Arashi Vision Insta360 Link Manuale utente
English · 简体中文 · Deutsch · Français · Italiano · Español
Pусский · Português · 日本語 · 한국어 · 繁體中文 ·
QUICKSTART GUIDE
快速入门指南
1
EN
2 Names of Parts
Touch
Key
Mics
1/4" Mounting Point
USB Type-C Port
Lens
Indicator
Light
Insta360 Link can be deployed in a number of ways, with
its built-in clip design allowing it to be clipped directly onto
a computer screen (as shown below) or placed on a flat
surface. The base has a 1/4" screw hole for use with a
stand/tripod.
3 Setting up Insta360 Link
Placement
1 Product Overview
Insta360 Link is an AI-powered 4K webcam with a 3-axis
gimbal. Using built-in AI algorithms, it can track your
movements to always keep you in frame. Specialized
modes for whiteboard enhancement, portrait live
streaming and more are also available. Link connects to
a computer via USB cable and can be mounted with the
built-in clip or ¼” mounting point. Link can be controlled
via its desktop software or gestures.
2
EN
Connecting to Insta360 Link
Insta360 Link is compatible with both Windows and
macOS. Please use the USB cable to connect it to your
computer's USB port. Once connected, the blue light
on the camera will flash. When it is fully powered on,
the blue light will be continuously illuminated. It will
automatically power off when unplugged.
Important:
1) To avoid issues due to insufficient power supply,
please connect Link directly to a computer or to a USB
hub with an independent power supply.
2) To avoid compatibility issues, please use the included
USB cable to connect Insta360 Link to your computer.
Installing Link Controller
As soon as you connect Insta360 Link to your computer
with the USB cable, you can use it immediately.
However, to adjust more settings, please visit https://
www.insta360.com/download/insta360-link to install
the free Link Controller software.
EN
3
Privacy Mode
Tracking Mode
Insta360 Link detects the presence of human faces in
the frame and tracks them with the gimbal as they move,
ensuring they are in the frame. The position, tracking
speed and frame size can be set in the Link Controller
software.
4 Modes
Gimbal
You can manually adjust the camera's gimbal during use
to adjust the position (except in Whiteboard Mode).
Touch Key
Double tap the touch key to return Insta360 Link's lens
to center and reset it to its initial state, as when just
switched on.
After 10 seconds in standby mode, the Insta360 Link
will automatically enter Privacy Mode. The camera lens
will point downwards to protect your privacy.
Whiteboard Mode
Link can detect and enhance whiteboard displays when
4
EN
When used with other
accessories, like a tripod,
Insta360 Link can be positioned
horizontally in Portrait Mode for
a better viewing and tracking
experience.
Portrait mode
When Portrait Mode is activated,
Insta360 Link automatically
positions the lens vertically to
capture uncropped 9:16 video.
It provides a better viewing
experience for mobile devices.
Portrait Mode can be enabled in
Link Controller under More Settings
- Streamer Mode.
you have applied the provided recognition markers to
the corners of a whiteboard (as shown below). Remote
users will be able to see the contents of the whiteboard
more clearly in this mode. This mode can be set up via
gestures and Link Controller.
5
EN
5 Gestures
Enter / Exit Tracking Mode
When your face is in the frame, make this
gesture until the camera's blue light flashes
rapidly, and the camera will switch the AI
tracking function on or off.
Overhead Mode
When connected to a suitable
accessory, Insta360 Link can be
set to Overhead Mode. In this
mode, Insta360 Link's lens will
automatically face downwards,
giving you a top-down view. You
can also manually adjust the
angle. You can activate this mode
via Link Controller.
DeskView can be enabled in Link
Controller. Once enabled, Insta360
Link will automatically adjust
its lens to a 45° angle to give a
clear and leveled overhead view
of your desk. To ensure a clear
view, ensure Insta360 Link is not
mounted at an over 100° angle in
relation to your desk.
6
6 Firmware Updates
Method 1: If there's a new firmware version available and
you've installed and opened the Link Controller software,
you'll be prompted to update as soon as connecting to
Insta360 Link. You can go to the More Settings page and
follow the onscreen instructions to finish the firmware
update.
Method 2:
1) Use the included USB cable to connect Insta360 Link
to your computer.
Note:
When performing gestures, please be careful not to cover
your face with your hands.
Enter / Exit Whiteboard Mode
Fix the whiteboard recognition markers to
the four corners of the whiteboard. When a
recognition marker is detected in the frame,
make this gesture until the camera's blue
light flashes rapidly and the camera will
enter or exit Whiteboard Mode.
EN
Adjust Zoom
When your face is in the frame, make this
gesture near your face until the camera's
blue light flashes rapidly, at which point the
zoom function is activated. To zoom in,
move your hand a short distance upwards
and hold it until the desired zoom is
achieved. To zoom out, move your hand a
short distance downwards and hold it. The
lens will zoom until no gesture is detected
or it has zoomed out completely.
7
Note: Do not disconnect the USB connection during the
firmware update.
Further Support
For more guidance, please scan the QR code
below or visit: https://www.insta360.com/support/
supportdetail?name=link .
EN
2) Tap the Touch Key three times and check that
the white light flashes. Then, press and hold the
Touch Key for 5 seconds. Once the white light is
continuously illuminated, the camera will have entered
update mode.
3) Download the firmware update file here https://
www.insta360.com/download/insta360-link from
Insta360's official website. Copy the file to the
Insta360 Link hard drive named "INSTA360".
4) Repeat step 2, and let Insta360 Link reboot. The
blue light will flash slowly when the firmware is being
updated.
5) After successfully updating, Insta360 Link will
return to its standard mode with the blue light
illuminated.
8
Device Status Indicator Status
Standby Solid blue
Streaming Solid green
Tracking mode Solid green (lower
brightness)
Whiteboard mode Solid yellow
Gesture successfully
recognized
Flashing blue
Gesture not available Flashing orange
Update mode Solid white
Firmware updating Slow flashing blue
Malfunction Solid red
Privacy mode Off
7 Indicator Status
EN
Indice
Lingue:
