Ananda D13 Manuale utente
Pagina 1van 51
DISPLAY
D13 and D13/U Manual
Pagina 2van 51
Inhoud
A. About the Manual................................................................4
B. Appearance and size..........................................................4
C. Product Functions...............................................................5
D. Bottom Definition ................................................................7
E. Installation...........................................................................7
F. Operation............................................................................8
G. Default Set........................................................................12
H. Wire harness.....................................................................14
I. Q&A ..................................................................................14
J. Quality commitment and warranty coverage.....................14
K. Error Codes.......................................................................15
A. Over deze handleiding......................................................16
B. Uiterlijk en afmetingen......................................................16
C. Productfuncties.................................................................17
D. Uitleg van de knoppen......................................................19
E. Installatie...........................................................................19
F. Werking.............................................................................20
G. Resetten ...........................................................................24
H. Draadboom.......................................................................26
I. Vraag en antwoord ...........................................................26
J. Kwaliteit en garantie .........................................................26
K. Foutcodes.........................................................................27
A. À propos de ce Manuel.....................................................28
B. Aspect et taille...................................................................28
Pagina 3van 51
C. Fonctionnalités du produit ................................................29
D. Définition bouton...............................................................31
E. Installation.........................................................................31
F. Fonctionnement................................................................32
G. Réglage par défaut............................................................36
H. Faisceau de câbles...........................................................38
I. FAQ...................................................................................38
J. Engagement qualité et protection de garantie..................38
K. Codes erreur.....................................................................39
A. Über das Handbuch..........................................................40
B. Aussehen und Größe........................................................40
C. Produktfunktionen.............................................................41
D. Tastenfunktionen..............................................................43
E. Montage............................................................................43
F. Betrieb...............................................................................44
G. Grundeinstellungen festlegen...........................................48
H. Verkabelung......................................................................50
I. F & A.................................................................................50
J. Qualitätsverpflichtung und Gewährleistung......................50
K. Fehlercodes......................................................................51
Pagina 4van 51
A. About the Manual
This Manual aims to help you to learn about installing and operating D13
and D13/U display.
B. Appearance and size
Material and Color
D13/U is 52.5mm*33.3mm, has 3 bottoms, compact size and simply UI. Including Double-layer PCB, nylon buckle inside, and ABS
shell. The material
of the shell allows normal using at temperatures between -20 ℃and 60 ℃,
and can guarantee good mechanical properties.
Illustration
Pic 2-1
Diagram (mm)
Pagina 5van 51
Pic 2-2
C. Product Functions
D13/U LCD display integrates a 2.4” multi-function screen, which supports 24V / 36V / 48V battery. It also integrates the headlight switch
function. The main functions of D13/ U are: (as shown in Pic 3-1 below)
◆TotalMileage;
◆Trip Mileage;
◆Current Speed
◆Light Status
◆Pas Level
◆Battery Capacity
◆Error Code
◆Mile/ Kilo Meter
◆Wheel Size
◆Riding Time
◆Walking Assistant
◆USB Current Limit:1A(D13U only)
USBPort for
D13U
Pagina 6van 51
Pic 3-1
DisplayArea
The entire area of the LCD screen is displayed when the meter is turned on. The design of each module in the meter display area
is very beautiful, convenient for customers to understand, the interface is simple and clear, and the customer can see at a glance.
As shown in Pic 3-2 below:
Correct Display
Pic 3-2
Pic 3-3
Mileage,Trip, AVG
and Max Speed
Speed, KMH and
MPH switch
Minus
PasOn/ off
Light; Error; Walking
Battery
Plus
Pagina 7van 51
D. Bottom Definition
E. Installation
Pic 4-1
Fix the display and bolt on the handlebar, adjust the proper angle of view, and screw on the bolt in an easy-to-manipulate position. Tighten
the screws to complete the installation.
Insect bolt on the handlebar
Tighten the screws to complete the installation
D13/U is equipped with 3 buttons. Including key, open key, minus key.
Minus
On/ Off
Plus
Pagina 8van 51
F. Operation
1.
Switch on/off
Press and hold the Switch on/off key for 1 second, turn on the display, and start the ebike system. In the working state, press and
hold the Switch on/off key for 2 seconds to turn off the system. In the off state, the display
no longer uses the battery's power supply, and the display's leakage current is less than 2μA. The operation process is as shown in
Pic 6-1:
Pic 6-1
2.
Turningon/off thelights and backlights
In the power-on state, long press the button for 2 seconds, the lamp will turn on, and the instrument backlight will be turned off; press and
hold the button for 2 seconds, the lamp will be off and the instrument backlight will be turned on. The operation process is as shown in Pic
6-2: (lights on)
Pic 6-2
Long press 1s to star;
long press 2 s to turn off
During working, long press 2s to turn
on light; long press 2 s to turn off
Pagina 9van 51
3.
Pas level and Walking Assistant Mode
In the power-on state, click the plus or minus button to switch the electric vehicle power-assisted gear position and change the motor
output power. The default output power range of the display is 0-5 pas or 0-9 pas (the pas range is adjustable). Press and hold the minus
button to release, it will start Walking Assistant mode, and the pas level becomes 0. Release the minus button to exit the Walking Assistant
mode. (return to previous pas) The Walking Assistant mode and pas level display are shown in Pic 6-3: (current pas 1 display and Walking
Assistant mode).
Pic 6-3
4.
Display UI
When the ebike starts, the circuit board transmits the speed value monitored by the vehicle speed monitoring device to the display for display.
When the speed sensor is working, the speed sensor sends the speed signal to the controller, and the controller adjusts the motor speed and
controls at the same time. The device will feed back the motor speed to the meter. Displayed by the display: real-time speed, total mileage
(ODO), single-mile (Trip), riding time (Time), maximum speed (MAX SPEED), average speed (AVG SPEED), power-assisted gear, power,
error code mode.
The current speed display, thespeed display unit has two types of display:
During working, press Minus to decrease pas,
and long press to start Walking Assistant Mode
Pas
Walking Assistant
During working, press Plus to add Pas, default
is 0-5
Pagina 10 van 51
Mile display and kilometer display, which can be set in the settings. (See Chapter 7 for the setting method.) The actual instrument speed
is displayed in only one unit. It is not possible to have two units at the same time.As shown in Pic 6-4: (Pic 6-4 is only for explanation)
Pic 6-4
The total mileage, single mileage, riding time, maximum speed and average speed can be switched and displayed. In the power-on state,
the above functions can be switched, and the display power-on defaults to the interface before thelast shutdown. To switch, press the key
for 0.5 seconds to enter the switch display selection of ODO->TRIP->TIME->MAX->AVG->ODO cycle. As shown in the following Pic 6-5
interface mode: (The current 83Km is the total mileage display, the other display is subject to actual.)
Pic 6-5
During working, short press on/off to show status of
Mileage, Trip, AVG and Max Speed. i.e. “83km” is
ODO
Current Speed, can switch between KMH and
MPH
Altri manuali per D13
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Ananda Monitor
