Anker AnkerWork B600 Manuale utente
AnkerWork B600 Video Bar
USER MANUAL
English 01
Čeština 09
Dansk 17
Deutsch 25
Español 33
Suomi 41
Français 49
Italiano 57
Nederlands 65
Norsk 73
Język polski 81
Portugues do Brasil 89
Pусский 97
Svenska 105
Türkçe 113
日本語121
한국어129
简体中文136
繁體中文143
150
157
01 EN
What's Included
2
1
3 4
1. AnkerWork B600 Video Bar
2. USB-C to USB-C cable
3. Power adapter (1.5 m)
4. Power plug*
*Power plug may vary in different regions.
At a Glance
9
7
5 6
2 13 4
9
8
10
13
11 12
14
EN 02
1Camera 8Edge Light Touch Button
2Edge Light 9Speaker
3Privacy Cover 10 USB-A Port
4Brightness Adjusting Touch Bar 11 Data Port (USB 2.0)
5Microphone 12 Power Port
6LED Indicator 13 Adjustable Base
7Mute Touch Button 14 Tripod Thread
Assembling the Power Adapter
1. Align the groove of the plug with the pins on the power adapter.
2. Press and turn the plug clockwise to lock.
1 2
To remove the plug, turn it counterclockwise while pressing the push button.
03 EN
Setting Up the Video Bar
Option A: On Top of Your Monitor
1. Unfold the clip so it ts over the top of your monitor. For a secure t, adjust the
clip by pressing it against the back of your device.
2. Adjust the video bar up or down, or rotate it to the optimal position to frame.
• If the joint between the video bar and the clip is not tight enough, tighten
the screw with the built-in handle at the base or a at-blade screwdriver (not
provided).
Option B: On a Tripod on Your Desk
With the clip folded in, mount the video bar onto a tripod (not provided) with the ¼
inch thread.
Connecting to a Computer
1. Connect the video bar to a computer using the provided USB-C to USB-C cable
(or other Anker's USB-C to USB-C cable with a transfer speed of 480 Mbps and
that is less than 2 m long).
2. Connect the video bar to a power supply using the provided power adapter.
3. Open the software you want to use with the video bar.
• The LED indicator will turn blue when the video bar is in use by any instant
EN 04
communication software, such as Zoom.
• Plug-and-play support will allow your computer to instantly recognize the video
bar.
• If your computer does not instantly recognize the video bar, ensure correct
connection, try re-plugging the power adapter into the power port, or use a
different USB port on your PC.
• The USB-A port can only support Anker's wireless headphones with a USB
receiver. You can pair your headphones with the video bar for best experience.
• Do not connect the power adapter to the data port by mistake, otherwise the
LED indicator will ash red.
You may need to manually select AnkerWork B600 Video Bar for your PC system or
software.
A) Windows
• Audio:
Right-click on the sound icon > Open Sound settings > Choose your output device /
Choose your input device
• Microphone:
1. Go to Settings > Privacy > Microphone and turn on "Allow apps to access your
microphone".
2. Turn on each of the listed apps where you want to use the microphone.
• Camera:
1. Go to Settings > Privacy > Camera and turn on "Allow apps to access your
camera".
2. Turn on each of the listed apps where you want to use the camera.
B) macOS
05 EN
• Audio:
Go to System Preferences > Sound > Sound Effects / Output / Input
• Microphone:
1. Go to System Preferences > Security & Privacy, then choose Microphone from the
left side list.
2. Locate the app(s) you want to enable microphone access for and check the box
alongside that app name to enable microphone access for that application.
• Camera:
1. Go to System Preferences > Security & Privacy, then choose Camera from the left
side list.
2. Locate the app(s) you want to enable camera access for and check the box
alongside that app name to enable camera access for that application.
Controls
x1
Mute / unmute microphone Touch once
x1
Turn edge light on / off Touch once
Adjust brightness Slide
Open / close privacy cover Rotate
EN 06
LED Light Guide
Steady blue Camera on
Steady red Microphone muted
Flashing red
Incorrect operation:
Power adapter plugged into data port and USB-C
cable plugged into power port
Edge Light
• By default, the edge light is turned off and it will automatically turn on if
positioned at an angle of 135° or larger. Do not direct the edge light at the
camera for a long time to avoid camera damage.
• The automatic light adjustment can be enabled via AnkerWork software. This
feature allows the edge light to recognize human face's brightness level and
automatically adjust its brightness.
• You can manually adjust brightness and color temperature via AnkerWork
software.
135°
07 EN
Using AnkerWork Software
Download the AnkerWork Software from
software.ankerwork.com
Download the AnkerWork software to check product information, change light,
image, audio and video settings, adjust brightness and color temperature, update
rmware, and more.
Firmware upgrade: You will be informed when you connect the video bar with the
software if a new version of rmware is available. Ensure the video bar remains
connected to your computer until the rmware upgrade is completed. During the
upgrade, avoid any operation and ensure access to internet.
Specifications
Specications are subject to change without notice.
Input 5V 2 A
Resolution 2K@30fps; 1080P@30fps; 720P@30fps;
320x240@30fps
Field of View (FOV) 65° - 95°
Focus Type Automatic focus
Sensor 5 MP CMOS (1 / 2.7 in.)
Focus Distance 15 cm to 3 m
Maximum Video Frame Rate Up to 30fps in 2 K
Video Codec H.264, MJPEG, YUV
Microphone 4-mic array
Speaker 2 x 2W
Voice Pickup Distance 3 m
EN 08
Voice Algorithm AGC (Auto Gain Control), AEC (Acoustic Echo
Cancellation), ANC (Auto Noise Cancellation)
Color Temperature Range 2,900 K - 6,200 K
Supported Operating Systems
or Software
Windows® 7 or later *; macOS® 10.11 or later;
Skype for Business; Zoom; Google Meet; BlueJeans;
Cisco Webex; WeChat; Microsoft Teams; OBS
*For best results, Windows® 10 or later is
recommended.
Indice
Lingue:
