Amron AMCOMMAND Il Manuale utente

Instruction Manual

For

Amron International Diving Supply, Inc.

Model 8225-HP & 8225-HP2 AMCOMMAND Il

Two Diver Air Control Systems

S/N______________________

This manual and the information contained herein is provided for use as an operation and

maintenance guide. No license or rights to manufacture, reproduce, or sell either the manual or

articles described herein are given. Amron International Diving Supply, Inc. reserves the right to

change specifications without notice.

Amron International Diving Supply, Inc.

1380 Aspen Way

Vista, California 92081 U.S.A.

Phone (760) 208-6500 ¥Fax (760) 599-3857

Email: [email protected]

Website: www.amronintl.com

Revised December 2011

TABLE OF CONTENTS

SECTION

Specifications 1

Air Control.....................................................................................................................1.1

Depth Monitoring...........................................................................................................1.2

Communications ...........................................................................................................1.3

Enclosure......................................................................................................................1.4

General Information 2

Description....................................................................................................................2.1

Air Control.....................................................................................................................2.2

Depth Monitoring...........................................................................................................2.3

Low Pressure Alarm Module.........................................................................................2.4

Communications ...........................................................................................................2.5

Diving Safety and Regulations 3

Diving Safety & Regulations..........................................................................................3.1

Personnel Requirements...............................................................................................3.2

Air Supply Requirements ..............................................................................................3.3

Calibration, Service and Inspection...............................................................................3.4

Options 4

Warranty and Service Policy 5

Limited Warranty...........................................................................................................5.1

Service Policy................................................................................................................5.2

Controls and Connections 6

General .........................................................................................................................6.1

Air Control.....................................................................................................................6.2

Drawing, Air Control Front Panel Model 8225-HP ........................................................6.3

Depth Monitoring (Pneumo)..........................................................................................6.4

Low Pressure Alarm......................................................................................................6.5

Drawing, Pneumo Front Panel Model 8225-HP............................................................6.6

Communications ...........................................................................................................6.7

Drawing, Communicator Front Panel Model 2825A-8225.............................................6.8

TABLE OF CONTENTS

SECTION

Pre-Dive Procedures 7

Pre-Dive Set-Up ...........................................................................................................7.1

Pre-Dive Check-Out......................................................................................................7.2

Pre-Dive Pneumo Test..................................................................................................7.3

Pre-Dive Communications Test ....................................................................................7.4

Connecting Diver Umbilical...........................................................................................7.5

Low Pressure Supply....................................................................................................7.6

Operating Procedures 8

Low Pressure Breathing Air ..........................................................................................8.1

High Pressure Breathing Air..........................................................................................8.2

Pre-Operation Check List..............................................................................................8.3

Pneumo Readings.........................................................................................................8.4

Diver Communications..................................................................................................8.5

2-Wire Operation...........................................................................................................8.6

Diagram, Set-Up Instructions (Figure 3) .......................................................................8.7

Simulcom (4-Wire) Operation........................................................................................8.8

Diagram, Simulcom 4-Wire Connection, Model 2825-8225 (Figure 4) .........................8.9

Simulcom - What, Why and How? ..............................................................................8.10

What is Simulcom? .....................................................................................................8.11

To Operate and/or Check-Out Simulcom....................................................................8.12

Theory of Operation 9

Mechanical....................................................................................................................9.1

Flow Diagram, (8225-HP) Air Control ...........................................................................9.2

Electrical........................................................................................................................9.3

Functional Block Diagram (2825-8225).........................................................................9.4

Maintenance 10

Review of Scheduled Maintenance.............................................................................10.1

Scheduled Maintenance..............................................................................................10.2

Trouble Shooting & Repair 11

General Information ....................................................................................................11.1

Air Control...................................................................................................................11.2

Depth Monitoring.........................................................................................................11.3

Diver Communications................................................................................................11.4

Problems and Probable Causes .................................................................................11.5

TABLE OF CONTENTS

III

SECTION

Reference Material 12

Dive Log, U.S. Navy (Chart)........................................................................................12.1

Repetitive Dive Worksheet..........................................................................................12.2

No Decompression Limits...........................................................................................12.3

Gauge Pressure for Depth of Seawater & Fresh Water..............................................12.4

Equivalent Depths of Seawater & Fresh Water...........................................................12.5

Drawings 13

Schematic Diagram-Model 2825A-8225.....................................................................13.1

Parts Identifier, 2832-202............................................................................................13.2

Schematic Diagram- 28FDW OPTION........................................................................13.3

Schematic and Parts Locator-Model 2324-202...........................................................13.4

Parts Locator- Pneumo Front Panel 8225-200 ...........................................................13.5

Parts Locator - Pneumo Back Panel 8225-200...........................................................13.6

Parts Locator - Air Control Front Panel 8225-400HP..................................................13.7

Parts Locator - Air Control Back Panel 8225-400HP..................................................13.8

Parts Locator - Air Control Front Panel 8225-400HP2................................................13.9

Parts Locator - Air Control Back Panel 8225-400HP2..............................................13.10

Parts Locator - Diver Communications 2825A-8225-28FDW ...................................13.11

Parts Locator - Regulator 8000-0201........................................................................13.12

Parts List 14

Amcomand II Air Control System, Model 8225-HP.....................................................14.1

Amcomand II Air control System, Model 8225-HP2....................................................14.2

8225-200 Pneumo Panel Assembly............................................................................14.3

8225-300 Case Assembly...........................................................................................14.4

8225-400HP Air Control Panel Assembly, Model 8225-HP........................................14.5

8225-400HP2 Air Control Panel Assembly, Model 8225-HP......................................14.6

8225-500 Yoke/Hose Assembly..................................................................................14.7

8000-0201 Regulator, Pressure Reducing..................................................................14.8

2825A-8225-400M Front panel Assembly...................................................................14.9

2405-28 Microphone, Push to Talk...........................................................................14.10

2823-602 External Charger Assembly......................................................................14.11

Recommended Spare Parts......................................................................................14.12

Repair & Calibration Log 15

Repair and Maintenance Log......................................................................................15.1

Gauge Calibration Log................................................................................................15.2

SPECIFICATIONS

AIR CONTROL 1.1

High Pressure Input

Input Pressure Range.............. 500-3000 PSI with standard CGA850 Yoke Connections

***500-4500 PSI with optional 300 Bar DIN Adapters

Inlet Valve (Source Select)...............................................................................................2

Gauge - 0-5000 PSI............................................................................. Accuracy +/- 1.5%

Check Valve, prevents reverse inlet flow.........................................................................2

Input Filter, In Line Pre Regulator......................................................................50 Micron

CGA850 Yoke connections with 6ft. High-pressure hose whips (standard).....................2

***Available with optional 300 Bar DIN Adapters, Amron Part No. SAA5300

High Pressure Regulator, Tescom

Outlet Pressure Range.......................................................................................0-265 PSI

High Flow.............................................................................................................Cv = .24

Max Pressure......................................................................................................4500 PSI

Low Pressure Input, with Check Valve

Max Pressure........................................................................................................285 PSI

Inlet Connection (#6 JIC) .................................................................................................1

Diver Outlet Connection, (O2 Fitting)...............................................................................2

Diver Outlet Valve............................................................................................................2

Air Pressure Gauge, 0-400 PSI ........................................................... Accuracy +/- 1.5%

Over Pressure Relief Valve Set Pressure.............................................................285 PSI

Universal Storage Block - CGA850 Yoke & 300 Bar DIN

HP hoses and CGA850 yokes or optional 300 BAR DIN connections are secured to

universal storage blocks mounted on air control panel located inside of unit.

Panel

Material ......................................................................................................Stainless Steel

Powder Coating......................................................Black Textured Semi-Gloss Polyester

Silkscreen Graphics ............................................................................Red, White & Blue

SPECIFICATIONS

DEPTH MONITORING (PNEUMO) 1.2

Pneumo Gauge, 3D Precision

Mirrored Scale, 6 Inch......................................................................................................2

Range .........................................................................Dual Scale 0-250 FSW/0-76 MSW

Divisions.................................................................................................................. 1 Foot

Accuracy .............................................................................................0.25% of Full Scale

Pneumo Valve

Regulating Valve, KEL-F Seat .........................................................................................2

Outlet Connection

O2 Fitting Chrome Plated Brass ......................................................................................2

Low Pressure Alarm

Audio Range, 22.5-125 PSI .......................................................... Factory Set at 100 PSI

Panel Material

Material ..............................................................................................................Aluminum

Powder Coating......................................................Black Textured Semi-Gloss Polyester

Silkscreen Graphics ...............................................................................................Yellow

COMMUNICATIONS 1.3

AMCOM II, Model 2825A-8225 2-Diver Communicator

Operating Voltage................................................................................................12 V DC

Power .............................................................................................Rechargeable Battery

or External Power..................................................................................................12 VDC

Operating Time ......................................................................................Nominal 60 Hour

Charger ........................................................................................................ 110/220 Volt

Frequency Response ...................................................................................300-7500 Hz

Audio Power..........................................................................................................12 Watt

Panel................Black Powder Coat over Stainless Steel with White Silkscreen Graphics

ENCLOSURE 1.4

Case Material

Pressure molded fiberglass, with aluminum and or stainless steel hardware. Includes

carrying handle, latches, and stay hinge to lock unit in open position (upper section is

locked upright in respect to lower section).

Case

Lid closed....................................................................................... 20" W x 14" D x 12" H

Lid Open......................................................................................... 20" W x 14" D x 21" H

Weight: ...........................................................................................Approximately 70 lbs.

Color: ..................................................................................................International yellow

GENERAL INFORMATION

DESCRIPTION 2.1

The AMRON AMCOMMAND II Model 8225-HP & 8225-HP2 is a portable self contained two diver

high and low pressure air control, communication and depth monitoring (pneumo) system, for

surface supplied diving operations. The system is designed to provide a central control point for the

supply of breathing air to the divers, monitor the diver’s depth, and provide two way communications

between the divers and the surface. The system is a housed in a durable pressure fused fiberglass

case, which provides a convenient, compact, rugged, professional system.

AIR CONTROL 2.2

The Air Control Section consists of two high pressure inputs, a single low pressure input, and two

diver air connections.

Standard 3000 PSI MAX Input

Model 8225-HP & HP2 comes standard with 2 each CGA850 yokes attached to 6-foot long

HP hoses. The CGA850 yoke limits the maximum input pressure to 3000 PSI.

Optional 4500 PSI MAX Input

Installing the 300 Bar DIN Adapters, Amron Part No. SAA5300, will increase the maximum

input pressure limit to 4500 PSI. Simply remove CGA850 yoke nut and yoke from bleeder

body, screw on 300 Bar DIN adapters, and tighten with a wrench.

Each input has a shut off valve and 0-5000 psi gauge.

Check valves provide protection against back flow of air from a full bottle to an empty, when

switching HP bottles. High-pressure air is reduced to desired low pressure via a Tescom adjustable

regulator. The input to the regulator is protected against contamination by a 50-micron filter.

Regulator output pressure is adjustable over the range of 0 to 285 psi; a 2 1/2" 0-400 PSI gauge

monitors the output pressure. The unit has an over pressurization relief valve, factory set to 285 psi.

The low-pressure input is #6 JIC (3/8), and has a check valve to permit simple switch over from low-

pressure air to high-pressure air.

Divers air line connection is O2type fitting; control is via two 1/4 turn ball valves permitting

unrestricted flow.

DEPTH MONITORING 2.3

The diver’s pneumo connection is O2type fitting, pneumo valves are regulating type. Pneumo

gauges are, 6" high precision 0.25% of full-scale accuracy, dual scale 0-250 FSW/0-76 MSW with 1

foot increments. Gauge protectors are provided for each pneumo gauge.

GENERAL INFORMATION

LOW PRESSURE ALARM MODULE 2.4

Low Pressure Alarm Module supplies a loud audio signal to alert the operator when a diver's air

pressure falls below a preset limit of 100 PSIG.

COMMUNICATIONS 2.5

The diver communication system is based on the field proven AMRON Model 2825. The unit is

powered from internal rechargeable gel cell batteries, battery charger provided. Operating time from

fully charged battery is approximately 60 hours. Unit can also be operated from an external 12 V DC

source, via charger jacks on the front panel. The communicator has a unique battery condition

indicator; Steady GREEN light indicates battery voltage level is good. Blinking GREEN light

indicates battery voltage is approaching a low level (approx 2-4 hours of operation remain). Steady

RED light indicates battery voltage is below the level necessary to guaranty proper operation.

WARNING: When Battery Condition indicator is steady RED light, communication will stop. The

battery condition indicator also functions in the same manner when operating from an external power

source.

Possibly the most useful feature of the AMCOMMAND communicator is the ability to operate the unit

remotely. This feature allows the use of a hand held push to talk microphone (included), or a walk

and talk type module (optional). This allows the tender (operator) to move about and still maintain

contact with the divers.

The use of the noise canceling push to talk microphone automatically disconnects the speaker when

talking to the divers cutting out the majority of the background noise, greatly improving the

intelligibility of communications.

The communicator provides 12 watts voice power. This power level provides the volume necessary

to communicate clearly even under difficult conditions. Standard controls include; power on/off,

tender volume, diver volume, speaker on/off, 5-way binding post diver input, push to talk switch,

headset/microphone jack, and remote push to talk jacks.

28/FDW Wireless Tender Option

Models 8225-HP/28/FDW & 8225-HP2/28/FDW Amcommand II comes with the Amron 2 Diver

Deluxe Communications System with Wireless Tender. This feature allows the tender (operator) to

be completely mobile around the dive sight while still remaining in constant contact with the divers.

The wireless tender is a full duplex (SIMULCOM) system. The system comes complete with a

built-in transceiver module with antenna and one wireless headset with clip-on belt module. The

system allows unlimited headsets for listen only. The unit operates FM at 49 MHz. The range is up

to 1/4 mile and uses one 9 volt battery.

SAFETY & REGULATIONS

DIVING SAFETY & REGULATIONS 3.1

Safe Diving does not happen by accident. There are few occupations in the world, which require such a

broad range of knowledge and training as diving. There are many diverse factors, which can affect

diving safety i.e., planning, weather, equipment, location, water conditions, as well as the type of work

being done. The single most important factor in eliminating accidents is planning and attention to detail.

Diving knowledge, training and experience are fundamental elements needed to execute a safe dive.

The following reference materials are recommended as sources of information for running a safe

diving operation:

1. U.S. Department of Labor, OSHA Regulations 1910.401 Sub-part T–Commercial

Diving Operations.

2. U.S. Navy Diving Manual.

3. Divers Handbook of Underwater Calculations.

Diving regulations

Several codes and regulations cover diving operations and procedures. In the United States most

commercial diving operations are covered by the OSHA (Occupational Safety and Health Administration)

regulations, or Individual State regulations, which are adopted from the federal regulations, and made a

part of the civil code.

While government agencies are exempt from OSHA regulations, they generally fall under other

regulations, which are similar or stricter than OSHA. If they are completely exempt, they must still abide

by the procedures for operating a safe dive.

While no agency (within the U.S., for commercial diving operations) tests or approves equipment for use,

they do establish minimum standards, which should be followed. The suitability of a given piece of

equipment for a particular task is left to the supervisor of the dive. The following information is extracted

from the OSHA regulations for commercial diving operations.

NOTE: The information is not presented as a direct or complete quotation, but rather as our

interpretation of the regulations. Each diving supervisor should obtain a copy of these regulations for

their own use.

Copies of the complete section of Commercial Diving Operations are available from Amron International

for a nominal charge.

WARNING: DO NOT USE THE AMCOMMAND II FOR THE FOLLOWING

1. Mixed gas diving operations with an oxygen level greater than 40%.

2. Oxygen or oxygen enriched breathing mixtures above 40%.

The AMCOMMAND II is not designed or intended for these applications.

SAFETY & REGULATIONS

PERSONNEL REQUIREMENTS 3.2

1. Each dive team member shall have the experience or training necessary to perform assigned

tasks in a safe and healthful manner. The person operating the AMCOMMAND II must be

trained in the proper operating procedures, and emergency operating procedures.

2. It is the responsibility of the designated person in charge of the diving operation to be on-site

at all times. He is responsible for all aspects of the diving operation affecting the safety and

health of dive team members.

3. The dive shall be terminated when:

1. A diver requests termination.

2. A diver fails to respond to instructions.

3. Diver communications are lost and can not be re-established quickly.

4. A diver begins to use diver carried back-up breathing air, or location reserve breathing air.

5. Operational conditions deteriorate to a point where safe diving can not be guaranteed.

AIR SUPPLY REQUIREMENTS 3.3

WARNING

Regardless of the type of air supply being used for surface supplied diving; the diver must always have a

back-up supply of air. Generally this is in the form of a bailout bottle. The back-up air supply must be

adequate to return the diver to the surface, if the dive requires in-water decompression this must be

accounted for also.

1. The diver's air supply may originate from a low-pressure air compressor, high-pressure air cylinders,

or a combination of both. Regardless of the source, the air must meet certain established standards

of purity and must be supplied in an adequate volume for breathing.

2. The air supply requirements depend upon the specific factors of each dive such as depth, duration,

level of exertion, and type of diving system (helmet/hat) being used. It is the dive supervisor's

responsibility to ensure that an adequate supply of air is available and on site for the planned dive.

This includes sufficient back-up air to safely return the diver to the surface in the event the primary

supply of air is lost.

3. Low-pressure compressors used for breathing air should be specifically designed for diving.

Compressors used to supply air to the divers shall be equipped with a volume tank which has a

check valve on the inlet side, a pressure gauge, relief valve, drain valve, and a proper filtration

system. The output of the air compressor system shall be tested for air purity every 6 months by

means of an air sample.

4. Air compressor intakes shall be located away from and up-wind of, areas containing exhaust or other

contaminants.

5. NOTE: OSHA Regulations require a decompression chamber capable of recompressing the diver

at the surface to a minimum of 165 FSW (6 ATA) shall be available at the dive location for a

surface-supplied air diving to depths deeper than 100 FSW.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Amron Strumento subacqueo

Amron

Amron AMCOM III 2830A Series Manuale utente

Manuali Strumento subacqueo popolari di altre marche

Sherwood

Sherwood Amphos Manuale utente

Zeagle

Zeagle N2ition Manuale utente

Tusa

Tusa Q 1203 CE Guida

Sherwood Scuba

Sherwood Scuba Insight Istruzioni per il montaggio

SUBMERSIBLE SYSTEMS

SUBMERSIBLE SYSTEMS Spare Air 600 Manuale utente

OCEANS

OCEANS S1 Supersonic Manuale utente

heinrichs weikamp

heinrichs weikamp OSTC 2 Manuale utente

Omer

Omer SP2 Manuale utente

Scott

Scott PRO-PAK Manuale utente

Apeks

Apeks BLACK SAPPHIRE Manuale utente

Waterproof

Waterproof DRYSUIT Manuale utente

Dräger

Dräger PAS AirPack 1 Manuale utente

Dive Lab

Dive Lab KIRBY MORGAN KMB 18 Manuale utente

Ratio Computers

Ratio Computers iDive Manuale utente

Oceanic

Oceanic PROPLUS X Manuale utente

CFA

CFA MSA G1 Manuale utente

Genesis

Genesis Centauri Manuale utente

TREND

TREND GAUGE/60 Manuale utente