Anviz CX3 Manuale utente
CX3
Fingerprint & Card Time Clock
Rev: 3 /2023
What’s Included
CX3 Terminal Quick Guide Optional Accessory Package
5V / 1A
Before Starting
Hardware Safety Instructions
Observe the following instructions to use the product safely and prevent any
risk of injury or property damage.
Do not use oily water or sharp objects to stain or damage the display screen.
Fragile parts are used in the equipment, please avoid operations such as falling,
crashing, bending or heavily pressing.
The optimal working environment of CX3 is indoor. The device function fully
under temperature: -10°C~50°C (14°F~122°F), The best performance is between:
15°C~32°C (59°F~89.6°F). The device will be less effective if exceeds these ranges.
Please gently wipe the screen and panel with soft materials. Avoid scrubbing
with water or detergent. The recommended power of CX3 terminal is DC 5V ~
1A. The device will function less effective in case the power supply cable
extends too long.
ANVIZ Terms & Policies
Before using all ANVIZ products, please read all applicable terms rules, policies
and usage provisions found at www.anviz.com/privacypolicy and
www.anviz.com/anviz-biometric-data-retention-policy.
By using your ANVIZ products, you agree to be bound by the ANVIZ Terms &
Policies.
1
1
FAT32 Format USB Drive for import and
export time attendance and employee
data (not provided).
2
Getting to Know the Product
What’s Request for Using
1. Mount the back board on wall and
connect with the wire.
2. Fix the device from the bottom and
screw it.
3. Make sure fixed OK.
How to Install
USB Drive
DC 5V
Fingerprint Sensor
Device
Menu Setup
Card Reader Area
Keypad
3.5”TFT Screen
2. Activate your CX3 Time Clock
3
2.1 Creat a Work Schedule
1. Plug your Time Clock into a power outlet to power on the terminal.
2. Choose your preferred language by the number key into the time setting.
3. Press ←/IN or OUT/→ keys and OK to set up the correct date and time.
4. Select the Set and press OK to save the time setting and move to the next
step.
The CX3 selects the Overnight option to support the scheduled shift, whose
employees work through midnight.
The default schedule is recommended for businesses whose employees often
work the same days and hours.
Please Press ←/IN or OUT/→ keys and OK to set up work schedule.
4
For Example :
The employees who all work from
8:00–17:00 and they all take a lunch break
from 12:00–13:00.
With these settings in place, an employee can simply make time for attendance.
Select the Set and press OK to save the time setting and move to the next step.
We recommended setting the time range of punch-in and punch out more
than the working time can get more accurate working hours for employee.
The Wotking Time 1:
IN ：Start : 07:00 and End : 12:00.
(Beginning of the shift )
OUT : Start : 12:01 and End : 13:00. (For
lunch out)
The Wotking Time 2:
IN : Start:13:01 and End : 17:00. (For lunch back)
OUT :Start :17:01 and End: 20:00. (End of the shift )
The CX3 time clock allows you to set up
to 3 different work times at which to
punch the shift.
Each Work Time with IN and OUT status.
and the Start Time and End Time of the
IN or OUT are used to set up the valid
punch time range.
For example:
Notice:
Punch Time at 7:30
Punch Time at 17:00 Early than 16:00 or Later 18:00
Early than 7:00 or Later 8:00
Valid Punch No Valid Punch
The employee punch in during 07:00 - 08:00, and punch out during 16:00-18:00.
The employee will be with valid working time.
2.2 How to creat a Normal Work Schedule
5
For Example :
The employees who all work from
23:00–06:00.
Select the Overnight option
Please make sure to set up the pay period
correctly, it will be used as a reference to
export time attendance reports from your
Time Clock devices.
Select the Set and press OK to save the
pay period setting and start your
application.
2.3 How to creat a Overnight Work Schedule
2.4 Setup Pay Period
The Wotking Time 1:
IN ：Start : 23:00 and End :23:59.
(Beginning of the shift )
OUT : Start : 06:00 and End: 08:00. (End of
the shift )
Monthly: the Monthly option,
Weekly: the Weekly option,
Bi-weekly: the Bi-weekly option,
Semi-monthly: the Semi-monthly option,
Default from 1st to 15th of the month and
16th and the last day of the month.
Start Date Of Payment: select the day on
which the pay period will start.
The start time and end time can not be set up with overlaps at midnight.
Select the Set and press OK to save the time setting and move to the next step.
Notice:
6
3. Quick Enroll Employee
1. Press M button on device menu by input the default Admin ID and Password.
2. Select “Enroll” option to enroll user fingerprint directly.
3. Input the unique identification number as User ID and press OK to create a
new User in the device. Press OK again to continue to enroll user fingerprint.
Please press the same finger on the sensor three times until register success.
The device will automatically continue to register another fingerprint. Press M
to exit the finger enrollment and return to the main menu.
With these settings, an employee’s fingerprint enrollment succeeds in the
device.
Default Admin ID: 0 Password: 12345
Add New User
Select the User icon to the user management interface.
Select Add to create a new user and input the user's basic information.
User ID: The User ID is required and
unique for each employee.
User Name: Press FN key to input the
name with characters. Characters length
less than 10 letters
User Password: Input the maximum 6
digits as password.
User Card: Swipe the RFID Card on the
device RFID Card read area,
it will display the RFID Card number in
the Card text bar.
Admin: select admin roles for the user.
Enroll FP: Starting enroll user fingerprint.
Mode: To set up employees' verify mode.
7
3.1 Management User
8
Modify User
Select Modify to edit the registered user. Input the registered user ID to modify
user information and the fingerprint template.
Delete User
Select Delete to user delete interface. Please input the user ID you want to
delete and press OK to delete the user continue to click Yes to confirm the
operation.
9
Delete all Users (Caution): Click Delete all Users. The device will ask for
confirmation, input the 12345 and confirm the operation to delete all users.
Search Use
Select Search and input the user ID in the upper left corner, and press OK for
user search.
Press directional keys to select the user and press OK to modify the user
information.
Indice
Altri manuali Anviz Orologio
