Annso RMB-15 Manuale utente
User Manual
7U 15 inch Rack Mount Display Monitor
Options :
- AV, S-video input
- Touchscreen
Rack Mount Display Monitor
RMB-15
< Part. 3 > Options
3.1
Touchscreen
P.7
< Part. 2 > Specifications / OSD
2.1 Product Specifications
2.2 On-screen Display Operation ( OSD )
P.4 - 5
P.6
< Part. 1 > RMB-15
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Installation
Contents
P. 1
P.1 - 2
RMB-
■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
4
< 1.1 > Package Content RMB-15
P. 1
< Part 1 >
RMB-15 unit X 1
- 1.8 M VGA cable X 1
- Power cord X 1
< 1.2 > Structure Diagram
- 1.8 M DVI cable X 1
- 1.8 M Audio cable X 1
Front view
Basic I/O : DVI + VGA + Audio w/ speaker
Options : AV , BNC , S_Video , touchscreen & DC power
2
1
3
1 LCD PANEL
2 LCD OSD
3 Handle
4Mounting bracket
I/O bracket
Rear view
AV AUDIO VIDEO
PC AUDIO
TOUCH
VGA DVI
BNC S-video
Power sw
( optional ) ( optional )
AC100~240V
50~60Hz
( optional )
3
4
4
5
5
< 1.2 > Dimension
P. 2
Model Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
480 x 60 x 311 mm
620 x 210 x 440 mm
7.5 kg
10 kg
RMB-15
P.3
< 1.3 > Rack Mounting Installation
1
Mount the RMB-15 display panel with M6 screw set
Step
M6 screw sets are not provided.
4 x M6 screw set are required
2
Step
90° tilt adjustment while mounted in rack: +45°~-45°
LCD
Panel
Manufacturer
Panel Size ( diagonal ) 15-inch TFT color LCD
Display pixel ( dots x lines )
Brightness ( typ. ) 450
Contrast Ratio ( typ.)
Color
Viewing Angle ( H/V )
Response Time ( ms )
Dot pitch ( mm )
Display Area ( mm )
Surface treatment
Surface hardness 3H
Backlight Type LED
Video
Connectivity
Digital
Analog VGA Analog 0.7Vp-p
Composite ( RCA ) NTSC & PAL
S-Video ( 4-pin ) NTSC & PAL
Plug & Play VGA VESA EDID structure 1.3
Audio
Connectivity
Speaker
Power Power Supply Range Auto-sensing 100 to 240VAC,
50 / 60Hz
< 2.1 > Product Specifications
P.4
< Part 2 >
RMB-15
Regulatory Safety FCC & CE certified
Environmental RoHS2 & REACH compliant
CHIMEI INNOLUX
700:1
1024 x 768
16.7M
160/140
16
0.297(W) x 0.297(H)
337.92(W) x 270.336(H)
Synchronization VGA Separate, Composite & SOG
GLARE
DVI
Audio Input Connector 3.5mm stereo jack
Impedance / Power level 30kΩ/ 750mV
Dual Stereo Speaker 2W x 2
DVI-D, TMDS single link
Environmental
Conditions
Operating Temperature 0 to 55°C degree
Humidity 20~90%, non-condensing
Altitude 16,000 ft
Storage / Non-operating Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
Applicable
Format
P.5
Physical
Specification
Product ( W x D x H ) 480 x 60 x 311 mm
Packing ( W x D x H ) 620 x 210 x 440 mm
Net Weight
Gross Weight
7.5 KG
10 KG
DVI-D / VGA Input PC Signal 1920 x 1080 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
P.6
< 2.2 > On-screen Display Operation ( OSD ) RMB-15
Auto
Menu/Enter
(VGA mode)
■USB touchscreen package includes 2 x 1.8 M USB cable, quick reference guideline and CD disc
■For detailed information, please refer to the attached CD disc
■As the touchscreen unit is not made of toughened glass, please handle it carefully
< 3.1 > Options : Touchscreen
Model TRB e-Resistive TCB e-Capacitive
Technology 5-Wire Resistive Capacitive
Touch Point Single Single
Method Stylus or Finger Finger
Activation Force ≤50g / Stylus=R0.8 ≤50g
Durability 10 million touches 300 million touches
Response Time 15 ms 20 ms
Optical Transmittance 80% ± 3% 87% ±2%
Surface Hardness 3H 9H
Haze 8% ± 3% 7%
Glass 3.2 ±0.2 mm 2.8 mm ±10%
Connector USB Type A
Compatibility Windows 7 / XP / Vista, Linux
P.7
F21" USB Touchscreen Specification
< Part 3 >
Indice
