ANSMANN POWERBANK 8.0 WIRELESS Manuale utente
73mm
18mm
153mm
MICRO USB
Input: 5V/2.1A
TYPE C
Input: 5V/3A
Output: 5V/2.1A
LED capacity status indicator
LED wireless charge output LED wireless power output
POWER button
Output: 5V/2.1A
WIRELESS
Output:
5V/0.9A
WIRELESS
Input: 5V/1A
ANSMANN AG MOBILE ENERGIE
POWERBANK 8.0 WIRELESS
MANUAL
Deutsch | English | Français | Español | Português
Italiano | Nederlands
1700-0098
GB - FOREWORD
Dear Customer,
Many thanks for choosing an ANSMANN POWERBANK. The operating
instructions will help you to get the best from the functions of your
new external rechargeable battery pack. We hope you enjoy your new
product. Your ANSMANN Team
SAFETY INSTRUCTIONS
Read the operating instructions carefully before use and observe
the safety instructions.
Please disconnect your device from the ANSMANN POWERBANK if
you are not using it.
In order to prevent any risk of fire or electric shock, the ANSMANN
POWERBANK must be protected from moisture and rain!
The product can be damaged by impacts, shocks or being drop-
ped, even from low heights. Handle the product carefully!
Do not expose the device to intense heat or leave it in direct
sunlight!
Never open the product or attempt to carry out repairs yourself!
Product safety is impaired by modifications or alterations to the
product. There is a risk of injury!
This product is not to be used by persons (including children)
who have restricted physical, sensory or mental capabilities or
who do not have adequate experience and knowledge in handling
this product. Such persons must be instructed beforehand by a
supervisory person who is responsible for their safety or must be
supervised during the use of the device!
Failure to observe the safety instructions can result in dangerous
injuries to persons or damage to the POWERBANK or the connec-
ted devices!
If you have questions, please contact your local dealer or our
service department.
USE
> CAPACITY DISPLAY
Press the power button to check the energy remaining.
4 blue LEDs illuminate: 75% - 100%
Deutsch | English | Français | Español | Português
Italiano | Nederlands
3 blue LEDs illuminate: 50% - 75%
2 blue LEDs illuminate: 25% - 50%
1 blue LED illuminates: 1% - 25%
No LED illuminates: The POWERBANK is completely discharged.
Please charge the POWERBANK immediately. If the POWERBANK
will be unused for an extended period of time, it is necessary to
charge it before storage in order to avoid the rechargeable bat-
tery being damaged.
> CHARGING THE POWERBANK
MICRO USB
Insert the Micro-USB plug of the USB cable into the Micro-USB socket
on the POWERBANK and the USB plug into the USB port on a computer
or a USB charger.
TYP-C
Insert the type-C plug of the USB cable into the type-C socket on the
POWERBANK and the USB plug into the USB port on a computer or a
USB charger.
WIRELESS
Place the Powerbank on a Qi or Qi-compatible charger. Ensure that it is
correctly positioned.
The charge process starts automatically. During the charge process,
up to 4 blue LEDs indicate the charge progress. After the charge
process is complete, all 4 blue LEDs illuminate steadily.
> CHARGING DEVICES
The Powerbank has various facilities for charging a device, e.g. a
Smartphone.
USB / TYPE C
Use the USB cable supplied (provided that the Micro-USB plug fits your
mobile device) or the original charge cable for your device. The Power-
bank likewise has a type-C output. Please use a suitable type-C cable
for this. Insert the USB plug of the cable into the POWERBANK and the
other end into your device. The charge process starts automatically
via the type-C connection. Please note that you must press the power
button to start the charge process via the USB port.
Deutsch | English | Français | Español | Português
Italiano | Nederlands
WIRELESS
Wireless charge output is activated by pressing the power button. This
is indicated via the red power LED. Place your Qi-capable device on the
Powerbank. The charge LED illuminates in green as soon as the device
is charged. The red power LED extinguishes during the energy transfer.
While the Powerbank is being wirelessly charged, all outputs are
automatically deactivated until all charge connections for charging
the Powerbank have been removed.
When charging the Powerbank via USB / type C, simultaneous charging
of your end-device is possible with restrictions. Please note that the
power of the outputs will be reduced here.
Simultaneous charging of multiple end-devices is possible with res-
trictions. This depends on the total charge current required.
Please disconnect your device from the POWERBANK once the charge
process is complete. The POWERBANK switches off automatically if it is
not charging a device.
The POWERBANK may heat up a little depending on the charge/
discharge current.
TECHNICAL DATA
1. Cell type: Li-Po rechargeable battery pack
2. Capacity: 8000mAh | 29.6Wh
3. Input: Micro-USB: 5V | 2100mA
Type C: 5V | 3000mA
Wireless: 5V | 900mA
4. Output: USB: 5V | max. 2100mA
Type C: 5V | max. 2100mA
Wireless: 5V | max. 1000mA
5. Accessories: Charge cable (USB to Micro-USB)
6. Operating temperature: 0°C to +25°C
7. Charge time: Micro-USB: ca. 4h
Type C: ca. 3h
Wireless: ca. 8h
8. Protective functions: Over-charging protection, deep discharge
protection, overload protection
9. Display: LED display
Deutsch | English | Français | Español | Português
Italiano | Nederlands
ENVIRONMENTAL INFORMATION
The device should not be discarded in the normal household waste
under any circumstances. Dispose of the device via an authorised
disposal centre or your municipal waste disposal facility. Observe the
current applicable regulations. Contact your waste disposal facility
in the event of any doubt. Dispose of all packaging materials via an
environmentally friendly disposal facility.
LIMITATION OF LIABILITY
The information contained within these operating instructions can be
changed without prior notification. ANSMANN accepts no liability for
direct, indirect, incidental or other damage or consequential damage
arising though improper handling or through disregard of the informa-
tion contained within these operating instructions.
GUARANTEE INFORMATION
The device has a three-year guarantee. The guarantee does not apply
to damage to the device arising through a failure to comply with the
operating instructions.
Subject to technical changes. We assume no liability for printing
errors. 10/2017
FR - AVANT-PROPOS
Chère cliente, cher client,
Nous vous remercions d‘avoir choisi une BANQUE DE PUISSANCE d‘ANS-
MANN. Le présent mode d‘emploi vous aidera à utiliser de manière
optimale les fonctions de votre accu supplémentaire. Nous vous
souhaitons beaucoup de satisfaction lors de l’utilisation de votre nou-
veau produit. Votre équipe ANSMANN
CONSIGNES DE SÉCURITÉ
Avant la mise en service, lire soigneusement le mode d‘emploi et
respecter les consignes de sécurité.
Veuillez séparer votre appareil de la BANQUE DE PUISSANCE ANS-
MANN lorsque vous ne l‘utilisez pas.
Afin d‘exclure le risque d‘incendie ou le risque d‘un choc élec-
trique, protéger la BANQUE DE PUISSANCE ANSMANN contre l‘humi-
dité et la pluie !
Deutsch | English | Français | Español | Português
Italiano | Nederlands
Altri manuali per POWERBANK 8.0 WIRELESS
1
Indice
Altri manuali ANSMANN Accessori
ANSMANN
ANSMANN POWERBANK 10.0 Manuale utente
ANSMANN
ANSMANN POWERBANK 10.8 Manuale utente
ANSMANN
ANSMANN POWERBANK 2.4 Manuale utente
ANSMANN
ANSMANN POWERBANK 7.0 Manuale utente
ANSMANN
ANSMANN POWERBANK 15.0 Manuale utente
ANSMANN
ANSMANN POWERBANK 7.0 Manuale utente
ANSMANN
ANSMANN POWERBANK 5.4 Manuale utente
ANSMANN
ANSMANN STYLUS TOUCH 4IN1 Manuale utente
ANSMANN
ANSMANN Powerbank 20.8 Manuale utente
ANSMANN
ANSMANN POWERBANK 8.0 WIRELESS Manuale utente
ANSMANN
ANSMANN 10.4 Manuale utente
ANSMANN
ANSMANN POWERBANK 4.0 Manuale utente
ANSMANN
ANSMANN POWERBANK 12.8 Manuale utente
ANSMANN
ANSMANN POWERBANK 20.0 Manuale utente
ANSMANN
ANSMANN LASERPOINTER 2iN1 Manuale utente
ANSMANN
ANSMANN AG Manuale utente
ANSMANN
ANSMANN POWERBANK 20.8 TYPE C Manuale utente
ANSMANN
ANSMANN POWERBANK 5.4 TYPE C Manuale utente
ANSMANN
ANSMANN POWERBANK 24.0 Manuale utente
