ANPVIZ HK Series Manuale utente

User

Manual

EN / DE / FR / ES / IT Version

Network Dome Camera

HK Series

Thank you very much for choosing ANPVIZ.

Our products are supported by the world's ﬁrst video monitoring manufacturers.

and they have adopted military level of protection.

It is our top priority to ensure your data safety and offer you a satisfactory service.

We strongly recommend that you set up an appropriate password for your device and save it

also set up security questions and reserved email to ensure you can reset password by yourself.

If you have any questions, please feel free to email us at support@anpvizsecurity.com

Or visit https://www.anpvizsecurity.com/download/

Please download Client software and user manuals from our download center

https://www.anpvizsecurity.com/downloadcenter.html

- 1 -

The Manual includes instructions for using and managing the product Picture, charts,

images and all other information hereinafter are for description and explanation only.

The information contained in the Manual is subject to change, without notice, due to

ﬁrmware updates or other reasons. Please ﬁnd the latest version in the company

website. Please use this user manual under the guidance of professionals.

About this Manual

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT

SHALL BE WHOLLY AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY

RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER

DAMAGES RESULTING FROM CYBER ATOCK, HACKER ATTACK VIRUS

INSPECTION, OR OTHER INTERNET SECURITY RISKS HOWEVER, OUR

COMPANY WILL PROVIDE TIM ELY TECH NIC AL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT

LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO

ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. OUR COMPANY

SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH

ILLEGITIMATE PURPOSES.IN THE EVENT OF ANY CONFLICTS BETWEEN THIS

MANUAL ANDTHE APPLICABLE LAW, TH E LATER PREVAILS.

FCC Information

Please take attention that changes or modiﬁcation not expressly approved by the party

responsible for compliance could void the users authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

Legal Disclaimer

Regulatory Information

- 2 -

- 3 -

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the

receiver Is connected.

—Consult the dealer or an experienced radio/TV technician for help.

EU Conformity Statement

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions:

1. This device may not cause harmful interference.

2.This device must accept any Interference received. Including Interference that may

cause undesired operation

This product and - if applicable - the supplied accessories too are marked

with ( £ 'CE' and comply therefore with the applicable harmonized European

standards listed under the Low Voltage Directive 2015/35/EU, the EMC

Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be

disposed of as unsorted municipal waste in the European Union. For proper

recycling, return this product to your Local supplier upon the purchase of

equivalent new equipment or dispose of it at designated collection points.

For more information, please see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste In the European Union. See the

product documentation for speciﬁc battery information. The battery is marked

with this symbol which may Include lettering to Indicate cadmium (Cd),

lead (Pb), or mercury (Hg). For proper recycling, return the battery to your

supplier or to a designated collection point For more Information,

please see: www.recyclethis.info.

Safety Instruction

These instructions are Intended to ensure that user can use the product correctly to

avoid danger or property loss. The precaution measure is divided into “Warnings” and

"Cautions"

- 4 -

Warnings: Serious Injury or death may occur if any of the warnings are neglected.

Cautions: Injury or equipment damage may occur if any of the cautions are neglected.

Warnings: Follow these safeguards to

prevent serious injury or death.

Cautions: Follow these precautions to

prevent potential injury or material damage.

Warnings

• Proper conﬁguration of all passwords and other security settings is the responsibility of

the installer and/or end-user.

• In the use of the product you must be in strict compliance with the electrical safety

regulations of the nation and region. Please refer to technical speciﬁcations for detailed

information.

• In put voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited

Power Source with 100~240 SC or 12 VDC according to the IEC60950-1 standard.

Please refer to technical speciﬁcations for detailed information.

• Do not connect several devices to one power adapter as adapter overload may cause

over-heating or a ﬁre hazard.

• Please make sure that the plug is ﬁrmly connected to the power socket

• If smog odor or noise rise from the device, turn off the power at once and unplug the

power cable, and then please contact the service center.

Cautions

• Make sure the power supply voltage Is correct before using the camera.

• Do not drop the camera or subject it to physical shock,

• Do not touch senor modules with ﬁngers. If cleaning Is necessary, use clean cloth with

a bit of ethanol and wipe it gently. If the camera will not be used for an extended period,

replace the lens cap to protect the sensor from d lit

• Do not aim the camera at the sun or extra bright places. Blooming or smearing may

occur otherwise (which Is not a malfunction), and affect the endurance of sensor at the

same time.

• The sensor may be burned out by a Laser beam, so when any Laser equipment is in

using, make sure that the surface of sensor will not be exposed to the laser beam.

- 5 -

• Do not place the camera In extremely hot, cold (the operating temperature shall be

-30°C to +60°C, or -40"C to +60*C if the camera model has an "H1 in its sufﬁx), dusty or

damp Locations, and do not expose it to high electromagnetic radiation.

• To avoid heat accumulation, good ventilation is required for operating environment.

• Keep the camera away from liquid while In use.

• While in delivery, the camera shall be packed in its original packing, or packing of the

same texture.

- 6 -

Figure 1-1 Figure 1-1 Camera Overview

Type I:

Table 1-1 Camera Description

No.

Description

1 Mounting Base

2 Panning Adjusting Bracket

3 Front Cover

4 Power Cord

Network Cable

6 IR LED

7 Lens

8 Black Liner

9 Safety Rope

1. Appearance Description

- 7 -

2. Installation

● Make sure the device in the package is in good condition

and all the assembly parts are included.

● The standard power supply is 12 VDC or PoE. Make

sure your power supply matches with your camera.

● Make sure all the related equipment is power-off during

the installation.

● Check the speciﬁcation of the products for the installation

environment.

● Make sure that the wall is strong enough to withstand

four times the weight of the camera and the bracket.

For the camera that supports IR, you are required to pay attention

to the following precautions to prevent IR reﬂection:

● Dust or grease on the dome cover will cause IR reﬂection.

Do not remove the dome cover ﬁlm until the installation is

ﬁnished. If there is dust or grease on the dome cover, clean

the dome cover with clean soft cloth and isopropyl alcohol.

● Make sure that there is no reﬂective surface too close to

the camera lens. The IR light from the camera may reﬂect

back into the lens to cause the reﬂection.

● The foam ring around the lens must be seated ﬂush

against the inner surface of the bubble to isolate the lens

from the IR LEDS. Fasten the dome cover to camera body

so that the foam ring and the dome cover are attached

seamlessly.

Before you start:

- 8 -

2.1 Installation

For camera models that support memory card as local storage,

you can follow the steps to mount and unmount the memory

card.

Steps:

1. Loosen the screws on the bubble. Remove the bubble to

expose the memory card slot.

Figure 1-1 Remove Bubble

Notes:

● In case of losing, screws on bubble cannot be screwed out

thoroughly.

● The bubble is fastened to the camera with a safety rope, and

DO NOT pull the rope to remove the bubble. Otherwise, the

camera will be damaged.

- 9 -

2. Find the memory card slot to insert the memory card.

Figure 1-1 Insert Memory Card

3. (Optional) To unmount the memory card, push to get it ejected.

2.2 Ceiling Mounting

Step:

1. Paste the drill template to the desired mounting place.

2. Drill the screw holes on the ceiling according to the drill

template.

Altri manuali per HK Series

Indice

Altri manuali ANPVIZ Telecamera di sicurezza

ANPVIZ

ANPVIZ HK Series Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente