User manual LP dynamic processor 2
SAFETY INSTRUCTIONS
This symbol alerts you to the presence of
un-insulated dangerous voltage inside
the enclosure –voltage that may be
sufficient to constitute a risk of shock.
This symbol wherever it appears, alerts
you to important operating and
maintenance instructions in the
accompanying literature. Read the
manual
CAUTION: To reduce the risk of electrical shock, do
not remove the cover (or back). No user serviceable
parts inside; refer servicing to qualified personnel.
WARNING: To reduce the risk of fire electrical
shock, do not expose this appliance to rain or
moisture.
INFORMATION ABOUT APPLIANCES SUPPLIED WITH POWER-CORD.
WARNING: APPLIANCE MUST HAVE GROUNDING
Cables are identified as follow: Green/Yellow Ground
Blue Neutral
Brown Phase
If colors of the power cable do not match with the cables’ color of the socket, please proceed as follow:
1Green/Yellow wire must be connected to the wire identified with E letter or the ground sign.
2 Blue wire must be connected to the black wire or to the wire identified with N letter.
3Brown wire must be connected to the red wire or the wire identified with L letter.
CONDUCTOR COLOR
STANDARD OTHER
L PHASE BROWN BLACK
NNEUTRAL BLUE WHITE
EGROUND GREEN/YELLOW GREEN
FOR YOU OWN SAFETY PLEASE READ BELOW:
Water and moisture:
The appliance should not be used near water.
Ventilation:
The appliance should be situated so that its location or
position does not interfere with its proper ventilation.
It should not be placed on a surface that may block the
ventilation openings, or a built-in installation that may
impede the flow of air through the ventilation openings.
Heat:
The appliance should be situated away from heat sources
(radiators, amplifiers, etc.) that produce heat.
Power source:
The appliance should be connected to a power supply
only of the type described in the operating instructions or
as marked on the appliance.
Grounding or polarization:
Precautions should be taken so that the grounding or
polarization means of an appliance is not defeated.
Power-Cord Protection:
Power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords and
plugs, convenience receptacles and the point where they
exit from the appliance.
Non-use Periods:
The power cord of the appliance should be unplugged
from the outlet when left unused for along time.
Object and liquid Entry:
Care should be taken so that objects do not fall and
liquids are not spilled into the enclosure.
Damage Requiring Service:
The appliance should be serviced by qualified service
personnel when:
-the power cord or the plug has been damaged; or
-objects have fallen, or liquid has been spilled into; or
-the appliance has been exposed to rain; or
-the appliance does not appear to operate normally or
exhibits a marked change in performance; or
-this appliance has been dropped, or the enclosure
damaged.
Servicing: The user should not attempt to service the
appliance beyond that is described in the Operating
instructions. All other servicing should be referred to
qualified service person.
DO NOT EXPOSE TO WATER OR HUMIDITY
WARNING: When no grounding exists, problems
may appear with the appliance or to the system
it is connected to in case of high tension
between casing and grounding. Serious injuries
or death could happen when simultaneous
contact occurs with case grounding and
