APART AUDIOSYSTEM8.8 Manuale utente

AUDIOSYSTEM8.8

Instruction manual

AUDIOSYSTEM8.8

Matrix systems

Safety information

• Please check the carton box for any kind of damage on

reception of the goods. In case of a damaged carton, please

contact your dealer before opening the carton.

• !!!! Danger !!!! Exposure to high sound levels may cause a

permanent hearing loss. Individuals vary considerably to sound

pressure level induced hearing loss but nearly everyone will

lose some hearing if exposed to high sound pressure levels

for a sufﬁcient amount of time. Therefore it is recommended

that all persons exposed to equipment capable of producing

high sound pressure levels, such as this device, be protected by

hearing protection while installing or operating this unit.

• Read all documentation before operating your equipment.

• Keep all documentation for future reference.

• Save the carton and packing material even if the equipment has

arrived in good condition.

• Should you ever need to ship the unit, use only the original

factory packing.

• Do not spill water or other liquids into or on the unit.

• Make sure power outlets are conform to the power

requirements listed on the back of the unit.

• Do not use the unit if the electrical power cord is frayed or

broken.

• Always operate the unit with the AC ground wire connected to

the electrical system ground.

• Do not connect the inputs / outputs of ampliﬁers or consoles

to any other voltage source, such as a battery, mains source, or

Instruction manual

AUDIOSYSTEM8.8

power supply, regardless of whether the ampliﬁer or console is

turned on or off.

• Power down & disconnect units from mains voltage before

making connections.

• Do not use the unit near stoves, heat registers, radiators, or

other heat producing devices.

• Do not operate equipment on a surface or in an environment

which may distort the normal ﬂow of air around the unit. If the

unit is used in an extremely dusty or smoky environment, the

unit should be periodically “blown free” of dust.

• Do not remove the cover. Removing the cover will expose you

to potentially dangerous voltages.

• Do not drive the inputs with a signal level higher than that

required to drive equipment to full output.

• Do not run the output of any ampliﬁer back into another input.

• In case of mal-function this device should be serviced by

qualiﬁed service personnel only.

• The apparatus may not be exposed to dripping or splashing and

no objects ﬁlled with liquids may be placed on the apparatus.

• The appliance coupler has to be readily operable to disconnect

the device.

Matrix systems

CAUTION: a clipped or distorted audio signal at the input (overload)

will come out as a clipped or distorted signal at the output,

regardless of the output level and DSP processing power applied

to the signal. Clipping occurs when the signal and/or the applied

gain is too high, due to incompatibility of the signal level, a faulty

source, an impedance mismatch or a human error. Therefore,

monitor incoming signals and do not overload the inputs. Adjust

the output level(s) and gain settings of your source(s) if necessary.

Due to the internal gain structure of the AUDIOSYSTEM, the output

signals may clip even when the input signals are relatively low. Do

not over amplify audio signals. Boosting certain frequency bands or

over compressing incoming audio signals may cause signal clipping,

distortion and excessive noise at the output. If you have to add lots

of gain, your incoming signal may be too weak.

NOTE: This is the out-of-the-box manual of your AUDIOSYSTEM8.8.

A full manual and GUI guide can be found on our website. If you

want customized conﬁgurations, adjustments and a total solution

for your speciﬁc application, please seek the online manual.

The apart-team hopes you enjoy our product. We enjoyed

developing this product and guarantee it will serve as a solution for

every kind of implementation.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER OR BACK

NO USER-SERVICEABLE PARTS INSIDE

SERVICING ONLY FOR QUALIFIED PERSONNEL

Caution

Instruction manual

AUDIOSYSTEM8.8

AUDIOSYSTEM8.8 is an audio matrix with 4 stereo line inputs, 4

stereo D-class ampliﬁed outputs and 2 stereo line outputs (copies

of ampliﬁed outputs). The AUDIOSYSTEM8.8 also has 4 stereo FM

RDS tuners built-in. Together with this the AUDIOSYSTEM8.8 has a

paging input and an emergency mute.

The unit may be controlled through our DIWAC wall panels and has

a built-in webserver for TCP/IP connection for system integration

and/or control through any mobile device or computer that has a

web browser installed.

General Description

Matrix systems

• Internal webserver GUI for conﬁguration and use

• TCP/IP

• Fixed architecture

• Stand alone operation

• Online upgradeable ﬁrmware

• Conﬁgurable mono/stereo zones

• 4 stereo unbalanced line inputs using RCA connectors

• 2 stereo unbalanced line outputs using RCA connectors

• 8 x 30 watts class-D ampliﬁer outputs (6 - 8 ohms)

• Up to 8 DIWAC wall controls (maximum 2 controls per output

zone)

• LED display for zone status overview

• Import / export function

• 8 integrated chimes

• Universal integrated switching power supply: 85-264 Vac /

47-63 Hz

• Removable 19” rack ears

Features

Instruction manual

AUDIOSYSTEM8.8

Out of box behavior

• 4 stereo inputs: AUX1 (1A & 1B), AUX2 (2A & 2B), AUX3

(3A & 3B) and AUX4 (4A & 4B).

• 4 stereo outputs: output 1 (1A & 1B), output 2 (2A &

2B), output 3 (3A & 3B) and output 4 (4A & 4B).

• Pushbuttons for source selection (AUX 1 - 4) and

+- for volume control (0 - 50).

• DIWAC 1A - 1B for output 1, 2A - 2B for output 2,

3A - 3B for output 3 and 4A - 4B for output 4

• Out of the box there are no FM presets conﬁgured but

they may be accessed and conﬁgured through the control

menu. The control menu in accessed by pressing +.

In the control menu it is possible to set EQ settings, set

default settings and do an FM scan.

Standard factory conﬁguration:

Input Conﬁguration:

Output Conﬁguration:

Wall panel(DIWAC) conﬁguration:

Matrix systems

Altri manuali per AUDIOSYSTEM8.8

Indice

Altri manuali APART Amplificatore

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente