Please, ensure the door is unlocked before you set the
code!
If the door is locked when you get the safe, please unlock it
with the user code or preset master rst!
I. Setting Master Code
The preset master code: 011223.
• Push the power switch from position "I"(on) to "O"(off) and
wait for 3 seconds. Then connect the power by pushing
the power switch from position "O"(off) to "I"(on). If there
is no power switch on the back cover, please remove the
batteries. Then press any key once and place the batteries
again.
• The display will read “SECURE” rst, then “GOOD”.
• Press “**”, the display will read “PROG”. After “PROG”
disappears, enter the preset master code “011223” and
conrm by “#”, the display will read “NEW”.
MASTER CODE SYSTEM
English
10
• After “NEW” disappears, enter your new code (6 digits) within 5 seconds, and then the display
will read “AGAIN”.
• After “AGAIN” disappears, enter your new code (6 digits) again within 5 seconds and conrm
by “#” , then the display reads “DONE”, which indicates the master code is successfully set.
• If the display reads” ERROR”, do over these steps.
• If you want to change the code, do over these steps again.
TIPS: Here we just take the code “456789” for an example, please choose your own
master code for security.
CAUTION!
• Do not set code into 941229, 922146,922149,621223.
• Always remember the new master code, or you will not be able to change it again.
II. For Emergency Use of Mater Code
• Enter the congured master code and conrm by
pressing “#”, the display will read “OPENED” and then
pull the panel, the door will be open.
• The master code is usually used in case of emergency
only. It means you may use this system only when you
forget your user code or lost your user bank card.
MASTER CODE SYSTEM
English
11
