Amit Zcomax VHG760 Guida rapida alla configurazione

The router/AP devices AMIT VHG760 and AMITVHG87B allow internet connetion via Ethernet or 3G/4G networks. Devices were tested starting

with default settings and using the Ethrernet1 port as WAN. The default SSID (on both bands 2,5 GHz and 5GHz for VHG87B) was set for SOCIFI

services, the SSID was already set including the DHCP service.

The tested VHG760 firmware version was , tested VHG87B firmware version was00000W0.I21_e21.0000_02211700 0000Y90.I21_e22.0000_03

211200. Both devices are configured equally.

1.. RADIUS and External Captive Portal

1.1 RADIUS server

Tested firmware supports only one RADIUS server

We recommend to use this set of RADIUS servers:

<br/>

List of RADIUS according to your location:

For North America

AMIT VHG760 & VHG87B Socify Integration Guide

Zcomax Technologies Limited, [email protected] , +44 20 8982 8200

For South America

For Europe and Africa

For Asia-Pacific

Go to and add new item with following settings. In "Server Type" section set only " parameters."Object Definition / External Server" Primary"

Do not set "Secondary"

Server name <According to the RADIUS selection tool above> eg. rad-1-euw-1.socifi.com

Server Type RADIUS server

Shared Key socifi

Authentication Protokol CHAP

Session Timeout 1

Idle Timeout 1

Server IP/FQDN <According to the RADIUS selection tool> eg. rad-1-euw-1.socifi.com

Server Port 1812

Accounting Port 1813

Server enable

RADIUS Server 1

rad-1-use-1.socifi.com or IP address: ,52.7.148.174 Radius shared secret: socifi

RADIUS Server 2

rad-2-euw-1.socifi.com or IP address: ,52.50.155.202 Radius shared secret: socifi

RADIUS Server 1

rad-1-sae-1.socifi.com or IP address: ,52.67.151.35 Radius shared secret: socifi

RADIUS Server 2

rad-2-euw-1.socifi.com or IP address: ,52.50.155.202 Radius shared secret: socifi

RADIUS Server 1

rad-1-euw-1.socifi.com or IP address: ,52.209.184.212 Radius shared secret: socifi

RADIUS Server 2

rad-2-euw-1.socifi.com or IP address: ,52.50.155.202 Radius shared secret: socifi

RADIUS Server 1

rad-1-aps-1.socifi.com or IP address: ,52.220.93.217 Radius shared secret: socifi

RADIUS Server 2

rad-2-euw-1.socifi.com or IP address: ,52.50.155.202 Radius shared secret: socifi

In order to have the Radius communication working fine, the IP addresses (above) and the ports 1812 Auth and 1813 Acc must be

accessible.

Zcomax Technologies Limited, [email protected] , +44 20 8982 8200

1.2 External Captive Portal

Go to and set folowing item's parameters"Object Definition / External Server"

Server Name SOCIFI CaptivePortal

Server Type UAM Server

Shared Secret <empty>

NAS/Gateway ID AMIT_<mac_addres_of_WAN_port_see_below>

Location ID <empty>

Location Name <empty>

Server IP/FQDN connect.socifi.com

Server Port 80

Server enable

2.. Authentication and External SOCIFI Captive Portal

Set Walled Garden with following domain list

socifi.com facebook.com akamaihd.net akamai.net edgecastcdn.net

twitter.com twimg.com fastly.net licdn.net cloudfront.net fbcdn.net

instagram.com cdninstagram.com linkedin.com licdn.com

Want to Allow Google+ login ?

The new does not include the . The reason is that some Android based devices Allow login through social networks Google login are not

to the Captive Portal when the user gets connected to WiFi network. In case you'd like to add it you need to do following:redirected

Check if your hotspot allows DNS names in the Walled garden. Some hotspots can use IP addresses only. See: Why DNS-based

Walled Garden (and not IP-based)

Allow Google+ login: Settings > Brand > Authentication > Allow login through social networks > Set on Allow Google login

Add these walled garden domain into existing list:

Google+ Login DNS's

For Cisco Meraki, Ruckus, Xirrus

*.googleapis.com

*.googleusercontent.com

*.gstatic.com

*.accounts.youtube.com

*.apis.google.com

*.accounts.google.com

*.l.google.com

For Open Mesh

googleapis.com,googleusercontent.com,gstatic.com,accounts.youtube.c

om,apis.google.com,accounts.google.com,l.google.com

For Mikrotik

If you are customer with , please add your custom domain (for example White Label solution mycustomdomain.com) to the Walled

Garden list.

Please adopt same format your Walled garden is already using e.g. with or without the asterisk, separated by comma or

space etc.

The local domain must be added into the Walled Garden list. For example accounts.accounts.google.XX google.co.uk for

google.com.sgUnited Kingdom, accounts. for Singapore, accounts.google.de for Germany etc. Google domains list you can

find at https://ipfs.io/ipfs/QmXoypizjW3WknFiJnKLwHCnL72vedxjQkDDP1mXWo6uco/wiki/List_of_Google_domains.html

The local domain must be added into the Walled Garden list. For example foraccounts.google.XX accounts.google.co.uk

United Kingdom, for Singapore, for Germany etc. Google domains list you canaccounts.google.com.sg accounts.google.de

find at https://ipfs.io/ipfs/QmXoypizjW3WknFiJnKLwHCnL72vedxjQkDDP1mXWo6uco/wiki/List_of_Google_domains.html

/ip hotspot walled-garden

add dst-host=*.googleapis.com

add dst-host=*.googleusercontent.com

add dst-host=*.gstatic.com

add dst-host=*.accounts.youtube.com

add dst-host=*.apis.google.com

add dst-host=*.accounts.google.com

add dst-host=*.l.google.com

add dst-host=accounts.google.com

For DD-WRT

googleapis.com googleusercontent.com gstatic.com

accounts.youtube.com apis.google.com accounts.google.com

l.google.com

The Splash Page is not triggered when Android devices connect to WiFi

Set External Captive redirection in with following values."Security / Authentication"

Captive Portal enable

WAN Interface <relevant WAn interface> WAN-1 by default

LAN Subnet <LAN subnet according to the DHCP server>

Web Portal External

MAC Whitelist

Walled-Garden Hosts

Walled-Garden domain <see above>

Authentication Server <select RADIUS Server Name> eg.. rad-1-euw-1.socifi.com

UAM Server enable

Select from external Server List SOCIFI CaptivePortal

The local domain must be added into the Walled Garden list. For example foraccounts.google.XX accounts.google.co.uk

United Kingdom, for Singapore, for Germany etc. Google domains list you canaccounts.google.com.sg accounts.google.de

find at https://ipfs.io/ipfs/QmXoypizjW3WknFiJnKLwHCnL72vedxjQkDDP1mXWo6uco/wiki/List_of_Google_domains.html

The local domain must be added into the Walled Garden list. For example foraccounts.google.XX accounts.google.co.uk

United Kingdom, for Singapore, for Germany etc. Google domains list you canaccounts.google.com.sg accounts.google.de

find at https://ipfs.io/ipfs/QmXoypizjW3WknFiJnKLwHCnL72vedxjQkDDP1mXWo6uco/wiki/List_of_Google_domains.html

3. ID for SOCIFI Dashboard and NAS/Gateway ID

Find the MAC address of WAN Interface, that provides the internet connection. Go to Find the field"Status / Basic Network / WAN&Uplink". "M

in the table and row on the bottom of the VHGAC Address" "WAN Interface and IPV4..." WAN-1. You can also find this MAC on the label

device

Use this MAc address also for setting the in External Captive Portal setup."NAS/Gateway ID"

Step 1: Login to SOCIFI Dashboard

Step 2: Click on the " " tab on the left sidebarHotspots

Step 3: Click on the “ ” button located on the top right corner on the screen (pictured below)Add a new hotspot

Note: A pop-up window will appear (below)

Step 4: Select the Wi-Fi hardware manufacturer from the drop down menu

Step 5: Enter the (depending on the specific equipment manual) of your equipment. serial number or MAC address You can add multiple

hotspots at once.

Step 6: Set your Network location (this step is essential for correct ad targeting)

Step 7: In the pop-up window type your location or just move the marker on the map and click on the save button to confirm the selection. This

address is used for ad GEO targeting.

Step 7: Click Save

Note: Newly added hotspot are marked as ( ). After the first user connects to the hotspot via SOCIFI, the status willHotspot pending

automatically change and appear as ( ) within an hour. to test if it works properly. Active Get your first connections

Questo manuale è adatto per i seguenti modelli

Altri manuali Amit Router di rete

Amit

Amit CDD531AM-U02 Manuale utente

Amit

Amit WRTB1 Series Manuale utente

Amit

Amit RB-SW00A/NR1 Manuale utente

Amit

Amit WIP181AM Manuale utente

Amit

Amit RB-RTE Series Manuale utente

Amit

Amit AIPQB1215WA61/01 Manuale utente

Amit

Amit CDE530AM-002 Manuale utente

Amit

Amit CDM530AM-002 Manuale utente

Amit

Amit IWP87DAM-07151 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza