American DJ LED OPERATOR Manuale utente

User Instructions

Rev1.0

LED OPERATOR

RECORD

TAP SYNCSTROBE

BLACKOUT

PAGE 1

PAGE 2

PAGE

LED OPERATOR

RED

COLOR PRESETS CHASES

1 12 23 34 4

5 56 67 78 8

GREEN BLUE MASTER SPEED FADE

0.1S 30S

10Min 0

Functions:

-3 Channel, RGB LED Controller

-16 Color Presets

-Power failure memory

-1-

Product layout

Technical Specifications:

Power Input.................................................................................................................DC 9V, 200mA Min

DMX Out.......................................................................................................3-pin female XLR connector

Dimension............................................................................................9.64”x7”x2.36” (245X178X60mm)

Weight...............................................................................................................................3.2lbs. (1.45kg)

1R,G,B Faders: Use R,G,B faders to manually set the intensity of each relevant color.

3Record button: Use the Record button to engage record mode and record color presets and chases.

2MASTER Fader: Use Master fader to manually control overall intensity.

4Strobe button: Use the Strobe button to trigger strobe function at any time during playback.

5TAP SYNC button: Press the Tap Sync button twice during Chase playback to set Chase speed.

Black Out button: Press the Black Out button to cut all output.

7SPEED Fader: Use the Speed fader to manually set the chase speed during playback.

8FADE Fader: Use the Fade fader to manually set the chase fade rate during playback.

RECORD

TAP SY NCSTR OBE

BLACKOUT

PAGE 1

PAGE 2

PAGE

LED indicator OPERATOR

RED

COLOR PRESETS CHASES

1 12 23 34 4

5 56 67 78 8

GREEN BLUE MASTER SPEED FADE

0.1S 30S

10Min 0

4 51 2

9PAGE 1/2 LED indicators : Indicates the active Color Preset page. When Page 1 indicator is lit,

scenes 1-8 are active. When Page 2 indicator is lit, scenes 9-16 are active.

10 PAGE button: Use this button to switch between Color Preset pages 1 and 2.

11 Color preset buttons and LED indicators 1-8: Use these buttons to trigger relevant color presets.

12 Chase buttons and LED indicators 1-8: Use these buttons to trigger relevant chase presets.

-8 Preset Chases

-Strobe Function

-Individual RGB Channel Faders

-Grand Master Fader

-Record Function to Record Colors and Chases

-Speed & Fade faders for Chase control

Color Preset and Chase Playback

1. Adjust the Red, Green, Blue & Master faders to set

a scene on the fly as desired.

You can also manually adjust the RED, GREEN and BLUE

faders to temporarily edit the current color. Adjust the fader to set the overall output intensity.

Select a by pressing buttons 1-8 in the Color Presets section. Press the

button to switch between color preset pages 1 and 2. When LED indicator illuminates, color

presets 1-8 are accessible; when LED indicator illuminates, color presets 9-16 are

accessible. When a color preset is selected, its LED indicator will continually flash. Press the same

color preset number button to disengage it.

“Color Preset” "PAGE"

"PAGE1"

"PAGE2"

"MASTER"

3. Select a " by pressing buttons 1-8 in the Chases section. When a chase is selected, its

LED indicator will flash continually. Additional chases can be selected and will playback in a sequential

fashion. When additional chases are selected, each relevant Chase LED will illuminate ON solid until

it becomes its turn to playback in the sequence. Pressing a selected chase button a second time will

disengage the relevant chase. Adjust the “MASTER” fader to set the overall output intensity.

"CHASE

Operating Instructions:

(1) Connect from your controllers DMX output to the DMX input of your first LED fixture in line.

(2) BLACKOUT mode is active by factory default. When first powering on LED Operator, the

LED indicator should be OFF.

"BLACKOUT" LED

indicator will illuminate. Press the "BLACKOUT" button once to disengage. The

(3) After the first use, LED Operator will default to its last state before being shut off.

-2-

(1) : Press and hold down the button and sequentiallyRecord Mode Enable "RECORD" press

" buttons 1, 6, 8, 1, 6, 8 then release the button. The LED indicator

will turn ON indicating that mode is engaged.

COLOR PRESET" "RECORD" RECORD

RECORD

Record mode

(2) Adjust the faders to set a

as desired.

RED, GREEN, BLUE & MASTER Color

Preset/Scene

(3) Press a button that you wish to save it to. Repeat step 2 and 3 to save additional

Color Presets/Scenes.

COLOR PRESET # (1-8)

(4) Press the button twice to exit“BLACKOUT” RECORD MODE.

+Or

SPEED

0.1S

10Min

FADE

30S

Adjust the and faders to manually set a desired chase speed and fade percentage.

You can also press the button twice continually to set a desired chase speed. The

“SPEED” “FADE”

“TAP SYNC”

TAP SYNC LED will flash at the rate that it was pressed..

(1) Engage Record mode as described above.

Record Custom Color Presets

NOTE:

FACTORY CHASES WILL NOT ACCEPT FADE CONTROL. FADE CONTROL WILL ONLY WORK WITH

CUSTOM (USER CREATED) CHASES.

Up to 8 chases can be programed, each of which can store up to 20 scenes/steps. Note: When recording custom

chases, relevant factory chases will be erased.

(2) Press the # button (1-8) that you want to record to.CHASE

(5) Press the button twice to exit .BLACKOUT

Record Custom Chases

(1) Engage Record mode as described on page 3.

(3) Set your scene with faders to desired setting.RED, GREEN, BLUE & MASTER

(4) Press the button to store the step. Repeat steps 3 & 4

to store up to 20 steps/scenes per chase.

RECORD

-4-

Factory Default Reset

(1) Switch the LED Operators main power OFF.

(2)Press and hold down buttons 1, 6 & 8 then

simultaneously switch the power switch ON then release all

buttons. A

Color Preset

ll LED indicators will flash three times to confirm that

factory settings have been restored.

(3) Press the "STROBE" button again to disengage the strobe effect.

(2) At any time, you can adjust the Strobe flash rate by pressing and

holding down the "Strobe" button then manually adjusting the Speed fader.

SPEED

0.1S

10Min

The strobe function will mix with a running Color Preset or Chase. Pressing the Strobe button will temporarily

incorporate a strobe effect over a running color preset or chase.

(1) Press the "STROBE" button when effect is desired.

Strobe Function

WARNING! THIS OPERATION WILL ERASE CURRENT COLOR PRESETS AND CHASES. ALL COLOR

PRESETS AND CHASES WILL BE REPLACED WITH FACTORY COLOR PRESETS AND CHASES.

-5-

Indice

Altri manuali American DJ Attrezzatura di illuminazione

American DJ

American DJ TRI PEARL LED Manuale utente

American DJ

American DJ Pocket Scan Manuale utente

American DJ

American DJ Mega QA Par38 Manuale utente

American DJ

American DJ Spiral Scan Manuale utente

American DJ

American DJ Blade Manuale utente

American DJ

American DJ Emerald Sky Manuale utente

American DJ

American DJ Simple Scan Istruzioni per l'installazione

American DJ

American DJ RGBW4C Manuale utente

American DJ

American DJ Revo III Manuale utente

American DJ

American DJ Cluster II Manuale utente

American DJ

American DJ Warp FX Manuale utente

American DJ

American DJ LS-70 Istruzioni per l'installazione

American DJ

American DJ Tempest Manuale utente

American DJ

American DJ P64 LED Manuale utente

American DJ

American DJ MB DMX II Manuale utente

American DJ

American DJ Sparkle LED 3W Manuale utente

American DJ

American DJ LED Pixel Tube 360 Manuale

American DJ

American DJ WIFLY WLC16 Manuale utente

American DJ

American DJ DJ SCAN Manuale utente

American DJ

American DJ Dynasty Ray Istruzioni per l'installazione

American DJ

American DJ TripleFlex Manuale utente

American DJ

American DJ Mega Par Profile System Manuale utente

American DJ

American DJ Mini Tri Ball II Manuale utente

American DJ

American DJ Topaz 250 Istruzioni per l'installazione

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente