AnkerWork M650 Manuale utente
AnkerWork M650
Wireless Microphone
USER MANUAL
EN 01
What's Included 02
At a Glance 02
1. Transmitter 02
2. Receiver 03
3. Charging Case 03
Wearing 04
1. Wearing a Transmitter 04
2. Attaching a Windscreen 04
3. Changing a Transmitter Cover 05
Charging 05
1. Charging Your Microphone 05
2. Checking Battery Level 06
Powering On / Off 06
Pairing 07
Using Your Microphone 08
1. Connecting to a Phone 08
2. Connecting to a Camera 08
3. Connecting to a Computer 09
4. On-Board Recording 09
Receiver Screen Guide 10
1. Touch Control 10
2. Settings 11
Mute 12
AnkerWork Software 13
Firmware Update 13
Specifications 13
To watch a video on basic operations, scan the QR code or
visit this website: https://support.ankerwork.com/s/product/
a085g000004znm4AAA/ankerwork-m650-wireless-microphone
Table of Contents
EN 02
What's Included
Lightning Adapter
Transmitter x 2
Receiver
USB-C Adapter
Charging Case
USB-C Cable AUX Cable (TRS) Replaceable
Transmitter Cover × 2
Windscreen × 2 Travel Case
At a Glance
1. Transmitter
5
6
2
1
3
4
1Built-in microphone
2TRS input port
• Connect to a lavalier microphone or a windscreen.
3Back clip / clip magnet
4Charging pins
EN 03
5Multi-function button
• Press to mute / unmute microphone.
• Hold for two seconds to manually power on / off.
6LED indicator
2. Receiver
5 6 721 3 4
1Touchscreen
2Built-in hot shoe adapter
3Power button
• Press to lock / unlock the screen.
• Hold for two seconds to manually power on / off.
4Expansion port
• Connect to your phone using the provided adapter.
5Charging pins
6USB-C port
• Connect to a power supply.
• Connect to your computer as an external microphone.
7TRS output port
• Connect to your camera using the provided AUX cable.
3. Charging Case
21
1USB-C port
• Connect to a power supply.
• Connect to AnkerWork PC software.
2LED indicator
EN 04
Wearing
1. Wearing a Transmitter
21
Option A: Attach the transmitter to your clothes using the back clip.
21
Option B: Separate the back clip from the transmitter. The clip magnet can be used
to attach the transmitter.
2. Attaching a Windscreen
To reduce wind noise while recording, insert a windscreen into the TRS input port on
the transmitter.
EN 05
3. Changing a Transmitter Cover
21 21
To install a new cover, align it with the transmitter, and then turn the cover clockwise
to lock.
To remove the cover, turn it counterclockwise.
Charging
1. Charging Your Microphone
21
21
2
1
21
2
1
1. Place the receiver and transmitters in the charging case and close it.
2. Connect the charging case to the power supply by using the USB-C cable.
• The LED indicators on the charging case indicate the charging status.
LED Battery level during charging
≤25%
26%-50%
51%-75%
76%-99%
100%
EN 06
2. Checking Battery Level
Open the charging case, and the LED indicators will indicate the battery level.
LED Battery level
10%
10%-25%
26%-50%
51%-75%
76%-100%
Powering On / Off
Open the charging case, and the receiver and transmitters will automatically power
on within four seconds.
To power off, return the receiver and transmitters to the case and close it.
• The LED indicator on the transmitter indicates the current status.
EN 07
LED Status
Steady blue for one second Powered on
Light off Powered off
Flashing red slowly Low battery
• To manually power on or off, hold the button on the receiver or
transmitter for 2 seconds.
• The receiver and transmitters will automatically power off after 30
minutes if they are not being used and are not connected.
Pairing
The receiver and transmitters will pair with each other when powered on.
When disconnected, place the receiver and transmitters into the case and they will
pair automatically.
• The LED indicator on the transmitter indicates the current status.
LED Status
Flashing blue rapidly Pairing
Steady blue Connected
Flashing blue slowly Disconnected
EN 08
Using Your Microphone
1. Connecting to a Phone
21 3
Your microphone can record and transmit audio to a phone. To connect the receiver
to the phone:
1. Align the adapter with the groove on the receiver.
2. Turn the adapter clockwise to lock.
3. Plug the adapter into your phone.
• Your iPhone speaker cannot output sound when connected to the
receiver. Please use Bluetooth headphones or speaker instead.
• Stereo mode and safe mode are not supported when using the
lightning adapter. In this case, only mono mode is available.
• To monitor your audio while recording, plug your headphones into
the receiver's TRS output port.
• To increase headphone volume, select on the receiver's screen.
See "Settings" in this manual.
• Selecting may distort recordings when the lightning adapter is
used. In this case, select to check audio, and then return to for
nal recording.
2. Connecting to a Camera
21
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
