●There are 10 languages for day of week: German, English, French,
Italian, Dutch, Spanish, Danish, Czech, Polish, Swedish
Note:
(1) All Setting mode will automatically exit in 15 seconds without any
adjustment
(2) For Time Zone: If you receive no RC-DCF frequency signal, the time zone
should be set to 0. Time Zone is used in countries which can received
the DCF frequency signal but the time zone is different from German
Time ( i.e. GMT+1).
(3) Alarm sound duration: there are two options available, “1 minute” and
“2 minutes”.
(4) Second only can be adjusted to 0.
4.3 Daily Alarm Function:
●Press “ MODE” button (B1) select to view alarm Time, “ALARM TIME”
flashes on the display
●When viewing the Alarm Time, hold “MODE” button (B1) for 3 seconds to
enter alarm time setting. Press “ ” (B2) or “ ” (B3) button to adjust
the alarm time. Press “MODE” button (B1) to confirm the setting.
4.3 Snooze Alarm Function:
●Press “ALARM ON/OFF” Button (B4) to activate or deactivate the alarm.
If the alarm is on, alarm icon " " appears on the display.
Slide alarm mode switch (B7) to select the daily alarm alerts in weekday
only from Monday to Friday or whole week from Monday to Sunday.
●Press “SNOOZE” (B6) button when alarm alerts. The alarm snoozes for
around 5 minutes, then it alerts again. “ ” flashes on the LCD during
the snooze time. This process can be repeated 7 times.
●Except “SNOOZE” button, press any buttons to stop snooze alarm.
Otherwise, base on the previous setting of alarm sound duration, the
alarm alerts for 2 minutes or 1 minute, then stops automatically.
5. Thermometer
●If the temperature is out of the measurable range, LL.L (beyond the
minimum temperature) or HH.H (beyond the maximum temperature) will
be shown on the LCD.
●If the humidity is lower than 20%, !will be shown on the LCD, and
display 99% when it’s higher than 99%.
6. Precautions
●The clock loses its time information when the battery is removed.
●Do not expose it to direct sunlight, heavy heat, cold, high humidity or
wet areas
●Never clean the device using abrasive or corrosive materials or products.
Abrasive cleaning agents may scratch plastic parts and corrode
electronic circuits
