Amit KS-611M Manuale utente
ks-611m_mm_en_101
KS-611M
Camera system
Assembly manual
Version 1.01
KS-611M
ks-611m_mm_en_101 2/53
AMiT, spol. s r.o. does not provide any warranty concerning the contents of this
publication and reserves the right to change the documentation without obliga-
tion to inform anybody or authority about it.
This document can be copied and redistributed under following conditions:
1. The whole text (all pages) must be copied without any changes.
2. All redistributed copies must retain the AMiT, spol. s r.o. copyright notice
and any other notices contained in the documentation.
3. This document must not be distributed for purpose making of profit.
The names of products and companies used herein can be trademarks or regis-
tered trademarks of their respective owners.
AMiT is a registered trademark
Copyright (c) 2011, AMiT, spol. s r. o.
Producer: AMiT, spol. s r. o.
Naskové 3/1100, 150 00 Praha
www.amit.cz
KS-611M
3/53 ks-611m_mm_en_101
Contents History of revisions.........................................................................................5
Related documentation...................................................................................5
1. Definition of used terms......................................................................6
2. Introduction..........................................................................................7
3. Technical parameters..........................................................................8
3.1. System description.........................................................................................8
3.2. System functions............................................................................................8
3.3. System technical parameters.........................................................................8
3.4. Software.........................................................................................................9
3.5. IP monitor displaying states............................................................................9
4. System commissioning.....................................................................10
4.1. IP monitors commissioning...........................................................................10
4.1.1 IP address setup ..........................................................................................10
4.1.2 Loading of actual version of application........................................................14
Connecting to monitor’s FTP server .............................................................15
Deleting of previous application files ............................................................17
Copying of new application files ...................................................................17
Camera system restart.................................................................................18
Verifying version of loaded application.........................................................18
4.2. Cameras commissioning..............................................................................19
4.2.1 Camera identification....................................................................................19
Connecting camera to Ethernet....................................................................19
Searching attached camera through ACM....................................................19
4.2.2 Firmware update...........................................................................................21
4.2.3 Loading configuration template ....................................................................23
4.2.4 Camera lens setup (positioning and focusing)..............................................26
Viewing image from camera on service notebook........................................27
Taking off the camera cover.........................................................................28
Camera lens position setup..........................................................................29
Focusing the camera lens ............................................................................29
Deleting camera from ACM database...........................................................30
4.3. Recording unit commissioning......................................................................30
4.3.1 Power supply connector wiring check...........................................................31
4.3.2 Loading of actual version of OS ...................................................................31
4.3.3 IP address setup ..........................................................................................32
4.3.4 Loading of actual version of application........................................................34
Connecting to recording unit FTP server......................................................34
Deleting of previous application files ............................................................36
Copying of new application files ...................................................................37
Restart the recording unit .............................................................................38
Verifying version of loaded application.........................................................38
4.3.5 Recording unit storage format......................................................................38
5. APPENDIX A –Location of components.........................................41
6. APPENDIX B –Scenes ......................................................................42
KS-611M
ks-611m_mm_en_101 4/53
7. APPENDIX C –Block diagram..........................................................43
8. APPENDIX D –Software package contents ....................................44
IP monitor - AIPM1013/A..............................................................................44
Camera - AM3114-R/B.................................................................................44
Acasys Studio Vehicle Profile.......................................................................44
Recording unit - PPM2110/S256..................................................................45
9. APPENDIX E –Configuration parameters.......................................46
9.1. IP address setting up....................................................................................46
9.2. Cameras.......................................................................................................46
Login data.....................................................................................................46
9.3. IP monitor.....................................................................................................46
9.4. Recording unit ..............................................................................................47
10. Appendix F –Axis Camera Management (ACM).............................48
Installation....................................................................................................48
First start –password setup .........................................................................48
11. Appendix H –USB flash disk PPM2xxx...........................................50
KS-611M
5/53 ks-611m_mm_en_101
History of revisions
Document name: ks-611m_mm_en_101.doc
Author: Václav Krčmář
Revision
Date
Changes
100
12. 06. 2013
New document
101
08. 07. 2013
Corrections
Related documentation
1. Programmer’s manual
file: ks-611m_ms_en_xxx.pdf
2. Programmer’s manual
file: ks-611m_g_pl_xxx.pdf
3. Operation manual
file: aipm1013a_g_en_xxx.pdf
4. Operation manual
file: ppm21xx_g_en_xxx.pdf
5. Programmer’s manual
file: ppm21xx_ms_en_xxx.pdf
6. User manual
file: acasysstudio_ms_en_xxx.pdf
7. Operation manual
file: kkr-m31_g_en_xxx.pdf
8. User Manual Axis M3114-R
file: download from http://www.axis.com
KS-611M
ks-611m_mm_en_101 6/53
1. Definition of used terms
Displays the live image from one or more cameras (maximum four). When more
than single camera is displayed, quadruple (4Q) mode is used, where monitor
screen is splitted into 4 equal rectangular, into which are directed video streams
from cameras.
Performs the image capture and sends the digitized image in MJPEG (Motion
JPEG) format via Ethernet.
Switch with possible powering via communication cable (Power Over Ethernet).
Determines the way of viewing information on IP monitor. Can contain the fol-
lowing items:
1) empty screen
2) camera number to be displayed on IP monitor
3) list of up to 4 cameras, that can be displayed on IP monitor in quadruple
mode (4Q) –where the screen is splitted into 4 equal fields; in each field is
displayed image from one or none camera
Configuration tool for searching camera within network and setting of their view-
ing parameters.
Configuration file, used for setting of camera parameters through ACM.
Communicates with Master IP monitor in order to control the camera system.
Communication takes place via Ethernet.
IP monitor
Camera
PoE switch
Scene
Axis Camera
Management
(ACM)
Configuration
template
Superior
control (SC)
KS-611M
7/53 ks-611m_mm_en_101
2. Introduction
This document describes commissioning and adjusting of camera system (CS)
from software point of view.
Document does not care about mechanical assembly, which is solved in Opera-
tion manuals of individual components (see the Related documentation).
KS-611M
ks-611m_mm_en_101 8/53
3. Technical parameters
3.1. System description
KS-611M is a digital IP camera system. All cameras and monitors communicate
via Ethernet line.
System functionality is determined by software used in IP monitors and re-
cording unit.
To look over layout of individual components within the vehicle see the AP-
PENDIX A –Location of components.
3.2. System functions
System functionality is described in documents ks-611m_g_en_xxx.pdf and ks-
611m_ms_en_xxx.pdf.
3.3. System technical parameters
Quantity
2
Type
AIPM1013/A
Address configuration
ADD
Displayed data format.
MJPEG
Image resolution
640 x 480
Imaging frame rate
20 fps
Image delay
Max 200 ms
Type of imaging
Max 4 images per screen
Quantity
8
Type
AM3114-R/B
Quantity
1 pc.
Unit type
PPM2110/S256
Format of saved video
MJPEG
Recording rate
5 fps
Recording resolution
640 x 480 pixels
HDD capacity
256 GB (plug-in module)
Maximum disk utilization
95 % of overall capacity
Timeout at camera disconnection
5 s
SOS state duration
300 s
Service access
FTP
AIPM1013/A
2 x
IP monitor with software
AM3114-R/B
8 x
Indoor/ outdoor camera
KKR-M31/C
2 x
Camera housing, right-side, with grommet
KKR-M31/D
2 x
Camera housing, left-side, with grommet
PPM2100/S256
1 x
Recording unit
IP monitors
Cameras
Recording
unit
System
components
KS-611M
9/53 ks-611m_mm_en_101
3.4. Software
Software is published as software package, released at a certain date.
Actual software package contains all files needed for the entire camera system.
Content of actual valid program set is stated at APPENDIX D –Software pack-
age contents.
The whole software package is available at:
http://imp.amit.cz/www/kamerove_systemy/pesa/611m/index.html
3.5. IP monitor displaying states
In following table are briefly described states of displaying, which can occur on
IP monitor.
Situation
Description of screen view
Application is not loaded
Black screen without camera number.
Wrongly loaded application
Black screen without camera number.
Displayed scene 0
Black screen without camera number.
Video stream blackout
Symbol, see Fig. 1 - Video stream blackout
Fig. 1 - Video stream blackout
KS-611M
ks-611m_mm_en_101 10/53
4. System commissioning
When putting system into operation, we suppose: all system components are
properly mounted and capable of operating. Power supply voltage is properly
connected to all units Ethernet infrastructure must is properly installed and all
powering and communication cables are attached to units. For proper operation
of CS only components mentioned below must be used.
Outdoor camera housings must not be mounted before camera system full in-
stallation.
System commissioning consist of following steps:
IP monitors commissioning
Cameras commissioning
Recording unit commissioning
4.1. IP monitors commissioning
IP monitors commissioning consist of following steps:
IP address setup
Loading of actual version of application
Service notebook with installed FTP client file manager (Total Commander -
(TC hereinafter) - is recommended).
Application files (see Appendix D).
Configuration files (see Appendix D).
Setting of service notebook network adapter:
IP address: “NB_IP_AIPM”
Subnet mask: “NB_MASK”
Default gateway: do not fill
4.1.1 IP address setup
Connect service notebook to vehicle ethernet and turn-off firewall.
Run ALBDConfig.exe and wait until ethernet scan finish.
Equipment
needed
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Amit Sistema di sicurezza
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente