Applied satellite 9505 Docking Station Manuale utente

Installation General Use F.A.Q. Warranty

Troubleshooting

AppendixSafety

V2.1 [2013-1-14] 1

9505 / 9505A Docking Station

Contacts

Table of Contents

For additional information about this Product warranty, please contact your Service Provider or Point-of-

Sale. For additional information about ASE products and services, please contact ASE as follows:

Telephone: 480.443.1424

Facsimile: 480.452.0971

Website: www.ase-corp.com

E-mail: [email protected]

Mail: Applied Satellite Engineering, Inc.

16559 North 92nd Street, Suite 101

Scottsdale, Arizona 85260 USA

Preface / Overview ...................................................................................................................................................................................2

Safety Information ................................................................................................................................................................................3

Installation ..............................................................................................................................................................................................6

Disconnect and Stow Handset Antenna ................................................................................................................................................6

Latch Phone In Docking Station ............................................................................................................................................................6

Connect Audio and Charging Cables ...................................................................................................................................................6

Attach External Antenna ........................................................................................................................................................................7

Attach Power Input Jack .......................................................................................................................................................................7

Attach Analog Phone / PBX Interface ..................................................................................................................................................7

Attach Hands Free Audio Headset .......................................................................................................................................................8

Attach Serial Cable ................................................................................................................................................................................8

Attach DPL Digital Handset ...................................................................................................................................................................8

General Use ..........................................................................................................................................................................................9

Power On Messages ..............................................................................................................................................................................9

Making a Call - What You Will Hear .................................................................................................................................................11

Accessing Docking Station Settings ......................................................................................................................................................11

Calling With SmartDial ..........................................................................................................................................................................12

Connecting ............................................................................................................................................................................................12

911 Emergency Calls with SmartDial ...............................................................................................................................................................12

Calling Without SmartDial .....................................................................................................................................................................12

Temporarily Overriding SmartDial .........................................................................................................................................................13

911 Emergency Calls without SmartDial ............................................................................................................................................13

Answering a Call ..................................................................................................................................................................................13

Displays During a Call .........................................................................................................................................................................14

Making a Data Call .............................................................................................................................................................................14

Hardware Connection ...........................................................................................................................................................................14

Software Connection ............................................................................................................................................................................14

For Integrators Only .............................................................................................................................................................................15

Managing Your Phone Book ...............................................................................................................................................................15

Frequently Asked Questions [F.A.Q.] ..............................................................................................................................................16

Troubleshooting ...................................................................................................................................................................................17

Booting the System ..............................................................................................................................................................................17

Checking Signal Strength ....................................................................................................................................................................17

Antenna Cable Runs ............................................................................................................................................................................18

Installation and Startup Troubleshooting .............................................................................................................................................18

Warranty ................................................................................................................................................................................................19

Appendix ..............................................................................................................................................................................................21

AT Command Set .................................................................................................................................................................................21

XT Command Set .................................................................................................................................................................................23

Docking Station Initialization ................................................................................................................................................................24

Installation General Use F.A.Q. Warranty

Troubleshooting

AppendixSafety

V2.1 [2013-1-14] 2

9505 / 9505A Docking Station

Overview

Preface

Applied Satellite Engineering, a leader in the satellite communications, provides a unique solution for using your

9505/9505A Iridium satellite phone indoors and outdoors. Just dock your Iridium phone in our docking station

and you can access satellite communications with standard analog phone sets or your company’s PBX system.

When you need to leave the ofce, just un-dock your handset and take it with you. Never be out of touch again!

QUESTIONS

If at any time, you have questions or concerns about either the installation or operation of your Docking

Station, please visit www.ase-corp.com or contact us using the information located on the cover of this

manual.

Iridium 9505 / 9505A (not incl.)

Antenna Storage Clip

Roof mount Antenna Cable

Connected LED Indicator

Smartdial LED Indicator

Ringer LED Indicator

Latch Release Button

Charging Cable Connection

Audio Cable Connection

Power Input Jack

RJ11 Analog Phone / PBX interface

DB-9 Female RS-232C interface

Iridium DPL Handset

External Ringer

2.5mm Audio Jack (Hands Free)

A........

B........

C........

D........

E........

F........

G........

H........

I........

J........

K........

L.......

M........

N........

O........

Below is a breakdown of the features

and Interface points of your new Docking

station.

LM N O

Installation General Use F.A.Q. Warranty

Troubleshooting

AppendixSafety

V2.1 [2013-1-14] 3

9505 / 9505A Docking Station

Safety

PRECAUTIONS:

Please read and understand this User’s Manual before installing your Docking Station. Careless or incorrect

installation can degrade performance, damage both new and existing equipment, and incur unexpected

network airtime charges.

Safety Information

1. FAA Regulations

ASE products are not FAA-approved and are not intended for aircraft use.

2. Exposure to Radio Frequency Signals

Your Iridium-designed satellite unit is a low power radio transmitter and receiver. When it is ON, it receives

and sends out radio frequency (RF) signals.

International agencies have set standards and recommendations for the protection of public exposure to RF

electromagnetic energy:

• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996

• Verband Deutscher Elektrotechniker (VDE) DIN-0848

• United States Federal Commission, Radio Frequency Exposure Guidelines (1996)

• National Radiological Protection Board of the United Kingdom, GS 11, 1988

• American National Standards Institute (ANSI) IEEE C95, 1-1992

• National Council on Radiation Protection and Measurements (NCRP) Report 86

• Department of Health and Welfare Canada, Safety Code 6

These standards are based on extensive scientic review. For example, over 120 scientists, engineers,

and physicians from universities, government health agencies, and industry reviewed the available body of

research to develop the updated ANSI standard.

The design of your phone complies with these standards when used as described under “Unit Operation.”

3. Antenna Care

Use only the antenna supplied by your service provider or an approved replacement antenna. Unauthorized

antennas, modications, or attachments could degrade performance or damage the phone and may violate

local agency regulations.

4. Unit Operation

Do not operate the unit when a person is within 4 inches (10 centimeters) of the antenna. A person or object

within 4 inches (10 centimeters) of the antenna could impair call quality and may cause the unit to operate

at a higher power level than necessary and expose that person to RF energy in excess of that established

by the FCC RF Exposure Guidelines.

5. Driving

Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey

them. Observe the following guidelines when using your phone while driving:

•Give full attention to driving; driving safely is your rst responsibility.

•Use hands-free phone operation, if available.

•Pull off the road and park before making or answering a call if driving conditions so require.

Installation General Use F.A.Q. Warranty

Troubleshooting

AppendixSafety

V2.1 [2013-1-14] 4

9505 / 9505A Docking Station

Safety

Safety Information (Continued)

6. Electronic Devices

Most modern electronic equipment is shielded from RF signals. However, certain equipment may not be

shielded against RF signals from your Iridium-designed satellite unit.

7. Pacemakers

The Health Industry Manufacturers Association recommends that a minimum separation of 6 inches be

maintained between a wireless phone’s antenna and a pacemaker to avoid potential interference with the

pacemaker. These recommendations are consistent with the independent research by and recommendations

of Wireless Technology Research.

8. Other Medical Devices

If you use any other personal medical device, consult the manufacturer of your device to determine if it is

adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this

information.

Turn your unit OFF in health care facilities when any regulations posted in these areas instruct you to do so.

Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

9. Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles.

Check with the manufacturer or its representative regarding your vehicle. You should also consult the

manufacturer of any equipment that has been added to your vehicle.

10. Posted Facilities

Turn your unit OFF in any facilities where posted notices so require.

11. Blasting Areas

To avoid interfering with blasting operations, turn your unit OFF when in a “blasting area” or in areas posted

“Turn off two-way radio.” Obey all signs and instructions.

12. Potentially Explosive Atmospheres

Turn your unit OFF and disconnect the power supply when you are in any area with a potentially explosive

atmosphere. Obey all signs and instructions. Sparks from your battery or power source in such areas could

cause an explosion or re resulting in bodily injury or even death.

Areas with a potentially explosive atmosphere are not always clearly marked. They include, but are not

limited to: fueling areas such as gasoline stations; below deck on boats; fuel or chemical transfer or storage

facilities; areas where fuel odors are present (for example, if a gas/propane leak occurs in a car or home);

areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other

area where you normally would be advised to turn off your vehicle engine.

PERSONS WITH PACEMAKERS

• Should ALWAYS keep the Iridium-designed satellite unit more than six inches from their pacemaker

when the unit is turned ON.

• Should turn the unit OFF immediately if you have any reason to suspect that interference is taking

place.

Installation General Use F.A.Q. Warranty

Troubleshooting

AppendixSafety

V2.1 [2013-1-14] 5

9505 / 9505A Docking Station

Safety

Safety Information (Continued)

13. For Vehicles Equipped With Airbags

An air bag inates with great force. Do NOT place objects, including both installed or portable wireless

equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment

is improperly installed and the air bag inates, serious injury could result.

14. Important Notes for PBX System Users

If using the Docking Station with a PBX system, three precautions must be followed to prevent damage to

your unit.

1. The Docking Station functions as a central ofce (i.e., the Docking Station emulates the wall jack by

generating the high operating and ring voltages). Do not connect the Docking Station as an extension.

2. When connecting the Docking Station to the PBX, it needs to be connected as analog only. Connecting

the Docking Station as other than analog may result in damage to the RJ11 interface.

3. Do not try to ring the Docking Station as if it were an extension on the PBX system. The Docking Station

has a built-in ringer so that when a call is received, the unit will ring to alarm that a call is coming in. Trying

to ring the Docking Station unit from the PBX system could result in damage to the RJ11 interface.

Installation General Use F.A.Q. Warranty

Troubleshooting

AppendixSafety

V2.1 [2013-1-14] 6

9505 / 9505A Docking Station

Installation

To remove the antenna from the handset,

rotate downward and press the release

button on the top surface of the phone as

shown. Once separated, the antenna can

be stored in the clips on the left face of the

docking station.

NOTE:

The storage area for the handset antenna

serves no reception or electrical related

purpose. It is intended solely as a safe-storage

place for your antenna when not in use.

To Dock the Handset, align the bottom contacts

of the phone with the gold pins and “rock” the

top surface rearward as shown. Depress

the Antenna release latch to allow the Dock

to make a solid electrical and mechanical

connection with the antenna receptacle.

IMPORTANT:

The latched connection between the

handset and the dock is important for both

satellite reception and also for assuring

the handset cannot fall out of the docking

station.

Once fully docked, Connect the Audio

Interface Cable (Right) and then the

Charging Cable (Left) as shown (9505A

only).

NOTE

The cables are designed with a length to

prevent users from reversing the plugs.

The 9505 model does not have a charging

cable.

Docking your 9505 / 9505A Handset

The steps outlined below will be applicable to every installation and user of the 9505 / 9505A Docking station.

Disconnect and Stow Handset Antenna

Latch Phone In Docking Station

Connect Audio and Charging Cables

IMPORTANT:

If you are in doubt about the mounting options or the connectivity at any stage of this installation, please contact an ASE

representative for assistance. They will be able to guide you through your specic installation options more clearly.

Installation General Use F.A.Q. Warranty

Troubleshooting

AppendixSafety

V2.1 [2013-1-14] 7

9505 / 9505A Docking Station

Installation

The docking station accepts a male TNC

connector. Screw the antenna cable on to

the docking station and tighten securely.

IMPORTANT:

Do not exceed cable lengths outlined in

the troubleshooting section of this manual.

Keep cable splices to a minimum.

Align the pin pattern of the cord with the

receptacle and press the plug rmly in

place. Next twist the collar to “lock” the cord

in place. Next Firmly press the Power Cable

into the transformer as shown.

Common Wire Connections

Every installation is unique, and you may not need to make every accessory connection that you see outlined

on the following pages. However, the steps shown on this page are generally the most common and should

be read carefully.

IMPORTANT:

If you are in doubt about the mounting options or the connectivity at any stage of this installation, please contact an ASE

representative for assistance. They will be able to guide you through your specic installation options more clearly.

IMPORTANT:

The Lock collar on this cable should only

be tightened “nger-tight”. Do not use

pliers as this will overtightened the cable

and potential damage the connector

housing.

Connect your Phone line to the RJ-11 jack

as shown. The plug should be pressed into

the socket until an audible ‘click’ is heard,

indicating the plug is fully seated and locked

in position.

TO REMOVE:

Use your Finger to squeeze the small

plastic tab on the plug; this will “unlock”

the plug thus allowing for its removal.

Attach External Antenna

Attach Power Input Jack (Cigarette Lighter plug also included)

Attach Analog Phone / PBX Interface

Installation General Use F.A.Q. Warranty

Troubleshooting

AppendixSafety

V2.1 [2013-1-14] 8

9505 / 9505A Docking Station

Installation

Press the connector from your hands-

free headset into the Headphone jack as

shown.

NOTE:

2.5mm Plugs are standard in most hands-

free handsets but if needed, you can

purchase adapters at most electronics

stores.

Optional Wire Connections

The steps on this page may not be applicable to every installation, and should be considered optional.

Attach Hands Free Audio Headset (not included)

Attach the serial cable by rst aligning the

asymmetric pin pattern with the receptacle,

and then by pressing the plug into place

until it stops. Next hand-tighten both of the

thumb-nuts until snug.

IMPORTANT:

Though a screw driver slot is supplied on

most cords, it is unnecessary to torque

the thumb screws beyond “nger-tight”.

Attach Serial Cable

Connect your DPL Digital Handset to the

RJ-45 jack as shown. The plug should be

pressed into the socket until an audible

‘click’ is heard, indicating the plug is fully

seated and locked in position.

IMPORTANT:

This port uses a common RJ45 connector,

but it should be noted that it will not

support a connection to anything other

than a DPL Digital Handset. Additionally,

only one DPL handset is supported

Attach DPL Digital Handset (not included)

IMPORTANT:

If you are in doubt about the mounting options or the connectivity at any stage of this installation, please contact an ASE

representative for assistance. They will be able to guide you through your specic installation options more clearly.

Installation General Use F.A.Q. Warranty

Troubleshooting

AppendixSafety

V2.1 [2013-1-14] 9

9505 / 9505A Docking Station

Boot Animation

The Docking Station performs a self-test

while the handset initializes. The power

LED will be blinking during self-test

General Use

Refer to the instructions provided with your Iridium antenna to ensure proper placement. Clear line of sight to

the Iridium satellites is fundamental to satellite phone connectivity. Be sure the antenna will reach your desired

installation point inside your building. The Docking Station must be kept in a dry, climate-controlled space.

After the antenna is installed, simply connect the Docking Station to the antenna, attach an analog handset to

the Docking Station, insert your 9505-series handset and turn it off, connect the mini-plugs from the Docking

Station to the handset, and connect the power source to the Docking Station. Your unit automatically starts

when power is applied.

Before turning on your Docking Station, be sure that you have attached the

antenna and all peripherals you wish to use—telephone handset, modem

cable, etc. Connecting all peripherals rst will ensure that the Docking

Station recognizes them during boot-up. The Docking Station does not

have a power switch. Instead, simply plug or unplug the power adapter to

turn the unit on or off.

We recommend you watch your 9505A handset screen closely during

Docking Station boot-up. The messages displayed will help you troubleshoot

your system should it not provide a clear signal (or any signal at all).

Following are the boot messages, in sequence:

Power On Messages

TROUBLESHOOTING:

If your system fails during this step, refer

to the troubleshooting section for further

information.

Power On Messages (Continued)

Welcome Screen.

The handset is locating and connecting to the Iridium satellites.

TROUBLESHOOTING:

If your system fails during this step, check your antenna. Your docking station

cannot nd the Iridium satellites at all; refer to the troubleshooting section for

further information.

Power On Messages (Continued)

General Use

Installation General Use F.A.Q. Warranty

Troubleshooting

AppendixSafety

V2.1 [2013-1-14] 10

9505 / 9505A Docking Station

Searching Screen.

The handset is communicating with the Iridium network to establish its availability

to send and receive calls.

TROUBLESHOOTING:

If your system fails during this step, refer to the troubleshooting section for further

information.

Power On Messages (Continued)

Registered Screen.

The Docking Station has established a network connection to Iridium and is

downloading and synchronizing settings like time and date.

The docking station will sync with the handset upon handset registration with the

satellites. The power LED will stop blinking (will become continually lit) when sync

occurs successfully.

TROUBLESHOOTING:

If your system fails during this step, refer to the troubleshooting section for further

information.

Power On Messages (Continued)

Ready Screen

If the boot process is successful, the ready screen will appear and the power LED

will stop blinking (will become continually lit).

Lift your RJ-11 handset and you should hear dial tone. Your Docking Station is in

Ready Mode and you may now make and receive calls.

TROUBLESHOOTING:

If your system fails during this step, refer to the troubleshooting section for further

information.

Power On Messages (Continued)

General Use

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali applied satellite Stazione di attracco

applied satellite

applied satellite 9505A Docking Station Manuale utente

Manuali Stazione di attracco popolari di altre marche

Sony

Sony Dream Machine XDR-DS12iP Manuale utente

Acer

Acer USB Type-C Dock II Manuale utente

ATEN

ATEN UC-2000 Manuale utente

Xcellon

Xcellon HDD-202 Manuale utente

Dok

Dok CR09 Manuale utente

Philips

Philips BTM630/12 Manuale utente

IOGear

IOGear Travel Pro GUD3C09 Manuale utente

RKI

RKI SDM-E2 Manuale utente

iHome

iHome iP15 Manuale utente

VITURE ONE

VITURE ONE MOBILE DOCK Manuale utente

Lindy

Lindy 42984 Manuale utente

CipherLab

CipherLab 8001 Manuale utente

Pyle

Pyle PIPDSP2 Manuale utente

Avol

Avol AS2350 Manuale utente

Datalogic

Datalogic JoyaTouch Manuale utente

Philips

Philips DC190/79 Manuale utente

Targus

Targus DOCK315EUZ Manuale utente

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuale utente

applied satellite 9505 Docking Station Manuale utente

Manuali Stazione di attracco popolari di altre marche