Apex Digital AC7 Manuale utente
Table of Contents
Getting to Know Your Camera.......................................................1
Charging the Battery.............................................................1
Component Introduction.......................................................2
Inserting an SD Card............................................................ 4
Installing the Battery............................................................. 5
Installing Teleconverter.........................................................6
Getting Started.................................................................................6
Mode Menu............................................................................ 6
Date Settings......................................................................... 7
Video Mode............................................................................ 9
Photo Mode..........................................................................11
Play Back............................................................................. 14
Slide Show........................................................................... 15
Settings.................................................................................16
Connecting With Computer............................................... 17
Technical Parameters......................................................... 18
Troubleshooting................................................................... 19
1
Getting to Know Your Camera
Charging the Battery
1.Take out the USB cable and connect with camera.
2.Plug the charger into a 100-240V power socket.
3.The camera charging indicator is always on during charging
and the charging indicator is off when the camera is fully
charged.
2
Component Introduction
For the function description of the related parts in the above
figure, please refer to the following table.
No.
Name
Function description
①
IPS Panel
Screen preview and video/photo
playback. It supports 270°rotation.
②
Speaker
/
③
Power Button
Power On/Off
④
T/W Zoom
Button
In video/Photo Mode, pull left/
right to zoom in/out.
It also can be "Options" button
⑩
⑪
⑨
①
③
⑦
⑤
⑥
②
⑧
⑫
⑬
④
3
when choosing functions
⑤
Photo Button
In photo mode, press to take photo.
It also can be "OK" button when
confirming functions
⑥
Status Light
Charging indicator and working
indicator.
⑦
Recording Button
1.Recording/stop video.
2.Stop playback when the video is
Playing
⑧
I/O Interface
MIC: Access to an external
microphone;
HDMI：External HD Cable to
connect to TV;
USB interface：Access the USB
Cable to charge
⑨
Mode Button
Press to enter the mode menu
⑩
DISP Button
Press once to close the screen data
display;
Press twice to close the screen
preview
⑪
Menu Button
Press to enter the menu
⑫
LED Light Switch
Press to turn on / off the LED light
⑬
Built-in
Microphone
Recording sound
4
Inserting SD Card
1.Open the Battery cover.
2.Insert SD memory card in the direction shown
3.Close the Battery cover.
※Open the Battery cover and press the memory card.
Note:
1.The camera supports up to 128G SD card.
It is recommended to use U1 high speed memory
card.
2. Please insert SD memory card under shutdown
status.
3. Do not take out the memory card when the camera
is working, Otherwise the files will get damaged.
5
Inserting the Battery
1.Open the Battery cover.
2.inserts a lithium battery.
3.Close the battery cover.
Note：
1.Do not violently open the battery cover and remove
the battery.
2.The battery needs to be loaded into the battery
compartment in a correct direction.
6
Inserting Teleconverter
1.Take out the teleconverter and remove the protection cover
on both sides.
2.Screw the teleconverter with the camera lens
Getting Started
Mode Menu
1.Open the screen or press the "POWER" button to turn on the
camera.
2.On the standby interface, press the "MODE" button to enter
the following options.
7
3.Press “T/W” zoom button to choose mode options，press
"Photo" button to confirm selecting
Date settings
1.Open the screen or press the "POWER" button to turn on the
camera.
2.Press "MODE" button to select “Date”
3.Press "T/W " zoom button and press "Photo" to confirm
selecting.
4.Select the Date function and Set Date by pressing "T/W”
zoom button and pressing "Photo" button to confirm
selecting.
Note: The default boot mode is video mode.
8
5. Select the date and time by pressing "T/W " button and
pressing "Photo" button to confirm selecting.
6. After setting the date, press "MODE" button to return to
mode menu interface.
Indice
