EXTERNAL SWITCH OPERATION:
PARTNER/PLUS STEPPER comes fully equipped for external switch operation. The switch jack on the back of the unit corresponds to the
message panel of the PARTNER/PLUS STEPPER. The switch jack operates as a switch closure to operate a low voltage electronic device such
as a Toy or an Environmental Control Unit (ECU), Computer Interface or a delay timer.
PLAYBACK OPERATION:
1. Turn the PARTNER/PLUS STEPPER ON. Turn the VOLUME control switch to the left, until it clicks ON.
2. Set the VOLUME control, turning to the left, until the desired playback volume is reached.
3. Press the message panel on the face of the PARTNER/PLUS STEPPER and the message will play.
4. Each time the panel is pressed, the PARTNER/PLUS STEPPER advances to the next message in the sequence.
5. Pressing the RESET button next to the RECORDING button will start the sequence back at the first message recorded from any where
in the sequence.
OVERLAY DESIGN AND LAYOUT:
There are several methods you can use to make overlays for the PARTNER/PLUS STEPPER.
1. Draw or print corresponding icons or words on a sheet of 4” by 4” paper.
2. Develop your custom overlay using our Overlay Designer program.
Limited Warranty
How do you register your Partner/Plus Stepper to get warranty coverage?
Do all the following within 30 days after the date of purchase: completely fill out the Warranty Registration Card included; then detach it and
mail it in, along with a copy of your dated sales receipt, to: Advanced Multimedia Devices, Inc., 95 Sherwood Ave., Farmingdale, NY 11735. If
you do not include your sales receipt, the warranty will be effective as of the original factory shipping date, as determined by the records of
Advanced Multimedia Devices, Inc. (the “Company”). You can also register online.
What does this warranty cover?
The Company warrants that during the warranty period, the Partner/Plus Stepper will be free from defects in material and workmanship, and will
comply with the Company’s published specifications. This warranty only covers the product that is owned, registered, and submitted for warranty
service by the original retail purchaser (“You”, the customer). This warranty is immediately void if any installations, repairs, modifications, or
alterations are performed on the Partner/Plus Steppers by anyone other then the Company or its Authorized Service Representative. The term
“alterations” includes, but is not limited to, the addition or attachment of any non-Company equipment to the Partner/Plus Stepper.
What does this warranty NOT cover?
Product acquired from any source other than the Company or one of its Representative;
Product that was not properly registered for warranty coverage;
Product that has been installed, repaired, modified or altered by anyone other than the Company or its Authorized Service Representative;
Product that the serial number or the Company label, trademark or other markings have been removed, altered, concealed or obliterated in
whole or in part;
Expendable components, including but not limited to batteries and the changing of batteries;
Any product failure or defects caused by misuse, physical abuse, failure to keep the product clean, abnormal or unusual handling, or neglect
(all of which shall be determined by the Company’s sole judgment);
Incidental damages (which include, but not limited to, loss of use, replacement costs during the time the product may not work and the costs
of shipping the product to and from the Company or its Authorized Service Representative for warranty service) and;
Consequential damages (the cost of repairing or replacing other property which was damaged when you used this product, or when this
product did not work properly).
What is the period of warranty coverage?
This warranty remains in force for 1 year from the date of purchase by the original retail purchaser. The date of purchase is indicated on your
sales receipt.
What will we do to correct problems?
The Company, at is option, will refund your purchase price, repair or replace any parts necessary to correct defects in the materials or
workmanship, or replace the product with the same model or a substantially similar model.
How do you get warranty service?
If the product requires and qualifies for warranty service, call AMDi @ 1-888-353-AMDi for RMA number, then ship the product prepaid to:
AMDi., Service Department, 95 Sherwood Ave., Farmingdale, N.Y. 11735. Be sure to include a letter with your Name, Address, Telephone
number and an explanation of the problem.
This is an exclusive warranty.
This warranty is complete and exclusive. In no event shall the Company be liable for special, incidental, or consequential damages arising out of
the purchase or use of this product, whether in contract, tort, or negligence. There are no warranties, which extend beyond the description of the
face hereof. THE WARRANTIES REFERRED TO HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. The Company’s maximum liability to you, or to anyone claiming through or on the behalf of you, shall not exceed the amount you
paid for the product. No liability shall arise from the Company rendering any advice or providing any information to you. Your continued use of
possession of this product after the expiration of the warranty period should be conclusive evidence that the warranty is fulfilled to your full
satisfaction.
95 Sherwood Avenue Phone: (631) 531-8888 1-888-353-2634
Farmingdale, NY 11735 Fax: (631) 531-8811 http://www.admi.net
