Amigo AMI-2501 Manuale utente
AMI-2501 V.92 56K
EXTERNAL MODEM
QUICK START GUIDE
P/N:PMI2501010-51
The information in this document is subject to change without notice and does not
represent a commitment on the part of the vendor.
No warranty of representation, either expressed or implied, is made with respect to the
quality, accuracy or fitness for any particular purpose of this document. The
manufacturer reserves the right to make changes to the content of this document
and/or the products associated with it at any time without obligation to notify any
person or organisation of such changes.
In no event will the manufacturer be liable for direct, indirect, special, incidental or
consequential damages arising out of the use or inability to use this product or
documentation, even if advised of the possibility of such damages.
Microsoft Windows is a trademark of Microsoft Corporation.
All product names are trademarks or registered trademarks of their respective owners.
FCC Compliance Statement
This device complies with Part 15 and 68 of the FCC Rules. Operation is subject to
the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may
cause undesired operation.
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 and 68 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can emit radio frequency energy and,
if not installed or used in accordance with the instructions, may cause interference to
radio communications. However, television reception interference can be determined
by turning the equipment off and on, the user is encouraged to correct the interference
by one or more of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the equipment and the receiver
•Connect the equipment into an outlet different from that to which the receiver is
connected
•Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
CTR-21 Compliance statement
The equipment has been approved in accordance with Council Decision 98/482/EC
for pan-European single terminal connection to the public switched telephone network
(PSTN). However, due to differences between the individual PSTNs provided in
different countries, the approval dose not, of itself, give an unconditional assurance of
successful operation on every PSTN network termination point.
In the event of problems, you should contact your equipment supplier in the first
instace.
The manufacturer should ensure that the vendor and user of the equipment is
clearly informed of the above information by means of packaging and / or user
manuals or other forms of user instructions.
The information contained in this manual has been verified at the time of this
manual’s printing. The manufacturer reserves the right to make any change and
improvement in the product described in this manual at any time and without notice.
All registered trademarks are the property of their respective owners. Copyright
©2002 All rights reserved. No reproduction of this document in any form is permitted
without prior written authorization from the manufacturer.
QuickStart
1. Installing Your Modem in Windows 95/98
Step 1.
Reboot the computer system after modem is correctly plug into your
COM Port of computer. The Windows 95/98 will automatically detect
your new modem and promote you the following dialog box to install
new driver for the modem. Click on the “NEXT” button to continue.
Step 2.
In the new dialog box, you have two choices to install a driver. The
default choice is search for the best driver for your device. Highlight this
selection if it is not already highlighted and click “NEXT”
Step 3.
A new Add New Hardware Wizard dialog box will display on the Screen.
Insert the driver CD into CD-ROM driver and highlight the “Specify a
location” and choice the “ D:\Driver\WIN9X”, then click “NEXT”
Step 4.
The below dialog box to show you the INF. File, the windows 95/98
found for the modem. Click on the NEXT button to accept the INF. File.
Then the Windows 95/98 will starts to copy all files from CD-ROM to
your PC hard disk.
Step 5.
The Windows 95/98 will display below dialog box to tell you it has
already installed the driver for the modem. Click on “Finish” button to
confirm the installation of the modem.
Step 6.
After finishing the installation of modem, the Windows 95/98 will display
dialog box to ask you providing the driver for the “Wave Device for
Voice Modem”. Then click on “Next” button to continue.
Step 7.
The Windows 95/98 will automatically detect your new Wave Device and
promote you the following dialog box to install new driver for the modem.
Click on the “Next” button to continue.
Step 8.
In the new dialog box, you have two choices to install a driver. The
default choice is search for the best driver for your device. Highlight this
selection if it is not already highlighted and click “NEXT”
Step 9.
A new Add New Hardware Wizard dialog box will display on the Screen.
Insert the driver CD into CD-ROM driver and highlight the “Specify a
location” and choice the “ D:\Driver\WIN9X”, then click “NEXT”
Step 10.
The below dialog box to show you the INF. File, the windows 95/98
found for the modem. Click on the NEXT button to accept the INF. File.
Then the Windows 95/98 will starts to copy all files from CD-ROM to
your PC hard disk.
Step 11.
The Windows 95/98 will display below dialog box to tell you it has
already installed the driver for the modem. Click on “Finish” button to
confirm the installation of the modem.
2. Installing Your Modem in Windows ME
Step 1.
Turn on your computer. As the Windows ME operating system boots up,
it displays a Add New Hardware Wizard dialog box shown on your
screen Click “Next’, then a new dialog box will show on the screen.
Step 2.
In the new dialog box, you have two choices to install a driver. Highlight
the specify the location of the device ( Advanced ) if it is not already
highlighted and click “Next” to continue.
Step 3.
A new Add New Hardware Wizard dialog box will display on the Screen.
Insert the driver CD into the CD-ROM driver and highlight the “Specify a
location” and choice the “D:\Driver\WINME”. Windows ME will copy
the files onto your hard disk.
Step 4.
The below dialog box to show you the INF. File, the windows ME found
for the modem. Click on the “Next” button to accept the INF. File. Then
Windows ME will starts to copy all files from CD-ROM to your PC hard
disk.
Indice
Altri manuali Amigo Modem
