Ameba SD-436R Manuale utente
SD-436R
USER’S MANUAL
VER. : 1.0 2012
1
Table of Contents
1
Precautions….
………………………………………………………… 2
2 Features……...
………………………………………………………… 3
2.1 Built-in Decoder………………………………………………….. 3
2.2 Integrated Universal Speed Change Rotator…………………3
2.3 Built-in High Definition Color Camera……………………….. 3
2.4 All-weather Outdoor Design…………………………………… 3
3 Technical Data
……………………………………………………….… 4
3.1 Technical Parameters of the High-speed Dome…………… 4
4 Installation Guide…………….
…………………………………….. 5
4.1 Installation Preparation…………………………………………. 5
4.2 Structure…………………………………………………………… 5
4.3 Installation Size…………………………………………………… 6
4.4 Installation Procedures…………………………………………. 6
5Settings…………………
……………………………………….….… 8
5.1 Interface…………………………………………………………… 8
5.2 Dome Address, Transmission Speed, Protocol Setting….. 9
6 The OSD Menu Setting……………………
…………………….. 11
6.1 Operations Method of the Menu……………………………… 11
6.2 OSD Menu Tree………..…………………………………………. 13
7 Trouble Shooting…
…………………………………………………… 26
2
1 Precaution
1. Transportation Security
No heavy stress, violent vibration or water splash are allowed during transportation, storage. The
unit should be transported in separated packing. In shipments of distributor and delivery of
maintenance, any damages caused by integral packing are not covered by warranty.
2. Installation
Avoid heavy stress and violent vibration during installation. Don’t touch the dome cover directly
by hand. When connecting the power source, please follow all electric safety standards and only
use the power supply designated for this device. Keep the video and control signal in a decent
distance from high voltage devices and cable. Don’t apply power to the dome before finishing the
installation.
3.Dismantlement
Please don’t dismantle the devices in the dome body. Only the professional personnel authorized
can operate the maintenance.
4. Internal Environment
Keep metal and inflammable material away from dome body to avoid fire, short circuit and
damage. Please prevent all liquids material from entering the dome. If occur this, please shut
down the power and pull out the plug. Then inform the technical personnel immediately.
5. Electrical Safety
The video image would be interfered when the dome is installed near television, radio transmitter,
voltage changer and audio amplifier.
6. Camera Protection
Avoid shooting very bright objects directly into the camera’s CCD (such as the sun or light
fittings).
7. Cleaning Method
Please don’t use abrasive and violent detergent to clean the dome. Please choose dry fabric and
neutral detergent. Use lens paper to clean the lens.
3
2 Features
2.1Built-in Decoder
● Power-off protection, no data loss
● 220 programmable presets
● 8 cruising tracks, each cruising track has 32 preset positions
● 8 pattern tours, each one with 180s memory
● RS-485 bus
● 8 groups of auto scan, the left and right boundary and scan speed can be set
● Pelco_P and Pelco_D compatible
● 6 alarm inputs and 2 outputs
● Message display function, lens coordinate value, temperature and alarm information can be
showed
● Guard location, the dome can operate preset, auto scan, cruising and pattern tours functions
after a short pause
● Alarm triggering, the alarm can trigger preset, auto scan, cruising and pattern tours functions
2.2Integrated Universal Speed Change Rotator
● Delicate stepping motor, stable, sensitive and accurate
● 360°
°°
°continuous pan without blind area
● Stepless speed change, auto zoom/speed matching
● Auto overturn function
● Manual speed: Pan: 0.01°
°°
°- 300°
°°
°/S, Tilt: 0.01°
°°
°- 150°
°°
°/S
● Presets calling speed: 500°
°°
°/S
2.3Built-in High Definition Day/Night Camera
● Auto iris, auto back light compensation
● Auto/manual white balance
● Auto/manual focus
● Auto/manual brightness control
● 520/530TV line
● Multiple kinds of camera for options
2.4All-weather Outdoor Design
● Built-in heater
● Built-in fan, can operate in 60℃
℃℃
℃
● High Die-cast Aluminum Construction
● IP66 water proof
●
●●
●3000V lightning and surge current proof
4
3 Technical Data
3.1 Technical Parameters of the High-speed Dome
Model SD-436R
Power Supply AC24V/2.5A
Operating Temperature -35 °C —
——
—60°C
Operating moisture < 95%
Power Consumption 50W
Communication RS-485 bus,
Communication transmission speed 2400/4800/9600BPS
Protocols Pelco-D, Pelco-P Compatible
Pan Rotation 0.01°-300°/s
Tilt Rotation 0.01°-150°/s
Pan/Tilt Accuracy +/- 0.07°
Preset Speed 500°/s
Pan Angle 360°Continuously
Tilt Angle 90°
Size 364 x 350 x 202mm
Weight 5.6kg
Preset Positions 220
Auto Scan 8 Groups
Cruise Track 8 Groups
Cruise Points Qty per cruise group 32 Preset Positions
Pattern Tours 8 Groups
Alarm 6 alarm inputs and 2 outputs
Privacy Zone 8 zones (depend on camera module)
Protection IP66 water proof/3000V lightning proof
Fan, Heater Fan and heater auto-starts 24VAC
5
Camera Module Specification
Items SD-436R
Image Sensor 1/4" SONY Super HAD II (Double Scan)CCD
Picture Elements NTSC:768(H)x494(V)/PAL:752x582(V)
Resolution 700 TV Line(Max)
Video Output 1Vp-p Composite Video(75Ω)
SYNC System Internal/External (V-Lock)
Lens 3.4mm~122.4mm, 1.6~F4.5
Zoom 1152X, 36X Optical,32X Digital
S/N Ratio 50dB
Mini. Illumination
Color :0.5lux
B/W:0.2lux
Color DSS:0.001lux
B/W DSS:0.0004lux
White Balance ATW/Indoor/Outdoor/Manual/AWB/One Push WB
Gain ON/OFF (30dB Max)
4 Installation Guide
4.1 Installation Preparation
Video Coaxial Cables
Mode Max Distance
RG59/U 750ft(229m)
RG6/U 1,000ft(305m)
RG11/U 1,500ft(457m)
6
4.2 Structure
4.3 Installation Size
7
4.4 Installation Procedures
*Notice: The wall must be thick enough to install the expansion screws and can bear 4 times the
weight of the dome camera itself.
(1) Bore 4 holes by using templates included on the wall.
(2) Mount 4 expansion screws into the holes.
(3) Put the cables through the bracket. Fix the dome base and the bracket with M6 screws
(4) Use M 8 screw-caps and shims to fix the bracket on the wall.
8
(5) Attach the dome cover to the dome base with rope.
(6) Set the dome address, system baud rate and protocol by configuring DIP switches SW1 and
SW3 located on the side of dome body. The Plug-in on the dome body must be seated rightly
with the socket on the dome base.
(7) To lock the dome body to the dome base, line up the A and B tabs on the dome body with the A
and B label on the dome base. Push in on the tabs. Insert one side and then the other side.
Continue pushing one the ends of the tabs until both sides click into place. Make sure the
plug-in on the dome body is fully locked by the socket on the dome base. Then press the
dome body lightly and check if the dome body is fully locked to avoid shedding and abrasion
9
with the dome cover.
(8) Fix the dome cover with screws.
(9)Cable Connection:
5
Settings
5.1 Interface
Indice
Altri manuali Ameba Telecamera di sicurezza
