AMOI LC26T E Manuale utente
USER MANUAL
LC26T E/LC32T 1E31 3
Contents
5
1
6
2
8
9
11
12
19
19
20
23
Overview of TV
Teletext
Basic Operation
Menu
i. Picture Menu
ii. Sound Menu
iii. Channel Menu
iv. Window Menu
Remote Control Operation
Remote Control Overview
Safety Precautions
Important Safety Instructions
i. Front Panel Description
ii Back Panel Description
.
26
27
29
30
Troubleshooting And Maintenance
Display Mode
Specifications
i. Antenna Connection
ii. YPbPr/YCbCr (component) Connection
Connection
iii.S-Video and Video (Composite) Connection
v. Scart Connection
10
13
23
v. Setting Menu
4
Accessory List
15
Button Instruction 17
12
iv. VGA Connection
vi. HDMI / DVI Connection 14
-1-
Safety Precautions
The lightning flash with arrowhead
symbol within an equilateral triangle is
intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the unit's cabinet that
may be of sufficient magnitude to
constitute a risk of electric shock to
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the manual
accompanying the unit.
WARNING:
To prevent fire or electric shock, do not expose the
unit to rain or moisture. never attempt to open the
cabinet, dangerous high voltages are present in the
unit. refer servicing to qualified service personnel.
NOTE TO CABLE/TV INSTALLER:
Do not attempt to modify this product in any
way without written authorization from AMOI
Electronics Co., Ltd. Unauthorized modification,
warranty will be void.
CAUTION:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RECORD YOUR MODEL NUMBER
(Do this now, while it is convenient)
The model and serial number of your Machine are
located on the back of the TV cabinet. For your
future convenience, we suggest that you record
these numbers here:
MODEL NO._____________________
SERIAL NO._____________________
DON’T PLACE TO WET LOCATION
Apparatus shall not be exposed to dripping or
splashing with water, and do not place objects
filled with liquids on the apparatus, such as vases.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction manual,
may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
When in use, there must be a distance at least
5cm between the TV and some object front or
back of it, at least 5cm between the TV and
some object leftward or rightward of it .
!
!
!
!
!
This equipment has been tested and found to
comply CE . These limits are
designed to provide reasonable protection
against harmful interference when the equipment is
operated in a residential installation.
regulation standard
-2-
Important Safety Instructions
1.Read These Instructions
All the safety and operating instructions should be
read before the product is operated.
2.Keep These Instructions
The safety and operating instructions should be
retained for future reference.
3.Adhered to all warning
All warnings on the product and in the operating
instructions should be adhered to.
4.Follow All Instructions
All operating and use instructions should be
followed.
5.Do not use this product near water
Do not use this product near water for example,
near a bathtub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool;
and the like.
6.Clean only with dry cloth
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use dry cloth for cleaning.
7.Do not block any ventilation openings. Install in
accordance with the manufacturer instructions.
8.Do not install near any heat sources such as
radiators, heat register, stoves, or other apparatus
(including amplifiers) that produce heat
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades ,one blade is wider than the other. A
grounding type plug has two blades and third
grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11.Only use attachments and accessories specified
by the manufacturer.
12.Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, please
take caution when moving the cart to avoid injury
from tip-cover.
13.Unplug this apparatus during lightning or
unused for a long period of time.
14.Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
15.This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your product dealer
or local power company.
16.Protective Attachment Plug -The product is
equipped with an attachment plug having
overload protection. This is a safety feature. See
Instruction Manual for replacement or resetting of
protective device. If replacement of the plug is
required, be sure the service technician has used
a replacement plug specified by the manufacturer
that has the same overload protection as the
original plug.
-3-
Important Safety Instructions
17.Power Lines
An outside antenna system should not be located
in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, extreme care should be
taken to keep from touching such power lines or
circuits as contact with them might be fatal
.
18.Overloading
Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result
in a risk of fire or electric shock.
19.Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in
a fire or electric shock. Never spill any kind of liquid
on the product.
20.Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
other hazards.
21.Safety Check
Upon completion of any service or repairs to this
product, ask the service technician to perform
safety checks to determine that the product is in
proper operating condition.
22.Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling
only as recommended by the manufacturer. Any
mounting of the product should follow the
manufacturer instructions, and should use a
mounting accessory recommended by the
manufacturer.
23.Outdoor Antenna Grounding
If an outside antenna or cable system is connected
to the product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode. See
figure below.
OK
MUTE
POWER
LIST
CH+
CH-
SOURCE
SOURCE
DTV/TV
LAST
DTV
MENU
GUIDE
DISPLAY
TXT/MIX
VOL VOL
MENU EXIT
FAV+FAV FAV-
AUDIO
FREEZE
ASPECT VIDEOOFF VOG
SUBTITLE
PAGE
12
6
3
5
4
78
0
9
DUAL
i
-4-
Accessory List
Please check the accessories and ask the local dealer for help when they are lost or damaged.
Note: Please use the power cord which includes the ground wire.
This TV set shall be connected to a main socket outlet with a protective grounded AC
power outlet.
Where to place the TV
1.Selecting where to place the TV.
Caution:
• Select a place without direct sunlight or good ventilation
• Do not remove the stand from the display unless using a proper wall mount.
• Keep enough space above and behind the TV.
• The TV is heavy ake sure to move it safely.
Picture A)
Picture B)
.M
(
(
2. Handling the TV.
2 inches
(5 cm)
or more
(Picture A) (Picture B)
Remote control (×1)Power Cord (×1) User’s manual CD (×1)
and Quick Start(×1)
Quick Start
"AA" size battery (×2)
1
3
2
1
8
45 6 7
1
4
3
2
Front Panel Description Overview of TV
Remote control sensor
Standby indicator
Speaker
8
5
6
7
SOURCE
Press it to display the menu of the available viewing source.
MENU
Press it to display the OSD menu. The button also acts as select button "OK" in source menu.
CH+/-
VOL+/-
Press it to adjust volume . The two buttons also act as direction buttons .in menu display
Turn on/standby the TV.
STANDBY
Press it to choose the channel. The two buttons also act as direction buttons .in menu display
-5-
-6-
Back Panel Description
Video input
S-Video input
Audio input
Headphone Output
Power Switch
Side interface:
Back Panel of Model: LC32T31E
VGA
AUDIO IN EXT1 EXT2
ANTENNA
100-240 V
50/60HZ
OPTICALVGA IN
COMPONENT IN
POWER HDMI 1 IN-HDMI 2 IN-
AV IN
Rear interface
Rear interface description
Notes:
1.The service only interface is used to upgrade and service Without permission, please don’t connect.
2. When input the earphone, the speaker is silent.
.
-7-
Rear interface
Rear interface description
Back Panel Description
Back Panel of Model: LC26T31E
100-240 V
50/60HZ
POWER VGA
AUDIO IN
VGA IN
EXT1 EXT2
ANTENNA
OPTICAL
HDMI 1 IN-HDMI 2 IN-
COMPONENT
IN
AUDIO
IN
Video input
S-Video input
Audio input
Headphone Output
Power Switch
Side interface:
AV IN
Notes:
1.The service only interface is used to upgrade and service Without permission, please don’t connect.
2. When input the earphone, the speaker is silent.
.
Remote Control Overview
Standard Remote Control
Notes:
1.This remote control needs two pieces of batteries.
.These functions marked * are only available for the model built-in DVB-T tuner.
3.For details of the buttons operation, please refer to the "Button Instruction" (Page 17).
2
-8-
OK
MUTE
POWER
LIST
CH+
CH-
SOURCE
SOURCE
DTV/TV
LAST
DTV
MENU
GUIDE
DISPLAY
TXT/MIX
VOL VOL
MENU EXIT
FAV+FAV FAV-
AUDIO
FREEZE
ASPECT VIDEO OFF VOG
SUBTITLE
12
6
3
5
4
78
0
9
DUAL
i
Enter OSD setup mode
Colour (red/green/yellow/blue) buttons
Standby button
Main source
Last source
*DTV/TV
Channel list
*Guide
*DTV Menu
Display status
Txt/Mix
Next /Previous channel
Teletext hold
Stereo/Mono sound selection
Numerical buttons
Fav, Fav-, Fav+ *
Exit
Enter
Teletext Page down
Direction buttons
Mute
Teletext Page up
Picture proportion
*Subtitle
*Audio
Teletext reveal
Volume up/down
Teletext Sub page
Freeze Video off
Page
Video on graphic (not available for 26 and 32 )*""
Teletext size
Last channel
PAGE
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali AMOI TV LCD
