Andonstar 246 Manuale utente
Digital Microscope 246 249
Users Manual (metal stand)
1
CONTENTS
Safety and maintenance .........................................................................................................................................................2
Specifications ............................................................................................................................................................................ 2
Package include ........................................................................................................................................................................3
Video demonstration .............................................................................................................................................................. 3
Buttons&Connection .............................................................................................................................................................. 4
Bracket installation .................................................................................................................................................................. 4
Bracket instructions ................................................................................................................................................................. 5
Quick Start ................................................................................................................................................................................. 5
How to choose lens ........................................................................................................................................................ 6
Digital zoom ....................................................................................................................................................................10
Save files to micro SD card ......................................................................................................................................... 10
Remote ............................................................................................................................................................................. 11
Settings ..................................................................................................................................................................................... 12
Trouble shooting ....................................................................................................................................................................12
Warranty ................................................................................................................................................................................... 13
2
Safety and maintenance
1. Please read this users manual carefully before using the device. It may cause permanent damage to the
device to not follow the operation guide listed in this manual.
2. This product contains tiny parts and components that are NOT edible. Please let children and teens use
this device under proper guide and supervise by adults. Disables, patients and people with allergy should
not use this product.
3. We do not recommend using this product outdoor. It is not waterproof, and can not be placed in
extreme environment: heat, high pressure etc.. Please keep and use it in safe, clean and dry
environment. Stay it away from oil, gas, water and corrosive potions. Storage method refers to other
electronic products, such as a computer.
4. Clean the lens when image goes blurry: cut the power supply firstly, wipe the lens with a soft clean
cloth moistened with alcohol, make sure the whole device is dry before power it on again. Users should
follow these steps for daily cleaning as well, remember to ONLY wipe the INSULATED part of the
monitor.
5. The screen of the monitor is very fragile, please use it with care. Do not drop, hard press or leave it
with sharp object. Hold the frame of the monitor to adjust its orientation. The monitor is not waterproof,
please clean it with soft and dry material.
6. Please be aware that this microscope is not for medical use.
Specifications
Video resolution
FHD1920X1080 30FPS; 1080P 1440X1080 30FPS；720P 1280X720
30FPS,
Video Format
AVI
Frame rate
Max 30fps
Magnification ratio
Lens A: 4.5-180x; Lens D: 450-510x; Lens L: 15-60x
（with3 times digital zoom)
Working Distance
Lens A: 12mm-320mm; Lens D: 4mm- 5mm; Lens L: 90mm-300mm
Photo resolution
Max 4032*3024 (12M)
Photo Format
JPG
Storage
Micro-SD card, up to 32G (not included)
Power supply
5V 2A and above
Stand size
20cm*18cm*33cm
Package include
Microscope, Metal stand, 3 Lenses(A,D&L), Slide holder, Remote,
Dimmer cable, Slides kit, Tweezers, Bug box
3
Package include
（P1 Package include）
①Microscope
②Metal bracket
③Lens A(has been fixed)
④Lens D
⑤Lens L
⑥Remote
⑦Dimmer cable
⑧Slide holder
⑨Slides kit
⑩Tweezers
⑪Bug box
（P1 Package include）
Video demonstration：
Please find the video demo from the link(Please type all letters properly capitalized)/QR code below,
①Product installation： ②How to choose different lens：
https://bit.ly/3rg8lTV https://bit.ly/3J2r0bN
4
Buttons&Connection
（P2 Buttons&Connection）
①Power on/off
②Mode/Menu
③Up/Digital zoom in
④Down/Digital zoom out
⑤OK/Start recording
⑥Take pictures
(while the device is recording)
⑦Remote signal receiver
(where you aim remote to)
⑧Focusing tube
⑨Lens fixing screws
⑩Reset
⑪USB port
⑫SD card slot
Bracket installation
Please see the attached installation diagram.
5
Bracket instructions
（P3 Bracket instructions）
①Secondary Bracket Lift
②Boom Arm
③Lower Limit Stop
④Monitor Fixing Screws
⑤Spot Lights
⑥Clips
⑦Boom Arm V-locker(lock the arm in vertical
direction)
⑧ Boom Arm H-locker(lock the arm in
horizontal direction)
⑧Spot Lights Interface
Quick Start
1. Connect the device to power supply as followed pic 4 to power on the microscope.
2. Press and hold the Power button (pic 2 # ① ) until the monitor lights up. (device may switch on
automatically when you power it on, and its totally normal)
*Trouble shooting
6
When the monitor image stops or froze, please pin the Reset hole (pic 2 #⑩) to reset the device first, then
power on the device again. (Reset hole is very tiny, located at the back of the monitor. You may need to
use the help of other tools with this process. All settings of the microscope will be back to factory setting
after this, but it won’t delete any files saved in memory card).
（pic 4 Connection）
How to choose lens
Lens L：
Working distance：90mm-300mm，
Magnification：15-60x（with3 times digital zoom)
Applications：circuit board observe, watch repair etc.
7
（pic 5 Go with lens L）
Steps：In pic 5 it marked out which parts of the microscope are involved to each step.
①Install and fix lens L to the bottom of the focusing tube.
②Bend the two goose-neck spot lights, make the field of view enough illuminated.
③Loose the Arm V-locker, locate the whole monitor part to a desire height (distance from the lens to the
specimen should be around 90mm to300mm), then fix the V-locker. In order to adjust object distance
more precisely, adjust the height of the secondary bracket. The shorter the object distance is, the bigger
magnification is.
④Turn the focusing tube to get a clear image. Turn it clockwise to zoom in and the other way to zoom
out.
Lens A：
Working distance：12mm-320mm，
Magnification：4.5-180x（with3 times digital zoom)
Applications: observe whole size or part of coins, stones/stamps collect, circuit
board observe etc.
8
（pic 6 Go with Lens A）
Steps：In pic 6 it marked out which parts of the microscope are involved to each step.
①Install and fix lens A to the bottom of the focusing tube.
②Bend the two goose-neck spot lights, make sure the light shines on the coin.
③Loose the Arm V-locker, locate the whole monitor part to a desire height (distance from the lens to the
specimen should be around 12mm to 320mm), then fix the V-locker. In order to adjust object distance
more precisely, adjust the height of the secondary bracket. The shorter the object distance is, the bigger
magnification is.
④Turn the focusing tube to get a clear image. Turn it clockwise to zoom in and the other way to zoom
out.
*In order to observe part of the coin, please lower the arm height to shorten the object distance, then
turn the focusing tube, get a clear image.
*Steps above can also be applied to observe plants, stones etc.
9
Lens D：
Working distance：4mm-5mm，
Magnification：450-510x（with3 times digital zoom)
Applications: Microscope slides etc.
（Pic 7 Go with lens D）
Steps：In pic 7 it marked out which parts of the microscope are involved to each step.
①Install and fix lens D to the bottom of the focusing tube.
② Place a slide on the slides holder and power on the slides holder. (goose-neck spot lights can not
provide proper illumination in this case, so leave them and use the same interface to power on slides
holder)
③Loose the Arm V-locker, locate the whole monitor part to a desire height (distance from the lens to the
specimen should be around 4mm to 5mm), then fix the V-locker. Since the focus range is very short in
this case, we recommend users to adjust the height of the secondary bracket instead, which is more
precisely. The shorter the object distance is, the bigger magnification is.
④Turn the focusing tube to get a clear image. Turn it clockwise to zoom in and the other way to zoom
out.
*Lens D’s magnification is quite big, which requires a short object distance. Meanwhile, any tiny
movement or shake of specimen would be displayed as huge on the monitor, which requires user to
operate very carefully and patiently.
Altri manuali per 246
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Andonstar Microscopio
Andonstar
Andonstar AD203 Manuale utente
Andonstar
Andonstar AD407 Manuale utente
Andonstar
Andonstar ADSM201 Manuale utente
Andonstar
Andonstar AD409-Pro Manuale utente
Andonstar
Andonstar AD108 Manuale utente
Andonstar
Andonstar AD409-Max Manuale utente
Andonstar
Andonstar ADSM302 Manuale utente
Andonstar
Andonstar ADSM201 Manuale utente
Andonstar
Andonstar AD409 Manuale utente
Andonstar
Andonstar AD206S Manuale utente
