Amoonsky AMS-SC358 Manuale utente

LED Video Splicer & Processor

AMS-SC358

User Manual

LED Video Processor

户手册

User’s Manual

Contents

Splice Wizard.....................................................................................................................2

Safety Instructions.............................................................................................................3

Note..................................................................................................................................3

Warning............................................................................................................................3

Copyright..........................................................................................................................3

Trademarks.......................................................................................................................4

introduction.......................................................................................................................4

About LED Video Processor .........................................................................................4

Panel.................................................................................................................................5

Rear Panel ..................................................................................................................5

Front Panel .................................................................................................................6

MenuSystem.....................................................................................................................8

MenuStructure............................................................................................................8

Operation menu...........................................................................................................8

Default menu...............................................................................................................9

Main menu..................................................................................................................9

Setting and Operation...................................................................................................... 10

Language.................................................................................................................. 10

Reset........................................................................................................................ 10

Output Resolution..................................................................................................... 10

Switching Effect.........................................................................................................11

Fade time settings................................................................................................11

Black and Freeze settings.....................................................................................11

Splicing applications................................................................................................. 12

Equal Splicing（Leftand right splicing）.............................................................. 12

Unequal Splicing................................................................................................. 12

Capture..................................................................................................................... 13

PIP............................................................................................................................ 13

Keying...................................................................................................................... 15

Mode ........................................................................................................................ 15

Save Mode.......................................................................................................... 15

Recall Mode........................................................................................................ 15

Key Lock................................................................................................................... 16

VGA Adjust................................................................................................................ 16

-----Splice Wizard----

1、set the channel A, B resolution

OutputAchannel：Default menu→ Output →Output A →Custom resolution →Horizontal width（Knob

adjustment size）→Vertical height（Knob adjust size）→Change resolution

OutputBchannel：Default menu→ Output →Output A →Custom resolution →Horizontal width（Knob

adjustment size）→Vertical height（Knob adjust size）→Change resolution

2、Set up splicing

Default menu →splice→ splice setup wizard →Set A screen size（Horizontal width、Vertical height，

OK key selection determination）→Set B screen size（Horizontal width、Vertical height，OK key

selection determination）→Set splicing mode（Horizontal / vertical splicing，OK key selection

determination）

Schematic diagramis as follows：（suchas one screen is 1408x896，Another screenis 1280x896，

The resolution of the entire large screen is 2688 x 896）

SYSTEM

PIP

OUTPUT

SPLICE

IMAGE

FUNC

splice setup wizard 》》》

Splicing synchronization open

SpliceA 》》》

Splice B 》》》

Please set the size of the A screen

Horizontal width：1408

Vertical height：896

Please set the size of the B screen

Horizontal width：1280

Vertical height：896

Please set the splicing mode

Horizontal splice

A B

OK key

splicing success

OK key

output

Output A

Output B

Common

resolution or

custom

resolution

Output A width andheight

Safety Instructions

This symbol prompts the user, the device user manual has important operating and

maintenance instructions.

This symbol warns the userof the equipment inside the enclosure exposed to

hazardous voltages, there is therisk of electric shock.

Note

Read the manual• Read and understand all safety and operating instructions before using the

equipment.

Save the manual• The safety instructions should be kept for future reference.

Follow Warnings • Follow all warnings and instructions marked on the equipment or in the user

information.

Avoid Attachments • Do not use tools or attachments that are not recommended by the

equipment manufacturer because they may be hazardous.

Warning

Power sources • This equipment should be operated only from the power source indicated on the

product.

This equipment is intended to be used with a main power system with a grounded (neutral) conductor.

The third (grounding) pin is asafety feature, do not attempt to bypass or disable it.

Power disconnection • To remove power from the equipment safely, remove all power cords from

the rear of the equipment, or the desktop power module (if detachable), or from the power source

receptacle (wall plug).

Power cord protection • Power cords should be routed so that they are not likely to be stepped on or

pinched by items placed upon or against them.

Servicing • Refer all servicing to qualified service personnel. There are no user-serviceable parts

inside. To prevent therisk ofshock, do not attempt toservice this equipment yourself because

opening or removing covers may expose you to dangerous voltage or other hazards.

Slots and openings • If the equipment has slots or holes inthe enclosure,these are provided to

prevent overheating of sensitive components inside. These openingsmust never be blocked by other

objects.

reserved.

Trademarks

VGA and XGA are registered trademarks of IBM Corporation.

VESAis a trademark of the Video Electronics Standards Association.

HDMI logo and High-DefinitionMultimedia Interface (High-Definition Multimedia Digital Interface) are

HDMI Licensing LLC. Trademarks.

Introduction

This manual contains information about howto use, install andconfiguration the LED video splicer&

processor, in addition, also relates to knowledge LED video processorand LED video systems. If Use

the LED video processor , please readthis manual carefully.

About LED Video Splicing Processor

The LEDsplicing processor has three powerful video processingcores, multi-graphics multi-input

smart splicing processor, whichcan be widely usedin performing arts activities, command andcontrol

center, video conferencing, hotels, courts and conference rooms.

The LED splicing processorhas 3-channel output, 2-channel for splicing, 1 channel for monitoring.

Can achieve 2 ×1 or 1 ×2 channel hybrid splicing, a single product can splice 5.3 million pixel

user-defined output.

The LED splicing processor can accommodate awiderange of input sources,can access upto11

video inputs, including2 DVI, 2 HDMI, 4VIDEO, 2VGA and 1 SDI (optional). Each channel can

accept standard resolution orhigh resolutionvideo signals, the DVIandVGAcan receive upto 1920

×1200 @ 60Hz resolution input, to meet a variety of high-definition output.

The splicing processor is easy to use, using the key panel andmenu system tocomplete thecomplex

settings.Avariety ofinput interfaces, tomeet thedifferent signal needs. Built-in4 LEDsending card

installation location to meet the installation requirements of large-screensystem.

Panel

Rear panel

Figure 1- Rear Panel

AC connector —Use IEC standard power cable，input 100-240VAC, 50-60Hz.

AC switcher —poweron/off.

Video input connector :

● AV1, AV2, AV3, AV4-- Composite video input, BNCconnector, support PAL、PAL-M/N、

NTSC、SECAM formats. Youcan connect DVD players and camcorders.

●DVI1, DVI2 –DVI video input. DVI-I/DVI-Dconnector. support VESAstandard video format.

●HDMI1, HDMI2 –HDMI video input. HDMI-Aconnector. support HDMI1.3 / VESAstandard.

●VGA1, VGA2 –VGAvideo input. DB-25 connector. support VESAstandard video format.

●SDI, SDI-LOOP –SDI video input, loopout. BNCconnector. Enter the video support HD

video camera, etc..

Video output connector:

●CH-A/CH-B -- DVI video output. DVI-Iconnector. CH-A, CH-B output same signal.

●CH-M/Monitor -- DVI video output. DVI-I connector. Connect to monitor screen.

RS-232 —Serialcommunication connector for engineering testing, the device is programmed, PC

software control, communication baud rate is 115200bps.

LED sending card slot —Built-in4 sending card slot. LED sending card installation location aside.

When installed, the user can first open the back cover and the small bracket, mounting, internalset

aside four 5V power connector, four 2.0x4PINconnectors. After installing the plug 5V power supply.

Control connector —Net cable, USB inputcontrol.

Audio connector —Audio output (L1 R1 GND L2 R2) .

Front panel

Figure 2- Front Panel

LCD display —display the parameters and usersettings.

Operating button —operate the menusystem.

● OK “confirm”

● ESC “exit” or “back”

● Knob press down “OK”, turn right ”+” turn left ”-”adjust the parameters on menu.

INPUTS —INPUTbutton in the region, including 11 input signal selection, screen testing function,

VGA auto correction. button Indicators of the button state in the region there are three kinds, namely:

Indicator light function –the button light onwhen power on.

(1) Slowflicker：the interval is 1 second andkeep flicker –no input signal.

(2) Fast flicker：the interval is 0.3 second –decoding the input signal.

(3) Light on：no flicker –inputsignal working.

Figure 3-Inputs

● AV1, AV2, AV3, AV4-- video inputselection button.

● VGA1, VGA2 -- VGAinput selection / autocorrection button. Keep press VGA1/2 button

one more time could enable the auto correction function.When the input channel for VGA1,

and VGA1 have screen output, press VGA1 (AUTO) button, you can recalibrate thecurrent

VGA1 signal. VGA2 button also has the same functionality and operation.

● DVI1, DVI2, HDMI1, HDMI2 –DVI, HDMI input selection button.

FUNCTION —including display mode, black output, preset, pip function andswitch type.

Figure 4-Function

● PART/FULL –part screen display function, set the parameters in SPLICE menu.

● PIP –enable/disable the PIP function, set the parameters in PIP menu.

● BLACK –output black/freeze screen, select the output in the FUNC menu.

●OUT –set the output resolution for A, B output-channel and monitor output.

●SDI –SDI input selection button.

●TEST –output testing pattern(colorful image, color bar etc.).

● MODE –save or load the usersettings.

●FADE/CUT –select switchingtype, support seamless and fade-in/fade-outswitching.

Hint：whenPIP function is working,PART/ FREEZE/BLACK/FADE are disabled.

Menu System

Menu Structure

Figure 5 - Main Menustructure diagram

Operationmenu

The mainmenu operation buttons ESC“exist”, knob,OK theman-machine interface for a 240x64 dot

matrix LCDscreen.

Main Menu

OUTPUT

Default

SPLICE

PIP

IMAGE

FUNC

SYSTEM

Function Description

Set theoutput resolution, precise adjustment

of the output resolution adjustment of the

output resolution

Adjustmentsplice, equal splice or unequal or

parts ofthe image display

Set PIP size, position, theinputsource

Adjust image color, brightness, contrast, etc.

Setting the language, save or recall presets,

BLACK button functions

Set advanced features, information, Factory

Reset

Figure 6- boot process and enter the main menu

Default menu

The default menu after the device starts, LCDscreen interface, shown above, the input source, the

input sourceconnectedstate, the input source is connected,the output resolution, mosaic mode,

brightness and output audio channels and other information,shows the processing the main

parameters menusystem.

Figure 7 - Defaultmenu

2. Main menu

The Main Menu is an important parameter adjustment user interface, almost all of the settings can be

done in the main menu. In the following sections there will be a detailed description ofthe operation

and settings for each function.

Figure8 -Mainmenu

Input：HDMI 1080p Model：Full

Monitor：1024x768/60 Bright：50

OutputA：1024x768/60 PIP ：CV1

Output B：1024x768/60

OUTPUT

SPLICER

PIP

IMAGE

FUNC

SYSTEM

Powerup

Display product logo and

model; the button flashes

three times.

Default

Main menu

30S

Indice

Altri manuali Amoonsky Hardware per computer

Amoonsky

Amoonsky AMS-SC16K Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente