Anviz DAC844 Manuale utente
AIM-DAC System
1
Anviz Global Inc
DAC844
User Manual
AIM-DAC System
2
Anviz Global Inc
Notice and Disclaimer
This manual’s sole purpose is to assist installers and/or users in the safe and efficient
installation and usage of the system and/or product, and/or software described herein.
BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM, THE INSTALLER AND THE
USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY REQUIREMENTS
AND OPERATING PROCEDURES.
1The system must not be used for purposes other than those for which it was designed.
2The use of the software associated with the system and/or product, if applicable, is subject
to the terms of the license provided as part of the purchase documents.
3Anviz global.Inc and/or its related companies and/or subsidiaries’ (hereafter: "Anviz")
exclusive warranty and liability is limited to the warranty and liability statement provided in
an appendix at the end of this document.
4This manual describes the maximum configuration of the system with the maximum
number of functions, including future options. Therefore, not all functions described in this
manual may be available in the specific system and/or product configuration you
purchased.
5Incorrect operation or installation, or failure of the user to effectively maintain the system,
relieves the manufacturer (and seller) from all or any responsibility for consequent
non-compliance, damage, or injury.
6The text, images and graphics contained in the manual are for the purpose of illustration
and reference only.
In no event shall manufacturer be liable for any special, direct, indirect, incidental,
consequential, exemplary, or punitive damages (including, without limitation, any and all
damages from business interruption, loss of profits or revenue, cost of capital or loss of use
of any property or capital or injury).
7All graphics in this manual are for reference only, some deviation between the image(s)
and the actual product may occur.
8All wiring diagrams are intended for reference only, the photograph or graphic of the PCB(s)
are intended for clearer illustration and understanding of the product and may differ from
the actual PCB(s).
AIM-DAC System
3
Anviz Global Inc
Catalogue
1.1 Product feature ........................................................................................................................5
1.2 Product parameters ............................................................................................................6
2 Product Operation.......................................................................................................................7
2.1 Product Communication .....................................................................................................7
2.1.1 Net Work Communication wiring.............................................................................7
2.1.2 RS485 Communication .............................................................................................8
2.2 Product Interface.................................................................................................................9
2.3 Product Wiring ..................................................................................................................10
2.3.1 DAC844 Earth Wiring..............................................................................................10
2.3.2 Reader, Switch and Door Contact Wiring ...............................................................10
2.3.3 Lock connection .....................................................................................................11
2.3.4 RS485 Wiring ..........................................................................................................11
2.3.4 LED .........................................................................................................................12
3 DAC system Overview ...............................................................................................................13
3.1 Starting the Software ........................................................................................................13
3.2 Starting the Software ........................................................................................................14
3.3 Device Management .........................................................................................................15
3.3.1 Controller Operation ..............................................................................................15
3.3.2 Door Operation ......................................................................................................22
3.3.3 Time Zone...............................................................................................................25
3.3.4 Privilege..................................................................................................................28
3.3.5 First Card ................................................................................................................33
3.3.6 Multi Card...............................................................................................................37
3.3.7 Crontab...................................................................................................................40
3.3.8 Access Records .......................................................................................................41
3.4 User management..........................................................................................................42
3.5 Real Time Monitoring.....................................................................................................46
4 Initialization the Access Controller..........................................................................................49
5 Upgrade Firmware for DAC844 ...............................................................................................50
AIM-DAC System
4
Anviz Global Inc
1 Product Introduce
DAC844 is a simple and flexible access controller. It is based on TCP/IP communication. The
device adopts the latest PCB process design to make sure the working stable and reliable, meet
the different needs of the market.
The 20000 users and 200000 records huge storage capacity, meet the medium scale enterprise
access control requires. Support 4 standard Weigand26 readers input. Both with TCP/IP and
RS485 communication mode easily upgrade the access control without rewiring.
The DAC844 combine with Anviz intelligent management Distributed Access Controller system
（AIM-DAC system）. The DAC system is user-friendly, intuitive, and rich in functionality. Not
only support Anviz RFID product also with Anviz fingerprint products.
DAC844 Access control panel
AIM-DAC System
5
Anviz Global Inc
1.1 Product feature
DAC844 is a powerful and suitable for a wide range of access control solutions.
4 standard Wiegand 26 input for 4 doors
4 relays output directly control 4 locks (Maximum Current <5A)
TCP/IP network communication , RS485 communication (Baud Rate:115200bps)
Support Min USB port firmware upgrade
20000 Users and 200000 records capacity
4 Switching Signal input and 4 door contact input
Fire Alarm input for open the door
Duress open door and send alarm to system.
Pluggability connection pins flexible install and replace.
System Automatic Restoration (Watchdog)
If temporary the system in trouble by unusual interference (Noise, Shock and Inverse Current),
Watchdog function senses it automatically then the function lets system work correctly.
Anti-Pass back
Anti-Pass back rules can be applied to each access area to prevent one user's card or entry
code from being used for two subsequent entries, and to prevent a second entry without a
previous exit.
Door Interlock
Door Interlock sometimes referred to as Mantrap, prevents two or more related doors from
opening at the same time. It may be useful for the entry holes of Clean Rooms, or in other
facilities with two exit doors. It should only be possible to open one door at a time with a valid
user code. The Door Interlock must have door contact equipment.
First Card function
The First Card function is that the first card has especial privilege. After verified the first card,
the door will change status. The first card function needs setting the time and door status
before activate the first card function.
Multi Card Function
Multi Card Function is that before entering in an important area need verify different cards at
same time. The Multi Card function needs setting multi registered cards then upload the
privilege to the door.
Duress Open Door
This function is used to notice any case that the door has to be opened by force. In case of
duress, enter the Duress Password and <ENT> key before the normal access process then the
door will be opened as normal but the duress alarm is also generated at the same time and the
duress alarm output will send to the system.
AIM-DAC System
6
Anviz Global Inc
Crontab
Setting time, and at this time the door will change status automatically.
Real Time Monitoring
Monitoring user access records, Fire Alarm Record, Duress Open Door Record and Door Status
(Need door contact equipment)
1.2 Product parameters
Parameter Describe
Working Power 12V -4A
Max/Min Working Current Standby：86mA Max：560mA
Input 4 Switching Signals，4 door contacts
Relay 4 relays 12V 5A （NO NC COM）
LED prompt 22 LEDs
Communication TCP/IP，RS485（115200bps）
Working Temperature -10℃—50℃
Working Humidity 0-80%
Size 128*128*15mm (H*W*D)
Weight
AIM-DAC System
7
Anviz Global Inc
2 Product Operation
2.1 Product Communication
2.1.1 Net Work Communication wiring
TCP/IP Communication Mode
AIM-DAC System
8
Anviz Global Inc
2.1.2 RS485 Communication
RS485Communication mode
AIM-DAC System
9
Anviz Global Inc
2.2 Product Interface
NO. Describe NO. Describe
1 Power Input 7 4 Switching Signal Input
2 Min USB port (Upgrade firmware) 8 4 Door Contact Input
3 TCP/IP port 9 4 Relay Output (NO，NC，COM）
4 RS485 port (A+,B-,GND) 10 4 Readers Input
5 I2C Expand Port（） 11 Restart Button
6 Fire Alarm input Earth
AIM-DAC System
10
Anviz Global Inc
2.3 Product Wiring
Please follow below steps wiring with DAC844:
1Please make sure the DAC844 connect with Earth.
2Connect with Reader, Switch and Door Contact equipment
3Connect with Lock
4RS485 communication
5LED prompts
2.3.1 DAC844 Earth Wiring
Earth
2.3.2 Reader, Switch and Door Contact Wiring
Indice
Altri manuali Anviz Controllori
