 2 front castors and 2 large integrated back

wheels for easy movement including stairs.

If you move the unit, it should ﬁrst be switched off and the water tank emptied.

A cable tidy is conveniently located at the back of the unit for storage of the cable

when the unit is not being used.

The ﬁrst time that you use the unit please ensure that it has been standing for 2

hours in an upright position before it is switched on.

Plug the unit into a properly earthed mains socket.

Your Amcor dehumidiﬁer is now ready for use.

Please note, If the supply cord is damaged, it must be replaced by an approved ser-

vice representative or a similar qualiﬁed person in order to avoid a hazard.

IMPORTANT: THIS UNIT SHOULD NOT BE USED AT TEMPERATURES BELOW

5°C

CONTROLS

CONNECTING TO THE MAINS SUPPLY

POSITIONING YOUR DEHUMIDIFIER

Control Panel Indicator:

1. POWER: indicating if the compressor is running- it will go off when in defrost

mode and when the unit has achieved the requested relative humidity level.

2. TIMER: timer indication – to show that either the start or the stop or both tim-

ers are set.

3. High speed fan

4. Low speed fan

5. Humidity requested: display shows the selected relative humidity level

6. CONT: continuous, display shows that the unit will run without considering the

air’s relative humidity

7. WATER FULL: water full indication, advises when it is time to empty the water

tank

8. HEAT indicator: visual display that the heater is on

9. LED: relative humidity indicator

10. Clock

11. OFF: timer “off” indicator

12. ON: timer “on” indicator

Control Buttons

ON/OFF _ SPEED _ HEAT _ SET _TIMER _ UP _ DOWN

When buttons on the control panel are pressed, a beeping sound will be heard .

ON/OFF button

Switches the unit on or off, while the compressor is running, the POWER light [1] is

on.

Fan SPEED Control

The Amcor dehumidiﬁer features a two-speed fan control. Press the button marked

“SPEED” to illuminate the high fan speed indicator [3] for fast operation. For qui-

eter operation press the” SPEED” button to illuminate the low indicator [4].

Relative Humidity Setting

By depressing button “UP or DOWN” repeatedly you can choose from a range of

relative humidity settings:

CONT [6] _ 50% [5] _ 60% [5] _ 70% [5] _ 80% [5]

Generally we feel most comfortable when the setting is 50%-60%. Select your pre-

ferred humidity level and the unit will run until the moisture in the room reaches

the desired level. From then on it will cycle on and off to maintain the level chosen.

If “CONT.” is selected [6], the dehumidiﬁer will run continuously irrespective of

how dry the air becomes.

The digital display indicates the actual relative humidity level in the air. In most

cases you will see a reduction in condensation within a few days. In severe cases,

however, it may take several weeks to remove sufﬁcient moisture to obtain an ac-

ceptable humidity level.

HEAT button

The 800W fan heater, activated by depressing the HEAT button, only runs with high

fan speed. The HEAT indicator [8] will come on when the heater is operating.

To activate the heater without dehumidiﬁcation select 80% RH as explained above

and then press the heat button. The compressor will stop (power light 1 will go off)

and the heater only will run with high speed fan.

The heater should not be used in room temperatures above 21˚C. Above 25 ˚C the

heater will automatically cut off.

The unit will discharge warm dry air from the top grill making it effective in drying

damp items e.g. clothes in the area.

To avoid possible heat damage to fabric leave at least 1 m gap around the unit.

Garments must not be dried on top of this unit; this will restrict the air ﬂow, cause

damage to the unit/ fabric and present a risk of ﬁre / electrical shock.

Programming the 24 hour clock.

A 4 digit LED display will constantly indicate the real time.

The real time setting procedure:

Press the “SET” button for 2 seconds. The 2 digits on the left of the display [10] will

blink indicating it is now possible to change the hours setting on the clock.

Repeatedly press the “UP” or “DOWN” button until the correct hour is shown.

Press the SET” button for the second time until the 2 right digits in the 4 digit

display [10] blink indicating it is now possible to change the minutes setting on the

clock.

Repeatedly press the “UP” or “DOWN” button until the correct minute(s) is

shown.

Press the “SET” button for the third time.

The current time is set, the 4 digit display indicates the time constantly until the

Time button [11] is pressed to program the timer.

Programming the Timer – when the machine is OFF

Please familiarise yourself with this sequence before setting the timer. Long delays

in the sequence of setting will cause the timer to revert back to the 24 hour clock

display. This will then involve starting the sequence again from the beginning.

Press the “TIMER” button when the unit is off.

The 2 digits to the left of the 4 digit display – the hours - will blink indicating it is

possible to change the hours setting on the timer. Additionally the word ON will be

shown alongside the digits.

Repeatedly press the “UP” or “DOWN” button until the desired hour is shown on

the timer.

Press the “TIMER” button again.

The 2 digits to the right of the 4 digit display – the minutes - will blink indicating it

is possible to change the minutes setting on the timer. Additionally the word ON

will be shown alongside the digits.

Repeatedly press the “UP” or “DOWN” button until the desired minutes are shown

on the timer.

AT THIS POINT YOU HAVE TWO OPTIONS EITHER

1. Press “SET” and the unit will switch on at the desired time and remain ON.

It will switch on at the setting that was last used. The Timer Light will illuminate.

OR ALTERNATIVELY TO SET THE “OFF” TIME

2. Press the “TIMER” button again and the 2 digits to the left of the 4 digit display

will blink indicating it is possible to change the hours setting on the timer. Ad-

ditionally the word OFF will be shown alongside the digits. Follow the proce-

dure for setting the “ON” timer but this time set the “OFF” timer. When this is

complete press “SET”. The Timer Light will illuminate. The unit will now switch

both ON and OFF at the times set.

In both cases the clock will revert, within 10 seconds to show the real time and a

small clock graphic will appear in the window to show the timer is set.

Pressing either the “TIMER” or “SET” button at any time after the timer has been

set will cancel the settings.

Programming the Timer – when the machine is ON

The timer can be set in exactly the same way as described above. The only differ-

ence is that the ﬁrst timer to be set will be the “OFF” timer. Then again.

YOU HAVE TWO OPTIONS EITHER

Press “SET” and the unit will switch off at the desired time and remain OFF. The

Timer Light will illuminate to show the timer is set.

OR ALTERNATIVELY

Press the “Timer” button again and the 2 digits to the left of the 4 digit display will

blink indicating it is possible to change the hours setting on the timer. Additionally

the word ON will be shown alongside the digits. Follow the procedure for setting

the “OFF” timer but this time set the “ON” timer. When this is complete press

“SET”. The Timer Light will illuminate. The unit will now switch both OFF and ON

at the times set.

In both cases the clock will revert, within 10 seconds to show the real time and a

small clock graphic will appear in the window to show the timer is set.

Pressing either the “TIMER” or “SET” button, or switching the unit off at any time

after the timer has been set will cancel the settings.

Defrost Control

Your Amcor dehumidiﬁer is equipped with an intelligent defrost system which has

an automatic de-icing mode to defrost the cold coil on which ice forms during low

temperatures or low humidity operation. The defrost system will switch the com-

pressor off and on periodically according to the condition of the cold coil and the

room air temperature. When in defrost mode the fan will operate continuously and

the power light [1] will blink.

Please remember that this dehumidiﬁer is not to be used in temperatures below

5˚C.

Continuous Drainage Option

This unit can alternatively be used with a continuous

drainage hose as follows:

• Remove the water container from the unit.

• Pull the funnel selector to the continuous drainage

position A as shown in ﬁg 1. it should be pulled

forward and clicked into position. This avoids any

leakage.

• Pull out the water stopper at the back of the water

unit (ﬁg 2) and insert a 6mm diameter (1.5mm

thick) hose over the spout.

• Place the other end of the hose in a drain, ensur-

ing that it is not twisted, folded, or otherwise likely

to obstruct the water ﬂow.

• The hose must be positioned so that there is a

gradual downward slope from the connection

point to the drain.

• Ensure that the outlet of the drainage pipe is not

under the water level in the drain.

• Replace the water container.

Note: In very cold weather conditions precautions should be taken to prevent the

drainage pipe from freezing.

To return to water tank use, push the funnel selector into position B (ﬁg1) and rein-

sert the water stopper (ﬁg 2).

Water Full Indicator [7]

When the water tank is full, the “water full” indicator light [7] will illuminate and the

unit will automatically shut off and beep repeatedly to indicate that the water tank is

full. See instructions for emptying the water tank.

The water full indicator light will also illuminate and the unit will beep if the water

tank has not been properly inserted or if it has been removed. Once the tank is emp-

tied and replaced correctly, the unit will re-start.

Emptying the Water Container

When the water container is full the water full indica-

tor light will illuminate and the unit will automatically

shut off. Wait a few minutes to allow the water to ﬁn-

ish draining into the water container. To remove the

water container, pull the lower front panel forward.

Pull out and lift the water tank by the handle and

carry it away for emptying. Gently replace the con-

tainer and close the lower front panel. When the tank

is properly inserted, both the hole and the ﬂoat

mechanism in the container will be located directly beneath the drainage spout and

the water full indicator light will go out.

Washing and changing the Filters

The Amcor dehumidiﬁer features two ﬁlters: a

replaceable activated carbon ﬁlter to remove odours

and a washable high efﬁciency dust ﬁlter to purify the

air. It is recommended to clean the washable air ﬁlter

at regular intervals depending upon how frequently

the unit is used, at least every 3 months.

To do this, ﬁrst remove the water tank. Pull down and

remove the ﬁlter-housing unit that incorporates both

ﬁlters. Push the ﬁlter locks on either side of the ﬁlter-

housing unit and remove the ﬁlter fame. Take the

carbon ﬁlter out of the housing unit. The dust ﬁlter

can then be washed under running water. It must

be dried before inserting it back into the unit. The

carbon ﬁlter cannot be washed but can be

vacuum cleaned. It is recommended to replace the carbon ﬁlter every 12 months,

depending upon how frequently the unit is used. Replace the ﬁlter frame with the

word front outside.

For replacement ﬁlters please contact the dealer or Amcor hotline number.

TECHNICAL DATA

Model No. HD2000HT HD3000HT

Mains 220-240V / 50Hz

Water extraction -at 32˚C 90%RH

-at 30˚C 70%RH

L/24hr 14 22

9 15

Water tank capacity L 7

Refrigerating agent R134A

Temperature range ˚C 5 - 35

Power consumption-Dehum W 230 370

Power consumption -Heater W 800

Max. airﬂow m3160 180

Dimensions of unit (W x H x D) mm 345 x 722 x 325

Wheel diameter mm 120

Weight kg 18 21.5

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Deumidificatore popolari di altre marche

Daitsu

Daitsu CD031IU-DFA Manuale utente

Fehom

Fehom PDGT701BE Manuale utente

Hitachi

Hitachi RD-190GX Manuale utente

Westpoint

Westpoint MDF1-30AE Manuale utente

SOLIS

SOLIS easy dry compact Manuale utente

ENVIROBOSS

ENVIROBOSS EB240 Manuale utente

Sinclair

Sinclair R-9112 Manuale utente

Kenmore

Kenmore 580.54701 Manuale utente

Demargo

Demargo DM828NF Manuale utente

Altrad Lescha

Altrad Lescha LDH 600 Manuale utente

BOMANN

BOMANN LE 1150 CB Manuale utente

SPT

SPT SD-46 Manuale utente

REMKO

REMKO SLN 40 Manuale utente

Haier

Haier HD458 Manuale utente

Logik

Logik L20DHW12 Manuale utente

Frigidaire

Frigidaire FDR30S1 - 30 Pint Capacity Dehumidifier Guida rapida

Blitz

Blitz HHD Series Manuale utente

Prem-I-Air

Prem-I-Air PD14DEN Manuale utente