Amrotec MiB-9 Manuale utente
1
Leading Image Processing Technology
We've been there when you needed!
Operator’s Manual V.1
MiB-9 Currency Discriminator
2
Important Safety Information
Always be careful when using the machine. To reduce the risk of fire, electrical shocks, and other injuries, keep these
safety considerations in mind when installing, using, and maintaining your machine:
Stability : Place the machine on a secure, stable surface. The machine can be seriously damaged if it falls.
Power Supply : Provide correct power to the machine, as listed on the back of the machine. If you are not sure
of the type of power that is supplied to your office, call your electric company.
Grounding : If the plug has three prongs, it must be plugged into a grounded (three hole) outlet. Grounded
plugs and outlets are designed for your safety - do not try to make a three-prong plug fit into a
two-prong outlet by modifying the plug or outlet in any way. If you cannot insert the plug into your
wall outlet easily, then a qualified electrician should inspect the outlet.
Overload : Do not plug too many electrical devices into a wall outlet or an extension cord. An overloaded
outlet could be a reason of a fire and electrical shock hazard. Power stripe must have surge
protector or anywhere machine is connected to.
Cleaning : Before cleaning the machine, unplug it from the power outlet. Clean exposed parts with a soft
cloth slightly dampened with water. Do not use aerosol cleaners.
Gas Leaks : Never use any machine close to a gas leak. If you think gas is leaking, shut off the machine and
unplug immediately and contact the gas company or provider immediately. A small electrical
spark in the machine could cause a fire or explosion.
3
Safety Notes
MiB-9 Currency Discriminator machine and accessories provided passed strict safety requirements including FCC
approval, the European safety agency and approval and compliance to established environmental standards. Please
read the following instructions carefully before operating your machine and refer to them as needed to ensure the
continued safe operation of your machine.
Safety Precautions
When using the machine, these precautions must be always followed:
1. Never push objects of any kind onto your machine through the case or cabinet openings.
2. Do not use your machine near water, in any wet environment, or outdoor.
3. Do not allow anything to rest on the power cord, line cord, or PC interface cable. Do not locate your machine where
the cords can be damaged by persons’ walking on them.
4. Do not allow pets to chew on the power cord or PC interface cable.
5. Use supplies or cleaning materials only as directed. Keep all supplies and materials out of the way of children.
WARNING
Hazardous moving parts!
Keep fingers and other body parts away
4
6. The power supply turns this machine on and off. Make sure that your machine is installed near an outlet and is
easily accessible.
7. Never remove covers or guards that require a tool for removal. There are no operator serviceable areas inside your
machine. Refer servicing to authorized service personnel of AMROTEC® or AMROTEC® Authorized service
provider.
8. Never defeats interlock switches. This machine is designed to restrict operator access to unsafe areas. Covers,
guards and interlock switches are provided to ensure that the machine will not operate with covers opened.
Compliance Statement
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING CONDITIONS:
1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
5
Table of Contents
Chapter 1 Installation, Handling & Setting up ------------------------------------------------- 7
Chapter 2 Description of the Parts ---------------------------------------------------------------- 10
Chapter 3 Overview of Control Panel ------------------------------------------------------------ 11
Chapter 4 Overview of Display (LCD) ------------------------------------------------------------ 12
Chapter 5 Getting Started ---------------------------------------------------------------------------- 13
Placing Bills onto the Hopper ------------------------------------------------------------- 13
Counting -------------------------------------------------------------------------- 14
Chapter 6 Basic Operation --------------------------------------------------------------------------- 15
Selecting Count Mode ------------------------------------------------------------------- 15
CF Detector On / Off --------------------------------------------------------------------- 17
ADD On / Off -------------------------------------------------------------------------- 18
Batch On / Off -------------------------------------------------------------------------- 18
Changing Display Contents ------------------------------------------------------------- 19
Grand Total -------------------------------------------------------------------------- 21
Selecting Currency -------------------------------------------------------------------------- 23
Dual User ----------------------------------------------------------------------------------- 23
Manual Entry ------------------------------------------------------------------------------- 25
Chapter 7 Set ‘MENU’ and its Parameters ------------------------------------------------------ 26
User Menu ------------------------------------------------------------------------------------- 26
1. Language Set ------------------------------------------------------------- 28
6
2. Counting Speed ------------------------------------------------------------------------ 28
3. Pocket Capacity ------------------------------------------------------------------------ 29
4. Setting ----------------------------------------------------------------------------------- 30
Lock Menu ------------------------------------------------------------------ 30
Beep --------------------------------------------------------------------------- 31
Custom Display Setting --------------------------------------------------- 32
Auto Start -------------------------------------------------------------------- 32
LCD Control ----------------------------------------------------------------- 33
Display Set ------------------------------------------------------------------ 33
Select First View ------------------------------------------------------------ 34
Dual User Set ---------------------------------------------------------------- 34
5. PC Interface ---------------------------------------------------------------------------- 35
6. Sensitivity Setting --------------------------------------------------------------------- 37
7. Parameter ------------------------------------------------------------------------------- 39
8. Set Special Func. ---------------------------------------------------------------------- 42
Chapter 8 Troubleshooting -------------------------------------------------------------------------- 45
LCD Error Messages --------------------------------------------------------------------- 45
Trouble Shooting --------------------------------------------------------------------------- 46
Chapter 9 Daily Maintenance ------------------------------------------------------------------------ 47
Chapter 10 Specification ------------------------------------------------------------------------------- 50
7
1 Installation, Handling & Setting up
Unpacking List
1. MIB-9 Counter 1 Unit
2. Bill Guide 2 pcs.
3. AC Power Code 1 pc.
4. MIB-9 User's Manual 1 pc.
5. Serial Printer Cable 1 pc.
Choosing a Location
To ensure trouble-free operation of your machine, place it on a flat, stable surface near your workstation.
Do not place your machine:
In direct sunlight.
Near heat sources or air conditioners.
In dusty or dirty environments.
Handling the Machine
When handling or moving the machine, do not lift with grasping the Reject Pocket. The picture shows how to lift the
machine correctly. Please refer to the pictures on the next page.
8
(X) (X)
(O)
Correct way to lift the machine
9
Setting Up Your Machine
Power Cord
Plug one end of the cord into the rear side of the machine and the other
end into a standard AC power outlet with a surge protector.
If you turn on the power switch, the machine will display software
version and checksum on the screen. A service call number (A/S NO,)
will also display if your service provider stored an A/S call No. on the
machine memory.
Printer
MIB-9 machine has a RS232 serial interface port which allows operator to
connect an external printer (only those are recommended by
AMROTEC®) to print out counting result. To connect printer to the
machine, follow the steps below:
1. Make sure that both the MIB-9 and the Printer are turned off.
2. Plug the cable of printer into the serial port of MiB-9.
3. Turn on the printer and then MiB-9.
CAUTION
If wrong port is used to connect your
Printer, turn off MiB-9 immediately to
avoid electrical shock. Turn on the
machine only after correct Port is
connected to the Printer.
10
2 Description of the Parts
Altri manuali per MiB-9
6
Indice
Altri manuali Amrotec Validatore di banconote
