AnyTone Hera Manuale utente
KNOW ABOUT THIS RADIO
1
Squelch control, SQ, ASQ switch key
2CH9
3
RF Gain control
4Scan key
5
Power On/Off Volume control
6
7
8
Function key
USER'S MANUAL
8
2
134
6
10
9
Hera
7
5
9External speaker Jack
10 Antenna Jack
AM/FM mode
Microphone connector
Downloaded from www.cbradio.nl
Squelch level control
ASQ control
Mode control
Short press
1.
SQ level, the bigger value stands for high squelch level.
Short press [
2. UP ] or [ DN ] to change SQ level.
Hold [
3. UP ] or [ DN ] can fast change SQ level.
Hold
4. or wait for 10 seconds to store and exit.
Hold
1. key, until LCD displays AQ, the ASQ function turned on.
Hold
2. or wait for 10 seconds to store and exit.
Short press
1. key to switch between AM /FM mode.
The LCD displays the selected mode.
2.
Channel Control
Short press [
1. UP ] or [ DN ] to change working channel.
Hold [
2. UP ] or [ DN ] can fast change working channel.
HOW TO USE THIS RADIO
Power On/Off the radio
Volume control
Turn VOL switch clockwise to power on the radio, the LCD displays the Norms
1.
and then displays channel number.
Turn VOL switch anti-clockwise, until hear Ka Ta, the radio is powered off.
2.
Turn clockwise to increase volume, anti-clockwise to decrease volume.
the bottom of the LCD displays SQ LEVEL
Note：When RFG function is on the LCD displays R, if RFG level is 6 means the
attenuation is 6dBm.
RF Gain control
Short press
1.
Short press microphone [
2. UP ] or [ DN ] to change level.
Short press
3. key to exit RF gain level control.
the buttom of the LCD displays RFG SET, the numbers in
up side is the current RFG level.
Note：In lock Mode all keys except PTT is valid.
Scan function
Emergency Channel
Keypad Lock
Norms control
Install external speaker
Resume factory default
Press
1. to start scan function, "SCAN" falshes in the LCD;
Press [
2. UP ] or [ DN ] to change scan direction during scan;
Press
3. or [PTT] key to exit scan function.
Choose wanted channel.
1.
Short press
2. key again to return to last normal channel.
Hold
1. key for over 2 seconds to lock the keys, LCD displays " ".
Hold
2. key for over 2 seconds again to unlock the keys.
Hold
1. to power on radio, until LCD displays the norms;
Press [
2. UP ] or [ DN ] to choose wanted norms;
Power off and power on again.
3.
Choose a 8Ω external speaker with 3.5mm mono connector.
Hold
1.
3.
Store Emergency Channel
Short press
1. key to choose CH9, the channel number ashes.
Hold
2. until the LCD display EMG, current channel stored as EMG channel.
SC
SC
F
to enter menu list.
Short press
2.
F
to choose RESETALL menu.
Hold
F
until LCD full display.
4. The radio automatically reseted.
Menu Operations
Hold
1.
3.
F
to enter menu list.
Short press
2.
RFG
to choose RESETALL menu.
4.
F
or
Short press microphone
UP
to choose wanted setting.
DN
or
Press
SC
or wait 10 seconds to store exit setting.
1BEEP
ON
OF
ON
2MICGAIN1~10
6
3SQLEVELOF，1~34
8
4ASQSET
OF
ON
OF
5SCANTYPE
SQ
TI
SQ
6HI‐CUT
OF
ON
OF
7TALKBACKOF，1~9
OF
8NB
OF
ON
OF
9RFGAINOF，3、6、9~60
OF
10ROGERBEEPOF，1~5
OF
11COLOR
REDGREEN
BLUE
CYAN
YELLOW
PURPLE
WHITE
12DIMMER1~6
6
13TOTOF，1~10Min
3
Default: RED
Function Setting details
Display
No.
Beep sound
Mic gain control
Squelch level control
ASQ level control
Scan type setting
Hi-cut setting
Talkback levelsetting
Noise blanker
RF gain level
RB sound setting
Backlight color setting
Backlight brighless
Time out timer
Default:
Default:
Default:
Default:
Default:
Default:
Default:
Default:
Default:
Default:
Default:
Level:
Level:
Level:
Level
Default:
Level:
:Squelch scan.
:Time scan
RECEIVER
Sensitivity Less than 1uV for 10dB(S+N)/N
Image Rejection 70dB
Adjacent Channel Rejection 60dB
IF Frequencies 1st 10.695MHz
2nd 455KHz
Automatic Gain Control(AGC) Less than 10dB change in audio
Output for inputs from 10 to 50000uV
Squelch less than 1uV
Audio Output Power 1Watts
Frequency Response 300-3000Hz
TRANSMITTER
Power Output 4 Watts FM/AM
Transmission interference inferior to 4nW(-54dBm)
Frequency Response 300-3000Hz
Modulated signal distortion inferior to 5%
Output Impedance 50 ohms
SPECIFICATION
GENERAL
Modulation Mode AM/FM
Frequency Range 26.965-27.405MHz
Frequency Tolerance ±5.0ppm
Input Voltage 13.2V
Dimensions 120x88x35mm
Weight 550g
Ferquency Control PLL Synthesizer
Operating Temperature
Range -20℃~ +50℃
Current Drain
Transmit 2A MAX
Receive Squelched 0.3A
VOL Max 0.8A
Antenna Connector UHF,SO-239
Indice
Altri manuali AnyTone Ricevitore per auto
