Aqua Computer Multiswitch 1.41 Manuale utente

MULTISWITCH

Owner’s Manual

Owner’s ManualOwner’s Manual

Owner’s Manual

multiswitch™ 1.41

Firmware- ersion 1.06

OS- ersion 1.02

The information contained in this manual is subject to change without

Current as of: Juli 19th 2012

Gelliehäuser Str. 1, 37130 Gleichen

MULTISWITCH

Table of Contents

Table of ContentsTable of Contents

Table of Contents

1. Contents of package.......................................................3

2. Preface..........................................................................3

3. Safety precautions...........................................................4

4. Connecting external components......................................5

4.1. Overview.....................................................................................5

4.2. Power connector...........................................................................5

4.3. USB.............................................................................................5

4.4. aquabus (I2C-Bus)........................................................................6

4.5. Jumpers.......................................................................................6

4.6. Power outputs 1/2........................................................................6

4.7. LED-outputs.................................................................................7

4.8. Relay...........................................................................................8

4.9. aquastream..................................................................................8

5. Configuration.................................................................9

Jumper position 1: aquabus-address.....................................................9

Jumper position 2: Save configuration...................................................9

Jumper position 3: Deactivate PWM function .........................................9

Jumper position 4: Button function......................................................10

Jumper position 5: USB/aquabus........................................................10

6. Initial operation............................................................11

7. Further details...............................................................12

7.1. Changing the front plate..............................................................12

8. Technical Data.............................................................12

Gelliehäuser Str. 1, 37130 Gleichen

MULTISWITCH

1. Contents of package

1. Contents of package1. Contents of package

1. Contents of package

1x multiswitch™ (assembled)

1x internal USB-cable (5-pin), length approx. 70 cm

Mounting material

1x this manual

2. Preface

2. Preface2. Preface

2. Preface

Dear customer

Dear customerDear customer

Dear customer,

We congratulate you on the purchase of a multiswitch from Aqua

Computer. We are one of the oldest manufacturers in Germany of PC

water-cooling systems. Our products are made from materials of the

highest quality. We hope you enjoy your new cooling system. Should

you have any questions, we would like to ask you to first look at the

"FAQ" area and "forum" on our homepage www.aqua-computer.de. If

you should not find an answer to your question there, please email to

support@aqua-computer.de. Considering the fast technical

development, we reserve the right to be able to perform alterations to

the products at any time. It therefore is possible that your product does

not correspond precisely to the descriptions or especially the illustrations

in this manual.

Your Aqua Computer Team

Gelliehäuser Str. 1, 37130 Gleichen

MULTISWITCH

3. Safety precautions

3. Safety precautions3. Safety precautions

3. Safety precautions

Before we get into the specifics of the system, we would like you to

follow these basic precautions which should be obeyed at all times.

1. Read this manual thoroughly and completely!

2. Backup your data before working on the hardware!

2. Backup your data before working on the hardware!2. Backup your data before working on the hardware!

2. Backup your data before working on the hardware!

3. The aquaero may only be used completely assembled in a

3. The aquaero may only be used completely assembled in a3. The aquaero may only be used completely assembled in a

3. The aquaero may only be used completely assembled in a

computer case!

computer case!computer case!

computer case!

4. Never touch, connect or separate cables or electronic

4. Never touch, connect or separate cables or electronic4. Never touch, connect or separate cables or electronic

4. Never touch, connect or separate cables or electronic

components while in use!

components while in use!components while in use!

components while in use!

5. Do not turn on your computer unless you are absolutely certain

5. Do not turn on your computer unless you are absolutely certain5. Do not turn on your computer unless you are absolutely certain

5. Do not turn on your computer unless you are absolutely certain

that all cables are securely and correctly connected to the

that all cables are securely and correctly connected to thethat all cables are securely and correctly connected to the

that all cables are securely and correctly connected to the

aquaero!

aquaero!aquaero!

aquaero!

6. 6.

6. Maintenance notes:

Maintenance notes:Maintenance notes:

Maintenance notes: Use only soft, damp cloths to wipe the

Use only soft, damp cloths to wipe the Use only soft, damp cloths to wipe the

Use only soft, damp cloths to wipe the

device. Do not use benzene, paint thinner, detergents, or

device. Do not use benzene, paint thinner, detergents, ordevice. Do not use benzene, paint thinner, detergents, or

device. Do not use benzene, paint thinner, detergents, or

chemically treated wiped cloths, and do not place vinyl, plastic, or

chemically treated wiped cloths, and do not place vinyl, plastic, orchemically treated wiped cloths, and do not place vinyl, plastic, or

chemically treated wiped cloths, and do not place vinyl, plastic, or

rubber objects on the device to avoid the risk of malfunction or

rubber objects on the device to avoid the risk of malfunction orrubber objects on the device to avoid the risk of malfunction or

rubber objects on the device to avoid the risk of malfunction or

damage to surface of the device!

damage to surface of the device!damage to surface of the device!

damage to surface of the device!

7. The relay-output may be powered at max. 12 ! The current

7. The relay-output may be powered at max. 12 ! The current7. The relay-output may be powered at max. 12 ! The current

7. The relay-output may be powered at max. 12 ! The current

must not exceed 1 Ampere!

must not exceed 1 Ampere!must not exceed 1 Ampere!

must not exceed 1 Ampere!

8. All statements in this manual are subject to the fast

8. All statements in this manual are subject to the fast8. All statements in this manual are subject to the fast

8. All statements in this manual are subject to the fast

technological development. Our products are constantly

technological development. Our products are constantlytechnological development. Our products are constantly

technological development. Our products are constantly

enhanced. Technical changes, misprints and errors are reserved!

enhanced. Technical changes, misprints and errors are reserved! enhanced. Technical changes, misprints and errors are reserved!

enhanced. Technical changes, misprints and errors are reserved!

9. This product is not designed for use in life support appliances,

9. This product is not designed for use in life support appliances,9. This product is not designed for use in life support appliances,

9. This product is not designed for use in life support appliances,

devices, or systems where malfunction of this product can

devices, or systems where malfunction of this product candevices, or systems where malfunction of this product can

devices, or systems where malfunction of this product can

reasonably be expected to result in personal injury. Aqua

reasonably be expected to result in personal injury. Aquareasonably be expected to result in personal injury. Aqua

reasonably be expected to result in personal injury. Aqua

Computer customers using or selling this product for use in such

Computer customers using or selling this product for use in suchComputer customers using or selling this product for use in such

Computer customers using or selling this product for use in such

application do so at their own risk and agree to fully indemnify

application do so at their own risk and agree to fully indemnifyapplication do so at their own risk and agree to fully indemnify

application do so at their own risk and agree to fully indemnify

Aqua Computer GmbH & Co. KG for any damages resulting from

Aqua Computer GmbH & Co. KG for any damages resulting fromAqua Computer GmbH & Co. KG for any damages resulting from

Aqua Computer GmbH & Co. KG for any damages resulting from

such application.

such application.such application.

such application.

10. Do not rest your weight on or place heavy objects on the

10. Do not rest your weight on or place heavy objects on the10. Do not rest your weight on or place heavy objects on the

10. Do not rest your weight on or place heavy objects on the

device, and do not apply excessive force to the buttons, switches,

evice, and do not apply excessive force to the buttons, switches,evice, and do not apply excessive force to the buttons, switches,

evice, and do not apply excessive force to the buttons, switches,

or connectors to avoid the risk of damage to the device or

or connectors to avoid the risk of damage to the device oror connectors to avoid the risk of damage to the device or

or connectors to avoid the risk of damage to the device or

personal injury.

personal injury.personal injury.

personal injury.

Gelliehäuser Str. 1, 37130 Gleichen

MULTISWITCH

4. Connecting external components

4. Connecting external components4. Connecting external components

4. Connecting external components

4.1. Overview

4.1. Overview4.1. Overview

4.1. Overview

The following schematic shows the multitude of connection possibilities

of the multiswitch™:

4.2. Power connector

4.2. Power connector4.2. Power connector

4.2. Power connector

Attach a vacant power connector of your PSU. Due to the form of the

plug the polarity can not be misinterpreted. Do not use force when

connecting the plug but double check if the plug is lined-up correctly

(i.e. not upside down)

Pinassignment: Pin 1: +12

Pin 2: GND

Pin 3: GND

Pin 4: +5

4.3. USB

4.3. USB4.3. USB

4.3. USB

Connection possibility for an internal USB-connector on the

mainboard. Use the included USB-cable and pay close

attention to the polarity (colored wires) of the cable. Incorrect

IncorrectIncorrect

Incorrect

use may result in the destruction of the aquaero and/or the

use may result in the destruction of the aquaero and/or theuse may result in the destruction of the aquaero and/or the

use may result in the destruction of the aquaero and/or the

mainboard and further components

mainboard and further componentsmainboard and further components

mainboard and further components!

! Therefore pay close

attention to the pin assignment of the connectors on the mainboard.

Please consult the manual of your mainboard for help.

Pin assignment: Pin 1: GND black wire

Pin 2: GND black wire

Gelliehäuser Str. 1, 37130 Gleichen

MULTISWITCH

Pin 3: D+ green wire

Pin 4: D- white wire

Pin 5: CC red wire

4.4. aquabus (I

4.4. aquabus (I4.4. aquabus (I

4.4. aquabus (I2

2C-Bus)

C-Bus)C-Bus)

C-Bus)

3-pin add-on connector for optional add-on components by aqua-

computer. Only use cables specified by aqua-computer (not included in

delivery)!

Pin assignment: Pin 1: GND

Pin 2: SDA

Pin 3: SCL

4.5. Jumpers

4.5. Jumpers4.5. Jumpers

4.5. Jumpers

The five positions configure the different functions of the multiswitch™.

Appropriate short-circuit-bridges, so-called „Jumpers“, are included in

the delivery.

The individual functions may be derived from chapter 5. Configuration.

4.6. Power outputs 1/2

4.6. Power outputs 1/24.6. Power outputs 1/2

4.6. Power outputs 1/2

Screw clamps that allow the connection of up to eight consumer loads

to the power outputs of the multiswitch™. The outputs supply a

maximum of 12 at a maximal 1 amp per channel. The total load

The total load The total load

The total load must

mustmust

must

not

notnot

not be higher than 40 Watts.

be higher than 40 Watts. be higher than 40 Watts.

be higher than 40 Watts. Incorrect use may result in the destruction

Incorrect use may result in the destructionIncorrect use may result in the destruction

Incorrect use may result in the destruction

of the multiswitch™ and/or the mainboard and further components!

of the multiswitch™ and/or the mainboard and further components! of the multiswitch™ and/or the mainboard and further components!

of the multiswitch™ and/or the mainboard and further components!

Pin assignment: Terminal strip 1 contact 1: Output 8 +12 enabled

Terminal strip 1 contact 2: Output 8 GND

Terminal strip 1 contact 3: Output 7 +12 enabled

Terminal strip 1 contact 4: Output 7 GND

Terminal strip 1 contact 5: Output 6 +12 enabled

Terminal strip 1 contact 6: Output 6 GND

Terminal strip 1 contact 7: Output 5 +12 enabled

Terminal strip 1 contact 8: Output 5 GND

Terminal strip 2 contact 1: Output 4 +12 enabled

Terminal strip 2 contact 2: Output 4 GND

Terminal strip 2 contact 3: Output 3 +12 enabled

Gelliehäuser Str. 1, 37130 Gleichen

MULTISWITCH

Terminal strip 2 contact 4: Output 3 GND

Terminal strip 2 contact 5: Output 2 +12 enabled

Terminal strip 2 contact 6: Output 2 GND

Terminal strip 2 contact 7: Output 1 +12 enabled

Terminal strip 2 contact 8: Output 1 GND

NOTICE:

NOTICE:NOTICE:

NOTICE:

•When disabled the output voltage lies below 0,5

•When connecting inductive loads (e.g. motors), a self-induction

recuperation diode (Schottky) and a 100 nF capacitor need to be

connected to the consumer to prevent interferences with the

multiswitch™ and other connected devices. In isolated cases further

measures may be required.

•The outputs are not

notnot

not protected against overvoltage or short-circuits!

When connecting capacitive and inductive loads appropriate precaution

measures must be taken.

4.7. LED-outputs

4.7. LED-outputs4.7. LED-outputs

4.7. LED-outputs

Connection possibilities for up to eight LEDs. The LEDs are operated via

an into the multiswitch™ integrated series resistance of 100 Ω with 5 .

Ultra-bright LEDs (Imax 20 mA, U 3 ) may be connected without any

series resistance directly to the outputs, for LEDs with a low forward

voltage the additional series resistance is calculated as follows:

Additional series resistance = ((5 – forward voltage) / Imax) – 100 Ω

Pin assignment:

Pin 1: CC LED 1 Pin 2: GND LED 1

Pin 3: CC LED 2 Pin 4: GND LED 2

Pin 5: CC LED 3 Pin 6: GND LED 3

Pin 7: CC LED 4 Pin 8: GND LED 4

Pin 9: CC LED 5 Pin 10: GND LED 5

Pin 11: CC LED 6 Pin 12: GND LED 6

Pin 13: CC LED 7 Pin 14: GND LED 7

Gelliehäuser Str. 1, 37130 Gleichen

MULTISWITCH

Pin 15: CC LED 8 Pin 16: GND LED 8

All other pins (17-26) must not

must notmust not

must not be short circuited!

4.8. Relay

4.8. Relay4.8. Relay

4.8. Relay

Floating output. Freely usable, maximum breaking capacity 4 A at max.

12 .

Pin assignment: Pin 1: Opening contact (NC)

Pin 2: Common connector

Pin 3: Breaking contact (NO)

4.9. aquastream

4.9. aquastream4.9. aquastream

4.9. aquastream

Connection possibility to the controller of the aquastream. A maximum

of two aquastream-controller may be connected. The following chart

shows the connection possibilities depending on the hardware revision

of the controller:

Revision Controller 1

Revision Controller 1Revision Controller 1

Revision Controller 1 Revision Controller 2

Revision Controller 2Revision Controller 2

Revision Controller 2

1.0 or higher not possible

1.5 or higher 3.0 or higher

Gelliehäuser Str. 1, 37130 Gleichen

MULTISWITCH

5. Configuration

5. Configuration5. Configuration

5. Configuration

ia the five configuration-

jumpers (see chapter 4.5.

Jumper) you can

permanently configure

single functions of the

multiswitch™. For this

purpose the included short-

circuit-bridges („jumper“)

are either removed from the

contact pins (position „open“) or set on the contact pins (position

„closed“).

The individual positions have the following functions:

Jumper position 1:

Jumper position 1:Jumper position 1:

Jumper position 1: aquabus-address

aquabus-address aquabus-address

aquabus-address

This jumper configures the aquabus-adress of the multiswitch™ when

connected as a aquabus-device e.g. to the aquaero. When connected

as a USB-device this function is ignored.

Jumper open: Address multiswitch™ 1

Jumper closed: Address multiswitch™ 2

Jumper position 2: Save configuration

Jumper position 2: Save configurationJumper position 2: Save configuration

Jumper position 2: Save configuration

When this jumper is set, the current condition of the outputs are saved

with each keypress (supprted only in devices with buttons) and

automatically loaded after a reset of the system . Additionally a save via

the PC-software aquasuite is possible. If this function is deactivated, so

is the function in the aquasuite software!

Jumper open: Saving deactivated

Jumper closed: Speichern activated

Jumper position 3: Deactivate PWM function

Jumper position 3: Deactivate PWM function Jumper position 3: Deactivate PWM function

Jumper position 3: Deactivate PWM function

This jumper configures the output of PWM signals at the outputs of the

multiswitch™. In the default setting (jumper open) PWM signals are

generated at the outputs which allow for instance LEDs to be controlled

in brightness. You must

mustmust

must check if all

allall

all connected devices are able to

Gelliehäuser Str. 1, 37130 Gleichen

MULTISWITCH

handle PWM signals before

beforebefore

before you activate this function. Failure to do so

Failure to do soFailure to do so

Failure to do so

may result in the destruction of the connected devices!

may result in the destruction of the connected devices!may result in the destruction of the connected devices!

may result in the destruction of the connected devices!

If the multiswitch™ is used as an aquabus-device on the aquaero, the

PWM function is always deactivated and the jumper setting is ignored.

Jumper open: PWM activated

Jumper closed: PWM deactivated

Jumper position 4: Button function

Jumper position 4: Button functionJumper position 4: Button function

Jumper position 4: Button function

This jumper configures the functions of the buttons on the front of the

device (supprted only in devices with buttons).

When the jumper is set, the condition (on/off) of the corresponding

power output is switched. Additionally the outputs may be switched via

the PC-software if the multiswitch™ is connected via USB (not possible if

connected as an aquabus-device).

With an open jumper setting the buttons have no direct influence on the

outputs of the multiswitch™ and are only interpreted via the PC-software

when connected as an USB-device.

If the power outputs of the multiswitch™, when connected as an

aquabus-device to the aquaero, should be switched, the jumper must be

open!

Jumper open: Interpret buttons only via the PC-software

Jumper closed: Buttons switch power outputs directly

Jumper position 5: USB/aquabus

Jumper position 5: USB/aquabusJumper position 5: USB/aquabus

Jumper position 5: USB/aquabus

This jumper configures which interface of the multiswitch is active.

Jumper open: USB enabled, aquabus disabled

Jumper closed: aquabus enabled, USB disabled

Gelliehäuser Str. 1, 37130 Gleichen

Indice

Altri manuali Aqua Computer Accessori per computer

Aqua Computer

Aqua Computer AQUAERO 4.00 Manuale utente

Manuali Accessori per computer popolari di altre marche

Motorola

Motorola ATRIX Manuale utente

HP USB Media Docking Station Manuale utente

Cherry

Cherry B.UNLIMITED 3.0 Manuale utente

Logitech

Logitech IO2 Manuale utente

ARM

ARM DSTREAM-ST Manuale utente

Bartec

Bartec TC 7 Series Manuale utente

Philips

Philips SPC3540 Manuale utente

Logitech

Logitech mk220 Manuale utente

SilverStone

SilverStone LC02 Manuale utente

Flexispot

Flexispot ML2B Manuale utente

Hamlet

Hamlet UNIVERSAL COVER 101 KBT2 Manuale utente

Adam Equipment

Adam Equipment RS-485 Manuale utente

Vivo

Vivo MOUNT-KB05-4DW Manuale utente

Kvaser

Kvaser Memorator Professional Manuale utente

DRC

DRC D-Imaging Manuale utente

Sven

Sven Base 305 сombo Manuale utente

Hama

Hama 108310 Manuale utente

SpeechWare

SpeechWare FlexyMike FMK03 Manuale utente

Aqua Computer multiswitch 1.41 Manuale utente

Manuali Accessori per computer popolari di altre marche