Andis Vida CTA-1 Guida di riferimento rapido

Item pictured may differ from actual product

El artículo ilustrado puede diferir del producto real

Il est possible que l’article sur la photo soit différent du produit réel

Use & Care Instructions

MODEL CTA-1

LITERATURE PACKET #04680

Please read the following instructions before using your new Andis

clipper. Give it the care that a ﬁne, precision built instrument

deserves and it will give you years of service.

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions

should always be followed, including the following:

Read all instructions before using the Andis Clipper.

DANGER: To reduce the risk of electric shock:

1. Do not reach for an appliance that has fallen into

water. Unplug immediately.

2. Do not use while bathing or in a shower.

3. Do not place or store appliance where it can fall or be

pulled into a tub or sink. Do not place in or drop into

water or other liquid.

4. Except when charging, always unplug this appliance

after use.

5. Unplug this appliance before cleaning, removing or

assembling parts.

WARNING: To reduce the risk of burns, fire,

electric shock, or injury to persons:

1. An appliance should never be left unattended when

plugged in.

2. This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

ENGLISH

3. Children should be supervised to ensure that they do

not play with the appliance.

4. Use this appliance only for its intended use as

described in this manual. Do not use attachments not

recommended by Andis.

5. Never operate this appliance if it has a damaged cord

or plug, if it is not working properly, if it has been

dropped or damaged, or dropped into water. Return

the appliance to an Andis authorized service station

for examination and repair.

6. Keep the cord away from heated surfaces.

7. Never drop or insert any object into any opening.

8. Do not use outdoors or operate where aerosol (spray)

products are being used or where oxygen is being

administered.

9. Do not use this appliance with a damaged or broken

blade or comb, as injury to the skin may occur.

10. To disconnect turn control to OFF then remove plug

from outlet.

11. Plug adapter cord directly into an AC outlet. Do not

use an extension cord.

12. Use of an adapter cord or plug not sold by Andis

may result in risk of fire, electric shock, or injury to

person.

13. Do not disassemble adapter cord or plugs. Incorrect

reassembly may result in a risk of electric shock or

fire. When repair is required, send or take it to an

Andis authorized service station.

14. The battery in this clipper is designed to provide

maximum trouble-free life. However, like all batteries,

it will eventually wear out. Do not attempt to replace

battery. When repair or replacement is required,

send or take it to an Andis authorized service station.

15. Batteries can be harmful to the environment if

disposed of improperly. Many communities offer

recycling or battery collection. Contact your local

government about disposal practices in your area.

16. WARNING: Never touch both terminals on clipper

with metal objects and/or body parts, as short

circuit may result. Keep away from children.

Failure to comply with these warnings could result

in fire or serious injury.

17. WARNING: During use, do not place or leave the

appliance where it is expected to be: 1) Subject to

damage by an animal, or 2) Exposed to weather.

18. This appliance contains batteries that are only

replaceable by skilled persons.

19. Oil blades frequently. Blades may become hot

during use.

20. Keep the appliance dry.

21. WARNING: For recharging the battery, use only the

detachable supply unit provided with this appliance.

22. This appliance is intended for trimming purposes

only.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

CHARGING CLIPPER

The 5V 2.4A AC adapter is only intended for use with Andis Model

CTA-1 lithium-ion clipper. Remove the clipper and AC adapter from the

carton. Plug the AC adapter into a 100-120V, 50-60 cycle AC outlet, or as

noted on the unit. Plug the USB-C connection adapter cord directly into

the receptacle on the back of the charging stand or at the bottom of the

SLOT

TAB

LINE UP PIN

ATTACHMENT COMB CLIPPING GUIDE

Description Clipping Direction Approximate Length of Cut

Fine Coarse

Standard Andis Blade

Set at Lowest Setting

With hair grain

Against hair grain

1/16" (1.6 mm)

1/32" (0.8 mm)

3/16" (4.8 mm)

1/8" (3.2 mm)

1/8" Attachment Comb With hair grain

Against hair grain

1/4" (6.4 mm)

1/8" (3.2 mm)

3/8" (9.5 mm)

1/4" (6.4 mm)

1/4" Attachment Comb With hair grain

Against hair grain

3/8" (9.5 mm)

1/4" (6.4 mm)

1/2" (12.7 mm)

3/8" (9.5 mm)

3/8" Attachment Comb With hair grain

Against hair grain

1/2" (12.7 mm)

3/8" (9.5 mm)

5/8" (15.9 mm)

1/2" (12.7 mm)

1/2" Attachment Comb With hair grain

Against hair grain

5/8" (15.9 mm)

1/2" (12.7 mm)

7/8" (22.2 mm)

5/8" (15.9 mm)

3/4" Attachment Comb With hair grain

Against hair grain

7/8" (22.2 mm)

3/4" (19.0 mm)

1-1/8" (28.6 mm)

1" (25.4 mm)

1" Attachment Comb With hair grain

Against hair grain

1-1/8" (28.6 mm)

1" (25.4 mm)

1-3/8" (34.9 mm)

1-1/4" (31.8 mm)

OIL

SLIDE

LIGHT

clipper. (Figure A). The clipper must be turned

OFF for the battery to charge. The light on the

clipper will fade in and out while charging. When

the clipper is fully charged, the light will stay ON.

The clipper has not been charged at the

factory. Please charge the clipper for

3-5 hours before FIRST use for maximum

performance. When battery is fully charged,

clipper can be used for up to 2 hours of

continuous run time. After first use, clipper

will fully charge in a minimum of 60 minutes.

FAILURE TO CHARGE

1. Make sure voltage is present at the wall outlet (confirm with an

appliance you know is working).

2. Make sure the clipper is turned OFF.

3. Check to make sure adapter cord is plugged firmly into clipper.

4. If failure to charge still exists, return clipper to Andis or an Andis

authorized service station for examination and repair or replacement.

CLIPPER INDICATOR LIGHTS

When the clipper is running in a cordless operation, a white clipper

indicator light (Figure B) means the battery has a strong charge. When the

light turns red, the battery level is low and should be recharged as soon as

possible. If the clipper automatically powers OFF, either charge in the

charging stand or plug in to cord to continue trimming. The clipper

automatically powering off protects the lithium-ion battery and is not a

malfunction. The clipper will resume normal operation when it is recharged

or plugged in to its power cord. The CTA-1 clipper, by design, will run at

full power until the battery is fully depleted. NOTE: If clipper

automatically powers OFF while in use, it may take 1-2 minutes to

resume normal operation after power cord is plugged in.

USING THE ATTACHMENT COMBS

(Some models do not have combs and sizes will vary by kit)

You can set the blades for a longer cut by using any of the attachment

combs made for your Andis clipper. The combs mount easily; simply slide

the cutter blade teeth into comb and slide the comb down. To remove,

simply slide off (Figure C). These attachment combs guide hair into the

blades and give you precise control of hair lengths. The length of trim is

indicated on the attachment comb. Use the chart to find the approximate

lengths of cut. Different blade angles in relation to the skin, thickness and

texture of the hair will vary the cutting length.

CLIPPER BLADE ADJUSTMENT

Your Andis adjustable clipper blade set is easy to adjust. From coarse to

fine cuts, all that is needed is an easy change of the adjustment lever with

your thumb.

USER MAINTENANCE

The internal mechanism of your clipper has been permanently lubricated at

the factory. Other than the recommended maintenance described in this

manual, no other maintenance should be performed, except by Andis

Company or an Andis authorized service station. To contact Andis

directly, please call our Customer Support Team at 1-800-558-9441 or

email us at [email protected].

BLADE TEMPERATURE

Due to the high speed nature of Andis clippers, please check for blade

heat often, especially on close cutting blades. If blades are too hot, dip the

blades only into Andis Blade Care Plus or apply Andis Cool Care Plus and

then Andis Clipper Oil.

CARE AND SERVICING OF YOUR ANDIS CLIPPER

BLADES

The blades should be oiled before, during, and after each use. If your

clipper blades leave streaks or slow down, it’s a sure sign the blades need

oil. Place a few drops of Andis Clipper Oil on the front and side of the

cutter blades (Figure D). Wipe excess oil off the blades with a soft, dry

cloth. Spray lubricants contain insufficient oil for good lubrication, but are

an excellent clipper coolant. Always replace broken or nicked blades to

prevent injury. You can clean the excess hair from your blades by using a

small brush or an old toothbrush. To clean the blades we suggest

immersing the blades only into a shallow pan of Andis Blade Care Plus

while the clipper is running. Any excess hair and dirt that has accumulated

between the blades should come out. After cleaning, turn your clipper off,

dry the blades with a soft dry cloth, and start clipping again.

If after cleaning, blades do not cut properly, a few, fine pieces of hair may

be trapped between the upper and lower blades. Remove the blade set

from the clipper (see “Mounting and Dismounting the Blade Set”). Hold

the blade set in one hand, and slide the blade from side-to-side to remove

any trapped hair or debris (Figure E).

MOUNTING AND DISMOUNTING THE BLADE SET

The blade set should be attached with the clipper turned OFF. When

removing the blade, turn the clipper off. Push the blade away from the

clipper with your thumb, and the blade will pop off (Figure F). To replace

or change the blade set, fit the black plastic tab on the blade set into the

notch located at the bottom of the clipper opening. Firmly push the blade

onto the clipper housing, and it will snap into place (Figure G).

IMPORTANT: Frequently remove accumulated hair from the cavity under

the blade set. Remove the blade set as described above and brush hair

from the cavity using a small brush, toothbrush or Andis Dry Care.

USE GUIDELINES FOR LITHIUM-ION BATTERIES

1. The lithium-ion battery included with your clipper does not develop a

“memory effect” like a nickel-metal hydride (NiMH), or nickel cadmium

(NiCd) battery. You can plug the adapter cord into the clipper at any

time for a full charge, or even use the battery before a charge cycle is

complete. Like most rechargeable batteries, lithium-ion batteries

perform best when used frequently.

2. For maximum battery life, store the clipper in a partially discharged

condition if the unit will be unused for several months.

3. Do not store clipper under 50°F or over 104°F. Do not expose clipper to

excessively damp conditions.

4. Avoid locating the clipper near heat vents, radiators, or in direct

sunlight. Optimum charging will result where the temperature is stable.

Sudden increases in temperature can result in the battery receiving less

than a full charge.

5. Many factors influence lithium-ion battery life. A battery that has

received heavy use or is more than a year old may not give the same

run-time performance as a new battery pack.

6. New lithium-ion batteries, unused for a period of time, may not accept a

full charge. This is normal and does not indicate a problem with the

battery or charger. The battery will accept a full charge after several

cycles of clipper use and recharging.

7. Disconnect the adapter cord from the AC outlet if extended periods of

non-use are anticipated.

BATTERY DISPOSAL

The product you have purchased contains a rechargeable battery. The

battery is recyclable. At the end of its useful life, under various state and

local laws, it may be illegal to dispose of this battery into the municipal

waste stream. Check with your local solid waste officials for details in your

area for recycling options or proper disposal.

FACTORY REPAIR SERVICE

When the blades of your Andis clipper become dull after repeated use, it

is advised to purchase a new set of blades available through your Andis

supplier or through an Andis authorized service station. If you wish your

clipper to be serviced as well, it should be carefully packed and mailed

either Parcel Post Insured, or U.P.S. to any Andis authorized service station.

To find an Andis authorized service station near you log on to

andis.com or contact our customer service department at

1-800-558-9441.

CAUTION: Never handle your Andis clipper while you are operating a water faucet, and

never hold your clipper under a water faucet or in water. There is danger of electrical

shock and damage to your clipper. Andis Company will not be responsible in case of

injury due to this carelessness.

ESPAÑOL

Lea las instrucciones siguientes antes de usar su nueva máquina de

corte Andis. Trate este aparato de precisión con el cuidado que se

merece y le brindará un excelente funcionamiento durante años.

PRECAUCIONES IMPORTANTES

Al usar un aparato eléctrico, siempre deben seguirse

ciertas precauciones básicas, que incluyen la siguiente:

Lea todas las instrucciones antes de usar la máquina

de corte Andis.

PELIGRO: Para reducir el riesgo de descarga

eléctrica:

1. Si un aparato se ha caído al agua, no trate de sacarlo.

Desenchúfelo inmediatamente.

2. No lo utilice al bañarse en una bañera o bajo la

regadera.

3. No coloque ni almacene el aparato donde pueda

caerse en una bañera o un lavabo, o ser halado

dentro de éstos. No lo coloque ni lo deje caer en

agua u otro líquido.

4. Excepto mientras se carga, siempre desenchufe este

aparato después de usarlo.

5. Desenchufe este aparato antes de limpiar, desmontar

o montar las piezas.

ADVERTENCIA: Para reducir el riesgo de

quemaduras, incendio, descarga eléctrica o lesiones a

las personas:

1. Un aparato nunca debe dejarse desatendido mientras

está enchufado.

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Andis Prodotto per la cura degli animali domestici

Andis

Andis Ultra MC-2 Manuale utente

Andis

Andis EC242 Manuale utente

Manuali Prodotto per la cura degli animali domestici popolari di altre marche

Schwinn

Schwinn Rascal Manuale utente

K&H

K&H Small Animal Manuale utente

SHOR-LINE

SHOR-LINE 006.3230.00 Manuale utente

Petsafe

Petsafe Stubborn Dog Receiver Collar Manuale utente

Datamars

Datamars OMNI MAX Manuale utente

Trixie

Trixie 24444 Manuale utente

Roverpet

Roverpet 30DDPP Manuale utente

SportDOG

SportDOG SD-105S-C Manuale utente

Staywell

Staywell 400 Series Magnetic Manuale utente

Dogtek

Dogtek Sonic Birdhouse Manuale utente

Togfit

Togfit Deluxe Trigger Lock Door Gate Manuale utente

Girafus

Girafus 227PA Manuale utente

ubbink

ubbink KoiFeeder Solar Manuale utente

ULTRACOM

ULTRACOM KOIRA-GPS Manuale utente

CADOCA

CADOCA Deuba 106911 Manuale utente

Dogtra

Dogtra RR Deluxe Manuale utente

Carson

Carson CONVERTIBLE PET YARD 2200 Manuale utente

Creative Cedar Designs

Creative Cedar Designs K-9 Kabin Manuale utente