Antari FT-50 Manuale utente

FT-50 Fire Training

Smoke Generator

User Manual

!"#$%&'( ( )( ( *+,"-,%&( ( )( ( ./01&2'(

34546(7"1,+%(8%#'1%"#(,"9(!::/21&(819;(

User Manual - English

Safety Information

Please read the following safety information carefully before operating the

machine. This information includes important safeguards about installation,

usage, and maintenance. Pay attention to all warning labels and instructions in

this manual and printed on the machine.

If you have questions about how to operate the machine safely, please contact your local

Antari dealer for help.

․ Keep this device dry.

․ Always connect to a grounded circuit to avoid risk of electrocution.

․ Before connecting machine to power, always check the voltage indicated on machine

matches your local AC voltage. Do not use the machine if the AC power voltage does

not match.

․ Disconnect the machine from AC power before servicing and when not in use.

․ This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled,

disconnect the AC power and clean with a damp cloth. If fluid is spilled onto electronic

parts, immediately unplug the machine and contact your local Antari dealer for advice.

․ No user serviceable and modifiable parts inside. Never try to repair this product, an

unauthorized technician may cause damage or malfunction to the machine.

․ For adult use only. Never leave the machine running unattended.

․ Install the machine in a well-ventilated area. Provide at least 50 cm of space around the

machine.

․ Never add flammable liquid of any kind to the machine.

․ Make sure there are no flammable materials close to the machine while operating.

․ Only use Antari aerosols. Other aerosols may lead to heater clog or malfunction.

․ Remove aerosols after use.

․ If the machine fails to work, unplug the machine and stop operation immediately.

Contact your local Antari dealer for advice.

․ Before transporting the machine, make sure the aerosols is removed

․ Fog fluid may present health risks if swallowed. Do not drink fog fluid. Store it securely.

In case of eye contact or if fluid is swallowed, immediately look for medical advice.

Unpacking and Inspection

Immediately upon receiving the machine, carefully unpack the carton, check the content to

ensure that all parts are present and have been received in good condition. If any parts

appear damaged or mishandled from shipping, notify the shipper immediately and retain the

packing material for inspection.

What is included: 1 x FT-50 Fog Machine

1 x Power Cord

1 x User Manual

Product Dimensions

346 mm

251 mm

152 mm

Product Overview

Operation

Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm

open space around the machine.

Step 2: Ensure that there aren’t any foreign objects obstructing the threaded aerosol insert.

Align aerosol valve with threaded insert and carefully turn clockwise to fix into position.

Aerosol should be screwed in tightly to create an effective seal

Volume Control Knob

Power Switch

LED Indicator

Breaker

Power Input

Aerosol Compartment

Step 3: Connect the machine to a suitably rated power supply. To determine the power

requirement for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatly 7.5 mintues.

Once the machine has reached operating temperature, the LED inidcator located in back

panel will turn solid green. Now the machine is ready for operation.

Step 5: To start making fog, press and hold the push button on handle bar, release to stop.

Step 6: To adjust output volume, rotate the knob located in back panel. Turn

counter-clockwise to increase, clockwise to decrease.

Step 7:To turn off the machine, flip the power switch to OFF position. Remove aerosol and

power cord.

Off Power Operation

FT-50 can be operating off the main power once it has reached working temperature. The

amount of smoke can be produced depends on its temperature cycle when it is

disconnected. With a complete heating cycle the machine can still generate smoke up to 45

minutes after disconnection.

The quality of fog must be carefully observed while operating off the reserved power. When

smoke has become thin and blue indicates the temperature is getting low. Reconnect

machine to power for heating process, once it reached working temperature it can be

operate off power again.

FT-50 might eject fluid when working temperature is not reached.

Aerosols

Only use Antari FLP-700 aerosol for the FT-50 Fire Training Fog Machine.

The machine is tested and calibrated with this aerosol to get the best

output performance. Warranty will be voided if any other type of aerosol is

used, improper use of aerosol may lead to machine failure and

malfunction.

Service and Maintenance

․ Do not allow the machine to become contaminated.

․ Remove dust from air vents with air compressor, vacuum or a soft brush.

․ Only use a damp cloth to clean the casing.

․ Before storing run distilled water through the system to help avoid condensing the pump

or heater.

․ It is recommended to run the machine on a monthly basis in order to achieve best

performance and output condition.

․ Excessive dust, liquid, and dirt built up will degrade performance and cause

overheating.

Breaker Reset

Disconnect AC power before resetting the breaker. Only replace fuse with same

type and rating.

Step 1: Disconnect AC power.

Step 2: Flip breaker to ON position.

Step 3: Turn on machine for testing.

Breaker

120V = 15A 250V

230V = 8A 250V

Technical Specifications

- Input voltage

- Rated power

- Warm-up time

- Fluid consumption

- Compatible fluid

- Ambient temp. range

- Control

- Connection

- Dimension

- Weight

US model : AC 100-120V, 50 / 60Hz 12A

EU model : AC 220-240V, 50 / 60Hz 6A

1450W

7.5 minutes (approx.)

110 ml/min

Antari FLP-700 Aerosol

0 °C - 40 °C (32 °F-104 °F)

Manual

IEC (Power)

L346 W152 H251 mm

(L13.62 W5.98 H9.88 inch)

9.8 kg (21.61 lbs)

Mode d'emploi - Français

Notices de sécurité

En vue d'utiliser correctement votre nouvel appareil, veuillez lire attentivement ce

mode d'emploi. Pour assurer la longévité et le bon fonctionnement de votre

machine à fumée, veuillez lire attentivement les instructions suivantes

concernant le maniement, la sécurité et l'entretien. Veuillez suivre toute

instruction de sécurité appliquée sur le boîtier de votre machine à neige Antari.

Si vous avez des questions sur l'usage de la machine en toute sécurité, contactez votre

revendeur Antari.

․ Protéger de l'humidité.

․ Utilisez uniquement des prises de courant à terre à 3 broches.

․ Avant la première mise en marche, assurez-vous que l'appareil soit branché à

l'alimentation correcte. Ne jamais utiliser la machine quand la voltage n'est pas

correcte.

․ Débranchez l'appareil du secteur avant d'entretien ou quand vous n'utilisez pas la

machine.

․ L'appareil a été conçu pour un emploi dans des locaux clos. Protéger de l'humidité. En

cas de projection de liquide, débranchez l'appareil du secteur et nettoyez avec un

chiffon humide. Si du liquide devait pénétrer à l’intérieur de l’appareil, débranchez le

immédiatement et contactez un technicien ou votre revendeur Antari avant de le

réutiliser.

․ A l'intérieur de l'appareil, il n'y a aucune partie qui ait besoin d'être révisée. Ne jamais

essayer de reparer le produit parce quet détruire la machine.

․ L'usage de cet appareil n'est prévu que pour les adultes. Ne jamais faire marcher sans

surveillance.

․ Installez l'appareil à un endroit bien aéré. Pour garantir une aération suffisante, laissez

un espace libre de 50 cm tout autour de l’appareil.

․ Ne jamais mélanger des liquides enflammables gazeuz ou huileux avec le liquide à

fumée.

․ Respectez une distance minimum de 50 cm entre le bec de la machine et les matériaux

enflammables.

․ Employez uniquement bombes aérosols Antari. D'autres aérosols pourraient causer

des problèmes d'encrassage ou de crachotement.

․ Enlever la bombe aérosol après usage.

․ Si votre machine à fumée Antari ne devait plus fonctionner correctement, éteignez-la

immédiatement. S'il vous plaît contactez votre revendeur Antari.

․ Toujours retirer la bombe aérosol avant d’envoyer ou transporter la machine.

․ Ne jamais avaler le liquide à fumée. Stocker avec prudence. Si c’était tout de même le

cas, consultez un médecin immédiatement.

Déballage & inspection

Ouvrez le carton extérieur et assurez vous que toutes les pièces n'aient subi aucun

dommage durant leur transport. En cas de livraison endommagée ou incomplète, toujours

contactez immédiatement votre revendeur Antari.

Contenu de la livraison : 1 x FT-50 Machine à fumée

1 x Câble d'alimentation

1 x Mode d'emploi

Dimensions du produit

Descriptif du produit

Opération

Etape 1 : Positionnez la machine sur une surface plane avec au moins 50cm d’espace libre

tout autour.

Etape 2 : Examiner la machine et enlever tout object non-associé dans la filetage d'entrée.

Braquer la vanne d'aérosol avec la filetage et tourner doucement la vanne en sens horaire.

L'aérosol doit être fixé pour avoir un joint effectif.

346 mm

251 mm

152 mm

Régulateurs du volume

Commutateur d’alimentation

Indicateur de contrôle

Disjoncteur

Douille d'alimentation

Compartiment d'aérosol

Altri manuali per FT-50

Indice

Lingue:

Altri manuali Antari Macchina del fumo

Antari

Antari LCU-1 Manuale utente

Antari

Antari M-7 RGBA Manuale utente

Antari

Antari FT-200 Manuale utente

Antari

Antari Mobile MB-20 Manuale utente

Antari

Antari Fazer Z-300 Manuale utente

Antari

Antari HZ-300 Manuale utente

Antari

Antari W-715 Fog Jet Manuale utente

Antari

Antari M-1 Manuale utente

Antari

Antari X-310PRO Manuale utente

Antari

Antari FT-100 Fire Training Manuale utente

Antari

Antari FT-200 Manuale utente

Antari

Antari M-7 RGBA Manuale utente

Antari

Antari M-1 Manuale utente

Antari

Antari Z-800 III Manuale utente

Antari

Antari IP-1500 Manuale utente

Antari

Antari Z-3000II Manuale utente

Antari

Antari Z-3000II Manuale utente

Antari

Antari WiFi-800 Manuale utente

Antari

Antari M-8 Manuale utente

Antari

Antari FT-50 Manuale utente

Antari

Antari X FAZER Manuale utente

Antari

Antari F-2 Fazer Manuale utente

Antari

Antari Z-1200II Manuale utente

Antari

Antari B-100 Manuale utente

Manuali Macchina del fumo popolari di altre marche

Boost

Boost BOOST-FOG400LED-BK Manuale utente

Home Accents Holiday

Home Accents Holiday FM1000-ASH Manuale utente

EuroLite

EuroLite ZEITGEIST FOG-1200 Manuale utente

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Manuale utente

PROEL

PROEL DRAGO HEAVY PLFD150HY Manuale utente

Sparklyn

Sparklyn Y846 Manuale utente

Magicfx

Magicfx CO2 Gun Manuale utente

Ibiza

Ibiza LSM500LAS Manuale utente

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Manuale utente

High End

High End F-100 Manuale utente

Chauvet

Chauvet ARENA 2100 FLEX Manuale utente

Beamz

Beamz F1600 Manuale utente

Sagitter

Sagitter SG ARS900C Manuale utente

KISANKRAFT

KISANKRAFT KK-STF-480 Manuale utente

Orion

Orion OT-U250PP Guida

Beamz

Beamz S2500 Manuale utente

American DJ

American DJ Dyno-Fog II Manuale utente

JB Systems

JB Systems FX 1700 Manuale utente